Analisis Kinerja Alat Bor dalam Penyediaan Lubang Ledak untuk Mencapai Target Produksi Pembongkaran Overburden di Pit.7 PT. Insani Bara Perkasa Kabupaten Kutai Kertanegara Provinsi Kalimantan Timur
DOI:
https://doi.org/10.61132/globe.v4i2.1373Keywords:
Blast Hole, Drilling, Effectiveness, Operational, ProductivityAbstract
Blast hole drilling is an initial stage that plays a critical role in determining the success of blasting activities in mining and construction operations. Drilling quality directly affects rock fragmentation, drilling equipment efficiency, drilling equipment productivity, as well as blasting safety and costs. This study aims to analyze the influence of drilling parameters on blast hole quality, including hole diameter, drilling depth, hole inclination, and the suitability of drilling patterns with respect to the planned blasting design. The research methodology involves field observations, actual measurements of drill holes, and analysis of data obtained from drilling and blasting productivity. The results show that deviations in hole depth and direction can lead to irregular distribution of blasting energy, resulting in suboptimal rock fragmentation and an increased potential for flyrock and overbreak. In addition, the selection of appropriate drilling methods and equipment based on rock mass characteristics has been proven to improve productivity and blast hole quality. Therefore, controlling drilling parameters and implementing proper operational procedures are essential to enhance the overall effectiveness and productivity of blasting activities. This study is expected to serve as a reference for the planning and evaluation of blast hole drilling activities to achieve more efficient, safe, and economical operations.
References
Andris, G., Guskarnali, G., & Oktarianty, H. (2021). Kajian karakteristik massa batuan terhadap kecepatan pemboran alat bor Sandvik Ranger DX800. Jurnal Pertambangan, 5(1), 38–44. http://ejournal.ft.unsri.ac.id/index.php/JP
Ash, R. (1990). Design of blasting round, surface mining. In B. Kennedy (Ed.), Society for Mining, Metallurgy and Exploration.
Biya, D. A. (2022). Optimasi kinerja alat bor hydraulic crawler rockdrill Powerroc Atlas Copco T25 dalam mencapai target produksi pada tambang batu. Program Studi Teknik Pertambangan.
Bonmach, Q. D. (2019). The difference between 3 rock drilling methods: Rotary drilling, DTH drilling, and top hammer drill. https://medium.com/@qdbonmach/the-difference-between-3-rock-drilling-methods-rotary-drilling-dth-drilling-and-top-hammer-efe5789a08e2
Broch, E., & Franklin, J. A. (1972). The point-load strength test. International Journal of Rock Mechanics and Mining Sciences, 9(6), 669–676. https://doi.org/10.1016/0148-9062(72)90030-7
Einarsson, C., Norwood, D., Davidson, E., Lindberg, G., Cocchiola, J., Wallsten, M., Inge, M., Viberg, T., & Linder, U. (2012). Blasthole drilling in open pit mining (3rd ed.). Ulf Linder. www.atlascopco.com/blastholedrills
Franklin, J. A. (1985). Suggested method for determining point load strength. International Journal of Rock Mechanics and Mining Sciences, 22(2), 51–60. https://doi.org/10.1016/0148-9062(85)92327-7
Greminger, M. (1982). Experimental studies of the influence of rock anisotropy on size and shape effects in point-load testing. International Journal of Rock Mechanics and Mining Sciences, 19(5), 241–246. https://doi.org/10.1016/0148-9062(82)90222-4
Jimeno, C. (1995). Drilling and blasting of rocks (pp. 35–36). A.A. Bakema.
Kahfi, M. Z. (2021). Analisis awal pendugaan nilai UCS dari nilai PLI untuk batu lempung dan batu pasir, PT Arutmin Indonesia Tambang Asam Asam, Kalimantan Selatan. Prosiding TPT XXX dan Kongres XI PERHAPI, 27–36.
Koesnaryo, S. (1996). Pemboran untuk penyediaan lubang ledak. UPN “Veteran” Yogyakarta.
Koesnaryo, S. (2001). Rancangan peledakan batuan. Jurusan Teknik Pertambangan, UPN “Veteran” Yogyakarta.
Nuryadi, Astuti, T. D., Utami, E. S., & Budiantara, M. (2017). Buku ajar dasar-dasar statistik penelitian. Sibuku Media.
Prastio, O., Triantoro, A., Riswan, Kartini, & J. T., Y. P. (2017). Evaluasi pemboran lubang ledak pada tambang limestone. Jurnal GEOSAPTA, 2(2), 79–87. https://doi.org/10.20527/jg.v2i2.4212
Pujiyana, A. (2021). Optimasi kinerja alat bor dalam memenuhi target produksi 92 m³/jam batu andesit PT. Gunung Bumi Perkasa, Kabupaten Sukabumi, Jawa Barat.
Safitri, P. A., Marsudi, & Syafrianto, M. K. (2014). Produktivitas mesin bor JUNJUN JD-800 dalam pembuatan lubang ledak pada tambang batu granodiorit di PT. Total Optima Prakarsa Desa Peniraman Kecamatan Sungai Pinyuh Kabupaten Mempawah. Teknik Pertambangan, 126–132.
Saputra, R. A., Nugroho, W., & Trides, T. (2020). Evaluasi kinerja alat bor dalam penyediaan lubang ledak untuk mencapai target produksi pembongkaran overburden di PT. Sims Jaya Kaltim Site PT. Kideco Jaya Agung Kalimantan Timur. Jurnal Teknologi Mineral FT UNMUL, 8(1), 14–21.
Sihombing, H. (2016). Kegiatan pemboran dalam pembuatan lubang ledak pada tambang andesit PT. Ansar Terang Crushindo Sumatera Barat. Institut Teknologi Medan, 1(12).
Supratman, S., Anshariah, A., & Bakri, H. (2017). Produktivitas kinerja mesin bor dalam pembuatan lubang ledak di quarry batugamping B6 Kabupaten Pangkep Propinsi Sulawesi Selatan. Jurnal Geomine, 5(2), 59–63. https://doi.org/10.33536/jg.v5i2.127
Tamrock. (1987). Surface drilling and blasting.
Umar, E. F., Syahrudin, & Syafrianto, M. K. (2020). Kajian produktivitas mesin bor Furukawa Rock Drill PCR 200 dalam penyediaan lubang ledak pada penambangan batu andesit PT. Sulenco Wibawa Perkasa Kabupaten Mempawah Provinsi Kalimantan Barat. JeLAST: Jurnal PWK, Laut, Sipil, Tambang, 6(3), 1–8.
Wakim, A. P., & Cahyono, Y. D. G. (2020). Kajian teknis alat bor untuk pembuatan lubang ledak pada tambang batu gamping di PT. Pertama Mina Sutra Perkasa Kabupaten Jember Provinsi Jawa Timur. Prosiding Seminar Teknologi Kebumian dan Kelautan, 2(1), 625–628.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
