Analisis Pengaruh Mineral terhadap Nilai Kuat Tekan Batuan

Noviandra Eko Putra; Shalaho Dina Devy; Agus Winarno

doi:10.61132/konstruksi.v2i3.406

Authors

Noviandra Eko Putra Universitas Mulawarman
Shalaho Dina Devy Universitas Mulawarman
Agus Winarno Universitas Mulawarman

DOI:

https://doi.org/10.61132/konstruksi.v2i3.406

Keywords:

Minerals, Rock Compressive Strength Value, Rock Composing Composition

Abstract

To determine the mineral content and composition of a rock, a petrographic test is carried out using a thin section method. Petrographic test is known as an efficient test of time and energy with accurate results in obtaining the composition and mineral content of rocks. The Point Load test is an index test that has been widely used to predict the UCS value of a rock indirectly in the field. This is due to the simple test procedure, easy sample preparation and can be done in the field, so that the strength of the rock can be quickly known in the field before testing in the laboratory.

References

Agus, S., Hartono, E., & Willis, D. (2018). Muntohar stabilisasi siltstone menggunakan semen dalam tinjauan durabilita. Yogyakarta: Fakultas Teknik Universitas Muhammadiyah Yogyakarta.

Ariani, E. (2015). Geologi untuk pertambangan umum. Yogyakarta: Graha Ilmu.

Arief, I. (2016). Geoteknik tambang. Jakarta: PT Gramedia Pustaka Utama.

Biantoro, E. D. (1992). Inversion faults as the structural control in the northern part of the Kutai Basin East Kalimantan. Jakarta.

Brown, E. T. (2005). Rock mechanics for underground mining. United States of America.

Farhan, R. (2019). Penetuan parameter-parameter untuk menentukan isi awal minyak ditempat secara volumetrik pada reservoir X. Jakarta: Fakultas Teknologi Kebumian dan Energi Universitas Trisakti.

ISRM. (1979). Suggested methods for determining the uniaxial compressive strength and deformability of rock materials. International Society for Rock Mechanics Commission on Standardization of Laboratory and Field Tests, 137-140.

Kramadibrata, S., Rai, M., & Wattimena, R. (2010). Mekanika batuan laboratorium geomekanika dan peralatan tambang. Bandung: Institut Teknologi Bandung.

Satyana, A. H., Nugroho, D., & Surontoko, I. (1999). Tectonic control on the hydrocarbon habitats of the Barito, Kutei, and Tarakan Basins, Eastern Kalimantan, Indonesia: Major dissimilarities in adjoining basins. Journal of Asian Earth Sciences, 111-121.

Yuwono, S. (2012). GL 3141 Petrografi. Bandung: ITB Press.