Analisis Risiko Kecelakaan pada Pembuatan Produksi Tempe dengan Menggunakan Penerapan Metode HAZOP di CV Suryadi Sentosa

Ahmad Farozi Eka Chandra; Assifa Rizqiyah Fitriani; Adi Sukma Maulana; Budiharjo Budiharjo

doi:10.61132/manufaktur.v3i3.1166

Authors

Ahmad Farozi Eka Chandra Universitas Bina Bangsa
Assifa Rizqiyah Fitriani Universitas Bina Bangsa
Adi Sukma Maulana Universitas Bina Bangsa
Budiharjo Budiharjo Universitas Bina Bangsa

DOI:

https://doi.org/10.61132/manufaktur.v3i3.1166

Keywords:

Danger, Hazop, Likelihood, Risk, Severity

Abstract

The Hazard and Operability (HAZOP) methodology is a qualitative risk analysis technique commonly used to detect potential work hazards. CV. Suryadi Sentosa, also known as Bapak Suryadi's Home Tempe Industry, is a home-based business that produces tempeh. Almost all of the production procedures are still carried out manually, and occupational accident analysis measures have not been implemented. The factory conditions indicate inadequate lighting and ventilation, as well as relatively slippery floors. It is also observed that the industry workers do not pay much attention to their posture, and they do not use personal protective equipment (PPE). This research was conducted directly at the CV. Suryadi Sentosa Tempe Factory, using interviews and observations of seven workers involved in the production process. The steps taken in this study are compiling the sequence of the production process. By using a Hazard and Operability (HAZOP) worksheet, identify potential risks, conduct risk control analysis, monitor and evaluate, implement improvements, and draw conclusions. The analysis found 9 stages of tempeh production at Mr. Suryadi's facility. Several improvements are needed, including involving several workers to handle soybean processing, creating ventilation to provide good and healthy air circulation for workers, adding lighting as a light source so that workers can perform their tasks comfortably, and using ergonomic chairs and work tables to prevent fatigue and increase factory productivity.

References

Aditya, R., & Saputra, D. (2020). Pengaruh penerapan SOP dan HAZOP terhadap kinerja keselamatan kerja. Jurnal Sistem dan Manajemen Industri, 4(2), 91–99.

Anwar, C., Tambunan, W., & Gunawan, S. (2019). Analisis kesehatan dan keselamatan kerja (K3) dengan metode hazard and operability study (HAZOP). Journal of Mechanical Engineering and Mechatronics, 4(2), 61. https://doi.org/10.33021/jmem.v4i2.825

Arifin, M. F., & Kurniawan, D. (2023). Efektivitas analisis HAZOP dalam sistem keamanan proses produksi logam. Jurnal Teknik & Keamanan Industri, 11(1), 34–42.

Collins, S. P., Storrow, A., Liu, D., Jenkins, C. A., Miller, K. F., Kampe, C., & Butler, J. (2021). No title. Journal Name, 3(12), 167–186.

Firdaus AK, D. S., Widodo, L., & Adianto, A. (2023). Implementasi risiko kecelakaan kerja pada proses produksi makanan ringan dengan menggunakan metode HIRARC, HAZOP, dan FMEA (Studi kasus: PT Indofood Fortuna Makmur). Jurnal Serina Sains, Teknik dan Kedokteran, 1(1), 199–210. https://doi.org/10.24912/jsstk.v1i1.27155

Firmansyah, A. R. (2021). Evaluasi bahaya dan operabilitas pada sistem peleburan logam menggunakan HAZOP. Jurnal Sistem Teknik Industri, 9(2), 66–74.

Fitriani, N. (2022). Integrasi HAZOP dan K3 dalam sistem produksi industri logam ringan. Jurnal Kesehatan Kerja Nasional, 7(1), 15–23.

Ginting, N. S. Br., & Kristiana, R. (2020). Analisis efektivitas pengendalian risiko kecelakaan kerja pada pekerja proyek konstruksi menggunakan metode Fine dan fault tree analysis. Teknik, 41(2), 192–200. https://doi.org/10.14710/teknik.v39i3.20265

Hanifah, N., & Wirawan, B. (2022). Evaluasi sistem keselamatan kerja dengan HAZOP: Studi kasus di pabrik logam. Jurnal Teknologi dan Keselamatan Kerja, 6(1), 55–63.

Lestari, I. A., & Nugroho, H. (2020). Analisa risiko kecelakaan kerja di industri baja menggunakan pendekatan HAZOP. Jurnal Rekayasa Sistem Industri, 12(3), 210–218. https://doi.org/10.52822/jwk.v3i2.78

Oktaviani, L. M., & Hasan, B. (2019). Peran HAZOP dalam analisa risiko operasional industri baja. Jurnal Teknologi Industri, 15(3), 215–224.

Prasetyo, A., & Wibowo, R. (2019). Penerapan metode HAZOP dalam identifikasi potensi bahaya pada industri manufaktur. Jurnal Teknik dan Keselamatan, 8(2), 87–96.

Rahmawati, D. (2020). Analisis risiko keselamatan proses produksi dengan metode HAZOP di industri kimia. Jurnal Teknik Industri UNDIP, 12(1), 45–53.

Ramadhan, F., & Susanti, L. (2021). Studi penerapan HAZOP dalam pabrik logam. Jurnal Teknik Mesin Indonesia, 13(2), 135–144.

Sari, S., Ramadanti, A. W., Audini, M., Deani, R. S., Saputro, P., & Wardhani, K. (2022). Analisis risiko kesehatan dan keselamatan kerja di pabrik tempe Bapak Carmin dengan menggunakan metode hazard and operability study (HAZOP). Journal of Industrial Engineering, 7(1), 31–40.

Suryanto, T., & Putri, N. M. (2021). Implementasi HAZOP untuk mengurangi risiko ledakan di industri peleburan. Jurnal Energi dan Proses, 9(2), 132–141.

Wagiman, M. A., & Yuamita, F. (2022). Analisis tingkat risiko bahaya kerja menggunakan metode HAZOP (hazard and operability) pada PT Madubaru PG/PS Madukismo. Jurnal Teknologi dan Manajemen Industri Terapan, 1(4), 277–285. https://doi.org/10.55826/tmit.v1iiv.34

Yuliana, D. (2018). Manajemen risiko K3 dalam proses produksi baja ringan. Jurnal Teknik Industri & K3, 5(1), 40–47.