Analisa Perbandingan Hasil Pengelasan GTAW dan SMAW pada Pipa A36 dengan Metode Uji Radiografi

Muhammad Zulfikar; Maryadi Maryadi; Arifiansah Arifiansah; Tugiman Fahrudin

doi:10.61132/venus.v3i4.1062

Authors

Muhammad Zulfikar Universitas Islam As-Syafi’iyah
Maryadi Maryadi Universitas Islam As-Syafi’iyah
Arifiansah Arifiansah Universitas Islam As-Syafi’iyah
Tugiman Fahrudin Universitas Islam As-Syafi’iyah

DOI:

https://doi.org/10.61132/venus.v3i4.1062

Keywords:

GTAW, Joint Quality, Radiographic Testing, SMAW, Welding

Abstract

This study aims to analyze the welding results between two commonly used methods, namely Gas Tungsten Arc Welding (GTAW) and Shielded Metal Arc Welding (SMAW), using radiographic testing methods. Welding is an important process in industry that affects the quality and strength of metal joints. In this study, we will examine the quality of welding results from both methods through radiographic testing, which serves to detect defects in welded joints. The GTAW method is known for its cleaner results and minimizes defects, while SMAW is often used because of its convenience and lower cost. The welding process is a crucial factor in ensuring the durability and performance of metal structures, and selecting the right welding method is essential for specific industrial applications. This study will compare the two methods based on the results of radiographic and tensile tests, evaluating factors such as weld strength, defect occurrence, and structural integrity. The analysis will also examine the advantages and disadvantages of each method in terms of weld quality, cost-effectiveness, and practical applications in different industries. It is hoped that the results of this study can provide deeper insights into the selection of the right welding method for industrial applications, as well as contribute to the development of welding technology. Furthermore, the findings will support improvements in quality control and provide a scientific basis for future welding practices in various manufacturing sectors.

References

Antaqiya, F.M.A., Budiarto, U., & Jokosisworo, S. (2019). Analisa Pengaruh Variasi Proses Preheating Pada Pengelasan Shielded Metal Arc Welding (SMAW) Terhadap Kekuatan Tarik dan Struktur Mikro Baja ST 60. Jurnal Teknik Perkapalan, 7(4), 334-344. https://ejournal3.undip.ac.id/index.php/naval/article/view/24351

Dharma, S., Suherman, Sarjianto, Sembayang, R., & Kurniyanto, H.B. (2022). Pengaruh Kuat Arus Terhadap Sifat Mekanis Pada Aluminium Al-Si-Fe Dengan Filler Er 4043 Metode Pengelasan GTAW. Jurnal Rekayasa Mesin, 17(1), 103-112. https://doi.org/10.32497/jrm.v17i1.3068

Hamid, A. (2016). Analisa Pengaruh Arus Pengelasan SMAW Pada Material Baja Karbon Rendah Terhadap Kekuatan Material Hasil Sambungan. Jurnal Teknologi Elektro, 7(1), 26-36. http://dx.doi.org/10.22441/jte.v7i1.813

Herizal, Hasrin, & Hanif. (2020). Analisa Pengaruh Proses GTAW dan SMAW Terhadap Ketangguhan Sambungan Pengelasan Material AISI 1050. Journal of Welding Technology, 2(1), 19-25. http://dx.doi.org/10.30811/jowt.v2i1.1954

https://www.neliti.com/publications/141149/pengaruh-kuat-arus-listrik-pengelasan-terhadap-kekuatan-tarik-dan-struktur-mikro

Manguluang, Z., Jamaluddin, Noya, A.D.D., & Fitrah, M.A. (2017). Pengaruh Hasil Las Kombinasi (GTAW dan SMAW) Pada Sambungan Pipa Carbon Steel Posisi 6G Terhadap Uji Radiografi dan Uji Tarik di Energy Equity Epic (Sengkang) Pty. Ltd. Iltek: Jurnal Teknologi, 12(2), 1780-1784.

Mulyatno, I. P., & Jokosisworo, S. (2008). Analisis Kekuatan Sambungan Las SMAW (Shielded Metal Arc Welding) Pada Marine Plate ST 42 Akibat Faktor Cacat Porositas dan Incomplete Penetration. Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan, 5(2), 102-113. https://doi.org/10.14710/kpl.v5i2.3193

Naufal, A., Jokosisworo, S., & Samuel. (2016). Pengaruh Kuat Arus Listrik dan Sudut Kampuh V Terhadap Kekuatan Tarik dan Tekuk Aluminium 5083 Pengelasan GTAW. Jurnal Teknik Perkapalan, 4(1), 256-264. http://ejournal3.undip.ac.id/index.php/naval

Parekke, S. (2017). Pengaruh Variasi Arus Pada Pengelasan SMAW dan GTAW Terhadap Sifat Mekanis dan Fisis Pada Logam Berbeda Baja Karbon Sedang Dengan Baja Tahan Karat Austenit. Dinamika Jurnal Ilmiah Teknik Mesin, 9(1), 12-19. https://core.ac.uk/download/pdf/298931799.pdf

Purwanto, A., Wijoyo, & Riyadin, A.F. (2023). Pengaruh Polaritas Mesin Las Pada Pengelasan SMAW (Shielded Metal Arc Welding) Terhadap Sifat Fisik dan Mekanik Baja Karbon Rendah. Jurnal Teknik Indonesia, 2(4), 150-158. https://doi.org/10.58860/jti.v2i4.238

Rahmatika, A., Ibrahim, S., Hersaputri, M., & Aprilia, E. (2019). Studi Pengaruh Variasi Kuat Arus Terhadap Sifat Mekanik Hasil Pengelasan GTAW Aluminium 1050 Dengan Filler ER 4043. Jurnal Polimesin, 17(1), 47-54. http://dx.doi.org/10.30811/jpl.v17i1.731

Rohmat, I.K., Amri, M.S., Muzzakki, M.H., Kurniyanto, H.B., Mukhlis, & Munir, M.M. (2023). Perbandingan PWHT dan Non PWHT Pada Pengelasan Material SA-213 Grade T91 Dengan SA-213 Grade T22 Terhadap Struktur Mikro dan Kekerasan. Jurnal Rekayasa Mesin, 18(1), 45-54. https://doi.org/10.32497/jrm.v18i1.4171

Santoso, T.B., Solichin, & Hutomo, P.T. (2015). Pengaruh Kuat Arus Listrik Pengelasan Terhadap Kekuatan Tarik dan Struktur Mikro Las SMAW Dengan Elektroda E7016. Jurnal Teknik Mesin, 23(1), 56-64.

Sarifudin, M., & Tjahjanti, P.H. (2024). Karakteristik Pengelasan Shield Metal Arc Welding (SMAW) dan Gas Tungsten Arc Welding (GTAW) Pada Plat Stainless Steel 201 di Tabung Air Minum. Innovative Technologica: Methodical Research Journal, 3(1), 1-10. https://doi.org/10.47134/innovative.v3i1.98

Sugeng, S., & Sulaiman. (2019). Analisa Proses Penyambungan Hull Construction Dengan Superstructure Kapal Dari Material Yang Berbeda. Jurnal Rekayasa Mesin, 14(2), 63-70. https://doi.org/10.32497/rm.v14i2.1515

Sulaiman, Utomo, B., & Wijana, I.P.A.A. (2020). Analisis Uji Tidak Merusak Pada Sambungan Las Lambung Frame 103 Bagian Kamar Mesin Kapal Patroli 73 Dengan Metode Radiography Test. Gema Teknologi, 20(4), 146-152. https://doi.org/10.14710/gt.v20i4.28516