Analisis Prioritas dan Strategi Perawatan Mesin Bubut Menggunakan Metode Failure Mode And Effect Analysis (FMEA) dan Diagram Pareto Di PT XYZ

Qanita Zahira Muhar Arifin; Akmal Suryadi

doi:10.61132/venus.v1i5.114

Authors

Qanita Zahira Muhar Arifin UPN “Veteran” Jawa Timur
Akmal Suryadi UPN “Veteran” Jawa Timur

DOI:

https://doi.org/10.61132/venus.v1i5.114

Keywords:

FMEA, Lathe, Maintenance, RPN

Abstract

PT The lathe is one of the essential machines in production activities in this company. The amount of downtime caused by machine failure will reduce product quality and quantity. Therefore, this research aims to identify the factors that most influence the risk of lathe failure so that repair priorities and maintenance strategies can be determined. This can be achieved by using the Failure Mode and Effect Analysis (FMEA) method. FMEA is a method that can be used to identify the causes and impacts of each possible failure mode on machine components by systematically explaining the levels of failure so that appropriate prevention or repair can be carried out. The FMEA method shows the Risk Priority Number (RPN) value as a reference in determining the choice of maintenance strategy, namely, predictive maintenance, preventive maintenance or corrective maintenance. The research results show that the highest RPN value is found in the motor shaft pulley component at 320 and Nut Screw at 210. Maintenance priorities are determined based on the Pareto diagram principle. The appropriate maintenance strategy carried out by PT.

Keywords: FMEA, Lathe, Maintenance, RPN

References

Al Hakiki, S. H. & Dwisetiono. (2021). Lubricating System Analysis Using the FMEA Method to Determine System Failure, zonalaut, 2(3), 99-105, https://journal.unhas.ac.id/index.php/zonalaut/article/view/18594

Alwi, M., Yusuf, Z., ., B., Klara, S., Hariyanto, S., Sitepu, A., Rivai, H., Nikmatullah, M., & Shintarahayu, B. (2022). Pemberdayaan Masyarakat Nelayan Melalui Pelatihan Perawatan Berkala Mesin Kapal di Desa Galesong Kota Kabupaten Takalar. JURNAL TEPAT : Teknologi Terapan Untuk Pengabdian Masyarakat, 5(1), 81-89, https://eng.unhas.ac.id/tepat/index.php/Jurnal_Tepat/article/view/214

Irfanto, R. (2022). The Analysis Cause Of Casting Repair Work With Pareto Chart In Project X. Jurnal Teknik Sipil, 18(1), 106 – 117, https://journal.maranatha.edu/index.php/jts/article/view/4485/2140

Munawir, H., Ulfa, R. M., & Djunaidi, M. (2020). Analisa Risiko Kegagalan Terhadap Downtime pada Line Crank Case Menggunakan Metode Failure Mode Effect Analysis. Prosiding IENACO, 8, 149 – 156, https://publikasiilmiah.ums.ac.id/handle/11617/11946

Tarigan, P., Ginting, E., Siregar, I. (2013). Perawatan Mesin Secara Preventive Maintenance Dengan Modularity Design Pada PT. Rxz. Jurnal Tek. Ind. USU, 3(3), 35 – 39, https://www.neliti.com/publications/219447/perawatan-mesin-secara-preventive-maintenance-dengan-modularity-design-pada-pt-r

Ramadhan, W. D. & Nurhidayat, A. E. (2022). Analisis Perawatan Mesin dengan Menggunakan Metode Reability Centered Maintenance dan Fuzzy Fuzzy Failure Mode and Effect Analysis. Jurnal Indonesia Sosial Teknologi, 3(08), 867–878, https://jist.publikasiindonesia.id/index.php/jist/article/view/474/849

Siregar, I. & Nasution, A. A. (2018). Component identification the causes of machinery damage in pharmacy company using Pareto diagram. IOP Conf. Ser.: Mater. Sci. Eng, 420, https://iopscience.iop.org/article/10.1088/1757-899X/420/1/012139/meta

Situngkir, D. I., Gultom, G., Tambunan D. R. S. (2019). Pengaplikasian FMEA untuk Mendukung Pemilihan Strategi Pemeliharaan pada Paper Machine. Flywheel: Jurnal Teknik Mesin Untirta, V(2), 39 – 43, https://jurnal.untirta.ac.id/index.php/jwl/article/view/5489

Waeyenbergh, G & Pintelon, L. (2002). A Framework formaintenance concept development. Int.J. Production Economics, 77, 299 – 313, https://www.sciencedirect.com/science/article/abs/pii/S0925527301001566

Yaqin, R. I., Zamri, Siahaan, J. P., Priharanto, Y. E., Alirejo, S., & Umar, M. L. (2020). Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo. Jurnal Rekayasa Sistem Industri, 9(3), 189-199, https://journal.unpar.ac.id/index.php/jrsi/article/view/4075