Implementasi Sistem Hidrolik Pada Mesin Spandek Produksi di PT Primaland

Juniwan Juniwan; Endi Permata

doi:10.61132/venus.v2i3.287

Authors

Juniwan Juniwan Universitas Sultan Ageng Tirtayasa
Endi Permata Universitas Sultan Ageng Tirtayasa

DOI:

https://doi.org/10.61132/venus.v2i3.287

Keywords:

Silinder, System Hidrolik, Industry, Kontruksi Baja Ringan

Abstract

The purpose of this journal article is to provide research findings regarding the application of automated production control system theory to the construction industry. from expediting work processes. The method used in this research is to observe the production process of a Primalland light steel construction company in real time. Please note, raw materials can be obtained from literature studies, with a focus on their implementation in industrial processes. There are many challenges in the development sector in Indonesia, both in terms of quality and quantity, PT. PrimaLand Light Steel Frame was founded on December 25 2008 in Pandeglang. Based on the research that has been carried out, the data obtained from this research is then analyzed in detail to determine whether there is a significant difference between price changes that affect sales volume and price changes that affect sales volume. Research on sales volume at PT PrimaLand Pandeglang between 2014 - 2016. PrimaLand light steel tries as best as possible to maintain the quality of the roof truss profile produced by using high quality steel coils, or what can be called High Tension, namely with a yield strength range of Mega Pascal 400 Mpa – 500 Mpa and generally standard G550, or reaching 2x the strength from conventional melted steel which is more than 240 Mpa.

References

DAFTAR PUSTAKA

Al Haramain, M., Effendi, R., & Susilo, H. A. (2017). Perancangan Silinder Hidrolik pada Mesin Molding Karet dengan Kapasitas 25 Ton. SINTEK JURNAL Jurnal Ilmiah Teknik Mesin, 11(1), 55-61.

Andry, A., Ivanto, M., & Lubis, G. S. Rancang Bangun Mesin Press Hidrolik Berkapasitas 5 Ton. JTRAIN Jurnal Teknologi Rekayasa Teknik Mesin, 5(1), 01-06.

Anzip, A., Sampurno, B., Suhariyanto, S., Wardana, P. K., & Faizaturrohmah, A. L. (2018). RANCANG BANGUN MESIN PEMBUAT SENGKANG PERSEGI DENGAN SISTEM HIDROLIK. Prosiding SENIATI, 4(3), 47-58.

Bhirawa, W. T. (2021). Sistem Hidrolik Pada Mesin Industri. Jurnal Teknologi Industri, 6.

Dahlan, M., Amaluddin, M. N. H., Sulfiana, E., & Assagaf, I. P. A. (2023, December). STUDI ANALISIS KEKUATAN RAGUM DENGAN MENGGUNAKAN SISTEM HIDROLIK. In Prosiding Seminar Nasional Teknologi Indu

Gunawan, M. I. (2019). Sistem Kendali Otomatis Pada Mesin-Mesin Industri Untuk Peningkatan Efektivitas Dan Efisiensi Kerja. Jurnal Tedc, 9(2), 110-116.

http://repository.uinbanten.ac.id/1970/6/BAB%20IV.pdf

https://www.ciptahydropower.com/cara-kerja-hidrolik/

Muhlis, M., & Rustang, R. (2022). PENGEMBANGAN SISTEM PENGEREMAN HIDROLIK PADA MESIN UJI IMPAK DI LABORATROIUM MEKANIK. In Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat (SNP2M)

Prasetyo, A., Lukmandono, L., & Dewi, R. M. (2021, October). Pengendalian Kualitas pada Spandek dengan Penerapan Six Sigma dan Kaizen untuk Meminimasi Produk Cacat (Studi Kasus: PT. ABC). In Prosiding Seminar Nasional Sains dan Teknologi Terapan (Vol. 9, No. 1, pp. 29-34).

Ramadhan, C. V., & Robbi, N. (2022). Analisis Pengerollan dengan Sistem Hidrolik pada Mesin Roll Bending Portable. RING Mechanical Engineering, 2(2), 126-131.

Thohirin, M., Wisnaningsih, W., Pambudi, A., Santoso, A. B., & Hertanto, F. S. (2023). Rancang Bangun Mesin Press Kelapa Sawit Sederhana Menggunakan Sistem Hidrolik Kapasitas 15 Kg. Teknika Sains

Wibowo, T. A., Raharjo, W. P., & Kusharjanta, B. (2014). Perancangan dan analisis kekuatan konstruksi mesin tekuk plat hidrolik. Mekanika, 12(2).

Wijayanto, D. S., Kristanto, Z., Yogatama, M. A., Widyawati, L., Dewi, A. K., & Lathifah, F. N. Pengoptimalan Fungsi Magnetik dan Sistem Hidrolik pada Alat Penyangga Mesin Mobil dalam Menerapkan