Studi Drilling Rate Index (DRI) Pada Batulempung dan Batupasir Formasi Balikpapan PT. RCI Job Site Abk Kecamatan Loajanan Kabupaten Kutai Kartanegara Provinsi Kalimantan Timur

Fadli Fadli; Agus Winarno; Tommy Trides

doi:10.61132/venus.v2i4.400

Authors

Fadli Fadli Univertsitas Mulawarman
Agus Winarno Universitas Mulawarman
Tommy Trides Universitas Mulawarman

DOI:

https://doi.org/10.61132/venus.v2i4.400

Keywords:

Sandstone, Mudstone, Balikpapan Formation, Drilling Rate Index, Brittleness, SJ value.

Abstract

Drilling is an essential operation in mining activities, particularly in borehole preparation for blasting purposes. The efficiency of blasting hole preparation depends significantly on the drilling speed to penetrate the rock formations.Drilling Rate Index (DRI) measures the ease or difficulty of drilling through rock formations. It combines two tests: Brittleness (S20) and SJ value. DRI serves as a common metric to predict drilling capabilities and is classified according to a table classification of drilling rate index.The classification of DRI values for sandstone and mudstone of Balikpapan Formation at PT. RCI Job Site ABK indicates a very high classification with DRI values ranging from 66 to 86. Testing results for samples SBP1 (DRI 75.9), SBP2 (DRI 81.7), SBL1 (DRI 66.6), and SBL2 (DRI 71.1) all fall within the very high classification range.

References

Anggara, R. (2017). Modul Praktikum Peralatan Pengeboran Tambang Bawah Tanah. Bandung: Program Studi Teknologi Pertambangan, Politeknik Energy dan Pertambangan Bandung.

Bruland, A. (2000). Hard Rock Tunnel Boring. Trondheim, Norway: Norwegian University of Science and Technology (NTNU).

Har, R. (2016). Geologi Pertambangan. Medan: Kementrian Pendidikan dan Kebudayaan.

Karrari, S. S., et al. (2022). Estimation of Drilling Rate Index Values of Granitic Rock with Their Mineralogical Properties Using Different Estimation Models. Arabian Journal of Geoscience.

Koesnaryo, S. (2001). Pemboran untuk Penyedia Lubang Ledak. Yogyakarta: Fakultas Teknologi Mineral, Jurusan Teknik Pertambangan, UPN Veteran Yogyakarta.

Rai, M. A., Kramadibrata, S., & Wattimena, R. K. (2014). Mekanika Batuan. Bandung: Institut Teknologi Bandung Press. ISBN: 978-623-7165-84-2.

Yarali, O., et al. (2014). Evaluation of The Relationships Among Drilling Rate Index (DRI) Mechanical Properties, Cerchar Abrasivity Index and Specific Energy for Rock. Mining Engineering Department, Bulent Ecevit University, Turkey.