Analisis Faktor – Faktor Berpengaruh Pada Proses Treatment Pengolahan Limbah Minyak Mentah Pada PT. Wastec Internasional
DOI:
https://doi.org/10.61132/venus.v3i3.961Keywords:
Waste Oil Processing, Quality Failure, DMAIC Method, Sigma Value, Basic Sediment and Water (BS&W)Abstract
The research took place at Wastec Internasional Company, a company engaged in environmental waste processing services. The oil from the crude oil waste processing treatment process still has Basic Sediment and Water (BS&W) content and oil content that is too high so that it cannot reach the established standards so that the company must make efforts to reduce waste from the production process. The purpose of the study was to determine the sigma value, the number of defects and factors causing quality failure in crude oil processing treatment at PT Wastec Internasional. The methods used are the DMAIC method, control maps and fishbone diagrams. The calculation results obtained an average BS & W sigma value of 3.4 and an oil content sigma value of 3.29. The average number of defects for BS&W was 9.075% and for oil content was 2113 mg/L. The factors causing treatment quality failure are material, method and environmental factors.
References
Anonim. (2017, April). Basic design description topside sea water and cooling water system Jakarta: PT “X” di Selat Makassar.
Eni. (2024, Desember 28). Eni Indonesia. Wikipedia. https://id.wikipedia.org/wiki/Eni
Eni. (2024, Desember 28). Indonesia. Eni. https://www.eni.com/en-IT/actions/global-activities/indonesia.html
Hadipriyana. (2024, Desember 26). Data komponen heat exchanger tipe plat. Politeknik Negeri Bandung. https://digilib.polban.ac.id/files/disk1/228/jbptppolban-gdl-hadipriyan-11377-3-bab2--9.pdf
My Villages Baros. (2024, Desember 26). Data tentang heat exchanger tipe plat. https://myvillagesbaros.blogspot.com/2017/07/plate-and-frame-heat-exchanger-uht.html
Nolan, D. P. (2011). Of fire and explosion protection engineering principles. Elsevier.
Pratama, R. H. (2009). Risk assessment tanker LNG dalam studi kasus supply LNG dari ladang Tangguh ke Teluk Benoa Bali [Skripsi, Institut Teknologi Sepuluh Nopember].
Shah, K. J., & Sekulic, D. P. (2003). Fundamentals of heat exchanger design (1st ed.). Wiley.
Soegiono, K. B. A. (2013). Transportasi LNG Indonesia. Airlangga University Press.
Standart, B. (2001). Hazard and operability studies (HAZOP studies): Application guide. International Electrotechnical Commission.
Sudiasih, L. (2018). Fire risk assessment for conceptual design of FSRU Jayapura [Skripsi, Institut Teknologi Sepuluh Nopember].
Thulukkanam, K. (2013). Heat exchanger design handbook (2nd ed.). CRC Press.
Tin, H. T. (2014). Application of quantitative risk assessment approach on offshore oil & gas industry. Ho Chi Minh City University of Technology.
Wang, L., Sundén, B., & Manglik, R. M. (2007). Plate heat exchangers: Design, applications and performance (1st ed.). WIT Press.
Wikipedia. (2024, Desember 25). Penukar panas. https://id.wikipedia.org/wiki/Penukar_panas
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Venus: Jurnal Publikasi Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
