Identifikasi Penurunan Kinerja Cargo Oil Pump untuk Mendukung Kelancaran Proses Bongkar Muatan di MT. Pangrango

Angelina Adria S. P; Amad Narto; Moh.Sapta Heriyawan

doi:10.61132/globe.v3i3.1006

Authors

Angelina Adria S. P Politeknik Ilmu Pelayaran Semarang
Amad Narto Politeknik Ilmu Pelayaran Semarang
Moh.Sapta Heriyawan Politeknik Ilmu Pelayaran Semarang

DOI:

https://doi.org/10.61132/globe.v3i3.1006

Keywords:

Bearing , Cargo oil pump, Loading, Shaft, Unloading operation

Abstract

The Cargo oil pump is one of the auxiliary units on board a ship, used to transfer cargo from one location to another during loading and unloading operations. On the MT Pangrango vessel, an issue occurred with the cargo oil pump: its performance declined, resulting in slow suction during the unloading process. This problem hindered efficient cargo operations, as the pump was not functioning properly.This study aims to identify the contributing factors, impacts, and countermeasures for the decreased performance of the cargo oil pump. The research methodology applied in this thesis involved a descriptive approach combined with Miles and Huberman’s analytical method, with data validity tested via triangulation. Data collection techniques used to identify the problem included observation, interviews, documentation, and literature review.The results revealed that the pump’s shaft was worn due to excessive friction, and the ball bearing s exhibited wear and disintegration caused by lack of lubrication (grease). The recommended corrective actions were to add material to the shaft , perform realignment to correct any shaft misalignment, and implement routine maintenance—specifically, monthly grease lubrication. These measures, when properly applied, can significantly reduce the risk of Cargo oil pump damage.

References

Aji, W. P., & Darmana, E. (2021). Analisa penyebab rusaknya cargo oil pump guna menunjang discharge cargo Pertamax di atas kapal MT. Patra Tanker 2. Jurnal Sains dan Teknologi Maritim, 22(1), 31. https://doi.org/10.33556/jstm.v22i1.269

Darmana, E., & Supriyadi, A. (2021). Analisa terhambatnya proses discharge pada cargo pump di kapal MT. Karmila. Marine Science and Technology Journal, 1(2), 84–90.

Dimas, A. S. (2020). Analisa penurunan kerja cargo oil pump turbine di MT. Gede. http://repository.pip-semarang.ac.id/id/eprint/2584

Fakhruddin, A. (2020). Analisa penyebab kerusakan pada impeller pompa sentrifugal dengan menggunakan metode Failure Mode Effects Analysis (FMEA) di PT. Meskom Agro Sarimas. Transmisi, 16(2), 94–100. https://doi.org/10.26905/jtmt.v16i2.4888

Ghofur, A. A. (2023). Identifikasi penyebab kerusakan mechanical seal pada cargo oil pump di MT. Krasak. http://repository.pip-semarang.ac.id/id/eprint/2559

Gigih Pradana, A., Zakk, A. F., Mulyatno, P., & Firdaus, A. (2022). Analisa respon struktur kapal oil tanker 6500 DWT akibat beban tekuk, geser dan puntir. Jurnal Teknik Perkapalan, 10(4), 11–21. https://ejournal3.undip.ac.id/index.php/naval

Hanyfah, S., Fernandes, G. R., & Budiarso, I. (2022). Penerapan metode kualitatif deskriptif untuk aplikasi pengolahan data pelanggan pada car wash. Semnas Ristek (Seminar Nasional Riset dan Inovasi Teknologi), 6(1), 339–344. https://doi.org/10.30998/semnasristek.v6i1.5697

Khaeroman, K., Herdawan, D., & Zaghlul Nafis, R. (2023). Case study: Pengaruh keretakan shaft kopling pompa kargo terhadap kinerja pompa kargo di SPOB Sea World One. Jurnal Maritim Polimarin, 9(2), 77–82. https://doi.org/10.52492/jmp.v9i2.106

Kurniawan, A. (2019). Tipe semi open. Otopro, 15(1), 20–26. https://journal.unesa.ac.id/index.php/jo

Ndori, A., Susanto, S., & Achriyan, D. A. (2022). Analisa penyebab penurunan kinerja cargo oil pump dan seat ring valve terhadap kelancaran discharge cargo di kapal tanker. Jurnal Maritim Polimarin, 8(1), 96–101. https://doi.org/10.52492/jmp.v8i1.54

Nugraha, I. A. (2023). Analisis terhambatnya proses bongkar muat di MT. Raina [Skripsi, tidak diterbitkan].

Permana, G., Hanifi, R., & K. (2021). Analisa perhitungan dan performa pompa sentrifugal item A124J pada unit amonia PT XY. Al-Jazari: Jurnal Ilmiah Teknik Mesin, 6(2), 64–68. https://doi.org/10.31602/al-jazari.v6i2.6051

Putra, A. P. (2021). Optimalisasi penggunaan cargo pump untuk menggantikan stripping pump saat bongkar muatan di kapal MT. Sei Pakning. http://repository.pip-semarang.ac.id/3083/

Qomaruddin, Q., & Sa’diyah, H. (2024). Kajian teoritis tentang teknik analisis data dalam penelitian kualitatif: Perspektif Spradley, Miles dan Huberman. Journal of Management, Accounting, and Administration, 1(2), 77–84. https://doi.org/10.52620/jomaa.v1i2.93

Rusmiyanto, D., & Dessixson, W. T. (2022). Analisis faktor-faktor yang mempengaruhi produktivitas bongkar muat peti kemas di Pelabuhan Tanjung Emas Semarang. Jurnal Universal Technic, 1(1), 67–86.

Said, J., & Dahlan, D. (2023). Analisis kinerja pompa sentrifugal dengan perlakuan resurfacing. Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, 13(3), 170–179. https://doi.org/10.35814/teknobiz.v13i3.5753

Siregar, P. I., Habli, M. H., Hidayat, A., & Fahri, A. M. (2021). Meningkatkan perawatan cargo oil pump turbine untuk kelancaran kegiatan bongkar muatan di MT. SC Warrior L. Meteor STIP Marunda, 14(1), 58–68. https://doi.org/10.36101/msm.v14i1.181

Sofwatillah, Risnita, Jailani, M. S., & Saksitha, D. A. (2024). Teknik analisis data kuantitatif dan kualitatif dalam penelitian ilmiah. Journal Genta Mulia, 15(2), 79–91.

Sugiyono. (2019). Metode penelitian kuantitatif kualitatif dan R&D (Sutopo, Ed.; 1st ed.). ALFABETA.

Yani, A. (2022). Analisis karakteristik pompa air tipe sentrifugal kapasitas 34 liter/menit dengan daya pompa 125 watt. Jurnal Sains Terapan, 5(1), 1–7.