Analisis Risiko Keselamatan Kerja dan Kesehatan Lingkungan Akibat Proses Pengecatan Pesawat di Hangar PT. XYZ

Aziz Fauzan Allaam; Yogi Prisma Caysar Pradewa

doi:10.61132/globe.v3i2.829

Authors

Aziz Fauzan Allaam Politeknik Penerbangan Indonesia Curug
Yogi Prisma Caysar Pradewa Politeknik Penerbangan Indonesia Curug

DOI:

https://doi.org/10.61132/globe.v3i2.829

Keywords:

Aircraft, Environment, Health, Risk, Safety

Abstract

The study aims to analyze the occupational safety and environmental health risks due to aircraft painting at the Hangar of PT. XYZ. The study is a descriptive study with a qualitative approach. The results of the study are the analysis of occupational safety risks seen from occupational safety risks and risk control. Occupational safety risks in aircraft painting activities at PT. XYZ are divided into several parts, namely (1) Exposure to hazardous chemicals is included in the high category; (2) The risk of work accidents is included in the moderate category; (3) Equipment damage is included in the low category; and (4) Fire is included in the low category. Risk control can be carried out by (1) Increasing strict supervision of the aircraft painting process; (2) Conducting appropriate occupational safety training for workers; (3) Using PPE; (4) Using adequate safety equipment; and (5) Carrying out proper equipment maintenance. The analysis of environmental health risks is seen from environmental health risks, sources of risk and risk control. Environmental health risks are divided into several parts, namely (1) Air pollution is included in the moderate category; (2) Soil and water contamination is included in the moderate category; and (3) Environmental damage is included in the moderate category. Sources of environmental health risks are the use of hazardous chemicals and painting waste. Risk control can be done by carrying out strict supervision, using safe chemicals and proper waste management.

References

A.D.P. Citra, Purwanto, P., & H.R.S. (2020). Pengelolaan limbah cat pada industri kemasan plastik kecantikan dengan pendekatan teknologi dan life cycle assessment (LCA). School of Postgraduate.

Amin, A., Rahmat, A., & Ranti, P. (2022). Pengaruh job insecurity terhadap kinerja karyawan dengan kepuasan kerja sebagai variabel intervening. Technomedia Journal, 178.

Brown, M. (2019). Polusi udara dan kesehatan lingkungan. Yogyakarta: UGM.

Eni Mahawati, Q., Fitriyatinur, C., Apriza Yanti, C., Puji Rahayu, P., Aprilliani, C., Chaerul, M., Hartini, E., Sari, M., Marzuki, I., Sitorus, E., Jamaludin, A. S. (2021). Keselamatan kerja dan kesehatan lingkungan industri. Semarang: Penerbit Yayasan Kita Menulis.

Environmental Protection Agency (EPA). (2024). Soil contamination. https://www.epa.gov

Jofan Delfi Piliang, Sanusi, & Larisang, E. S. (2025). Analisis penyebab kegagalan proses full body painting pesawat terbang menggunakan metode failure mode and effect analysis (FMEA). Jurnal Rekayasa Industri (JRI), 7(1), 50–60.

Johnson, S. (2020). Kerusakan lingkungan dan dampaknya bagi ekosistem. Bandung: ITB.

Lazuardi, M. R., Sukwika, T., & Kholil, K. (2022). Analisis manajemen risiko keselamatan dan kesehatan kerja menggunakan metode HIRADC pada departemen assembly listrik. Journal of Applied Management Research, 2(1), 11–20. https://doi.org/10.36441/jamr.v2i1.811

Lee, S. (2022). Advances aircraft coatings. Singapore: Springer.

Li, J., Zhang, Y., & Wang, X. (2023). Advances coating technologies for aircraft protection. Journal of Aerospace Engineering, 36(2), 1–10.

Maulana, M. I., & A.D. (2023). Analisis manajemen risiko penerbangan di Bandar Udara Sultan Muhammad Salahuddin Bima berbasis ISO 31000. Jurnal Mahasiswa, 5(4), 116–123.

Muhammad Aji Suradi, & R.F.H. (2022). Analisis keselamatan dan kesehatan kerja pada petugas apron di Unit Penyelenggara Bandar Udara Tunggul Wulung Cilacap. Jurnal Kewarganegaraan, 6(1), 1882–1889.

Muldian Sari. (2025). Analisis penerapan bauran instrumen kebijakan lingkungan dalam penurunan emisi karbon sektor penerbangan. Jurnal Darma Agung, 33(1).

Mulyadi Nur, Hendri Louis, & Latif, W. (2023). Pengembangan media timer pencampuran painting pesawat berbasis mikrokontroler Promini di Hanggar Poltekbang Makassar. Jurnal Media Elektrik, 20(3), 29–36.

Nugraha, Y. S. (2022). Analisis lingkungan kerja terhadap keselamatan dan kesehatan kerja (K3) di PT. Gapura Angkasa Bandar Udara Internasional Ahmad Yani Semarang. Jurnal Kewarganegaraan, 6(1), 1267–1276.

Pramudita Budiutomo, Dewa Putu Arcelino Anggrean, & D.W. (2024). Pengaruh kesehatan dan keselamatan kerja (K3) terhadap kinerja personil PKP-PK di bandar udara. Jurnal Ilmiah Multidisiplin, 1(6), 64–70.

Relations, L. A. P. (2024). Seni pengecatan pada bodi pesawat: Keunggulan dan keunikan livery di Batam Aero Technic.

Sinaga, N. A. (2022). Aspek hukum keselamatan penerbangan di Indonesia. Jurnal Hukum Sasana, 8(2), 453–462.

Smith, J. (2020). The aviation industry: Challenges and opportunities. London: Routledge.

Sutarwati, S., Ri. M., & S. (2024). Pengaruh keselamatan dan kesehatan kerja terhadap kinerja karyawan unit airside PT Angkasa Pura II Bandar Udara Internasional Husein Sastranegara Bandung. HEMAT Journal of Humanities Education Management Accounting and Transportation, 1(2), 156–169.

United Nations Environment Programme (UNEP). (2022). Air pollution: A global assessment of exposure and burden of disease.

World Health Organization (WHO). (2024). Water pollution.

Y. N. Nurhayati, Kusumawati, D. K. K., & Yuliawati, Y. Y. (2020). Percepatan implementasi kerjasama pemerintah dengan badan usaha untuk pengembangan infrastruktur bandar udara di Indonesia. Warta Ardhia, 46(1), 26–38.