Analisis Risiko Kesehatan Dan Keselamatan Kerja Pada Area Proses  PT. XYZ Menggunakan Metode HIRARC

Ajeng Afriza; Sinta Dewi

doi:10.61132/jupiter.v2i1.54

Authors

Ajeng Afriza Universitas Pembangunan Nasional Veteran Jawa Timur
Sinta Dewi Universitas Pembangunan Nasional Veteran Jawa Timur

DOI:

https://doi.org/10.61132/jupiter.v2i1.54

Keywords:

HIRARC, K3, SMK3

Abstract

PT. XYZ is an organization that manufactures wood products, including tables, chairs, and other domestic items. Workplace accidents are an extremely probable occurrence at PT. XYZ. Consequently, risk management is essential for reducing the occurrence of workplace accidents. The process of identifying suitable control measures is simplified through the utilization of the HIRARC method. The investigation was conducted in the grinding, sanding, lathe, drill, and corridor areas of the PT. XYZ process area. According to the findings derived from the conducted research, the hazard identification procedure yielded twenty-four indicators of peril. After calculating the 24 hazard indications, the risk level associated with the indicated hazards is determined. One is classified as extremely high risk, thirteen as high risk, eight as medium risk, and two as low risk. And company management can control hazards through the provision of safety signs, utilization of appropriate PPE, and establishment of work areas.

References

Afredo, L. W., & Tarigan, U. P. P. B. (2021). Analisis Risiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control). Jurnal Ilmiah Teknik Industri Prima (JURITI PRIMA), 4(2). https://doi.org/10.34012/juritiprima.v4i2.1816

Aprilliani, C., Fatma, F., Syaputi, D., Manalu, S. M. H., Sulistiyani, Handoko, L., Tanjung, R., Asrori, M. roy, Simangunsong, D. E., Kumala, C. M., Romas, A. N., Lamria Situmeang, Firdaus, & ISBN. (2022). Keselamatan Dan Kesehatan Kerja ( K3 ) PT Global Eksekutif (Issue March). PT. GLOBAL EKSEKUTIF TEKNOLOGI. http://www.globaleksekutifteknologi.co.id/

Asih, T. N., Mahbubah, N. A., & Fathoni, M. Z. (2021). Identifikasi Bahaya Dan Penilaian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Fabrikasi Dengan Menggunakan Metode Hirarc (Studi Kasus : Pt. Ravana Jaya). JUSTI (Jurnal Sistem Dan Teknik Industri), 1(2), 272. https://doi.org/10.30587/justicb.v1i2.2609

Choiriyah, S., Harianto, F., & Henggar, D. (2020). Analisis Tingkat Implmentasi Smk3 Pada Konstruksi Bangunan Di Surabaya Berdasarkan Pp No 50 Tahun 2012. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 9(1), 73–79. https://doi.org/10.22225/pd.9.1.1675.73-79

Mawengkang, H., Sutarman, & Husain. (2019). Analisis Keputusan Menggunakan Pendekatan Model Causal Loop Diagram (CLD) Model Dinamik untuk Perencanaan Wisata Syariah Berkelanjutan. Jurnal Mantik, 3(2), 10–19. http://iocscience.org/ejournal/index.php/mantik/article/view/882/595

Monoarfa, V., & Miolo, R. N. B. (2022). Penerapan Keselamatan dan Kesehatan Kerja ( K3 ) Menggunakan Metode HIRARC Pada UMKM Pabrik Tahu. Jurnal Pengabdian Ekonomi, 02(01), 1–6.

Noviyanti, A. (2020). Penerapan Hazard Identification Risk Assessment and Risk Control pada Area Proses Produksi. Journal Higeia, 4(Special 1), 136–146.

Nur, M. (2021). Analisis Tingkat Risiko Kesehatan Dan Keselamatan Kerja (K3) Dengan Menggunakan Metode Hirarc Di Pt. Xyz. Jurnal Teknik Industri Terintegrasi, 4(1), 15–20. https://doi.org/10.31004/jutin.v4i1.1937

Oshin, R., Bunga’, A., & Sutapa, N. (2018). Perancangan Analisis Risiko untuk Memenuhi ISO 45001:2018 Klausul 6 di Universitas X. Perancangan Analisis Risiko Untuk Memenuhi ISO, 45001(2), 449–456.

Ramadhan, F. (2017). Analisis Kesehatan dan Keselamatan Kerja (K3) menggunakan metode Hazard Identification Risk Assessment and Risk Control (HIRARC). Seminar Nasional Riset Terapan, November, 164–169.

Wijaya, A., Panjaitan, T. W. S., & Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia/ Jurnal Titra, 3(1), 29–34.