Rancang Bangun Alat Pemotong Kerupuk Terasi dengan Menggunakan Senar Gitar

Muhammad Zainudin; Jaelani Jaelani; Fitri Nur Fauziah

doi:10.61132/jupiter.v3i2.792

Authors

Muhammad Zainudin Universitas Muhammadiyah Tegal
Jaelani Jaelani Universitas Muhammadiyah Tegal
Fitri Nur Fauziah Universitas Muhammadiyah Tegal

DOI:

https://doi.org/10.61132/jupiter.v3i2.792

Keywords:

Crackers, Cracker cutters, Guitar strings

Abstract

Crackers are a typical Indonesian food that is very popular with various groups because of its crunchy texture and distinctive savory taste. One type of cracker that is often found is shrimp paste crackers, which are made from flour with the addition of shrimp paste, spices, and raising agents. In the production process, sophisticated technology is needed to increase production efficiency so that it can save energy, time, and costs. However, production equipment produced by factories is often expensive and difficult for the public to reach. Therefore, appropriate technology has emerged that is designed to help the community, one of which is a manual cracker cutter. This tool is designed to speed up and simplify the process of cutting crackers with uniform cutting results, namely 2-5 mm thick. Based on the trial, the cracker cutter using guitar strings showed significant time efficiency compared to a kitchen knife. The total cutting time with a kitchen knife reached 6 minutes 88 seconds, while using a cutter only took 42 seconds, with a time difference of 6 minutes 18 seconds. These results show that a manual cracker cutter based on guitar strings can increase efficiency and productivity in the cracker production process.

References

Hidayat, D. P., & Tamjidillah, M. (2022). Perancangan & pembuatan alat pemotong kerupuk otomatis dengan kapasitas 60 kg per jam. Jurnal Tugas Akhir Mahasiswa Rotary. Universitas Lambung Mangkurat Banjarbaru.

Hiola, E., Antu, E. S., & Djamalu, Y. (2016). Rancang bangun alat pemotong lontong kerupuk menggunakan tali senar. Jurnal Teknologi Pertanian Gorontalo (JTPG), 1(1), Mei 2016.

Fibrianie, E., et al. (2018). Rancang bangun mesin penggiling dan potong kerupuk ikan dengan menggunakan gearbox. Jurnal Riset Teknologi Industri. Politeknik Negeri Samarinda.

Faujiyah. (2020). Perancangan dan pembuatan pemotong kerupuk otomatis dengan kapasitas 60 kg per jam. Jurnal Akhir Mahasiswa ROTARY, 4(2), 2022.

Gunawan, et al. (2021). Bab II tinjauan pustaka 2.1 rancang bangun. Universitas Bandar Lampung.

Huda. (2020). Modifikasi alat pemotong kerupuk. Fakultas Teknik, Universitas Tridinanti Palembang.

Kusumaningrum, et al. (2016). Implementasi teknologi pengolah kerupuk untuk meningkatkan kapasitas produksi UD. Sumber Rejeki. E-DIMAS Jurnal Pengabdian Kepada Masyarakat, 14(4), 816-822.

Lutfiani, et al. (2021). Bab II tinjauan pustaka 2.1 rancang bangun. Universitas Bandar Lampung.

Ruenda, O. (2020). Karakteristik fisik, kimia, dan organoleptik kerupuk terasi. Universitas Katolik Soegijapranata, Semarang.

Pratama, Y., & Setiawan, D. (2019). Desain alat pemotong kerupuk manual berbahan kayu. Jurnal Teknologi Tepat Guna Indonesia.

Rahmat, Y., & Permana, B. (2018). Efisiensi energi pada motor listrik untuk mesin pemotong kerupuk otomatis. Prosiding Seminar Nasional Teknik Elektro.

Oktaviani, S., & Mauluddin, Y. (2021). Perancangan alat bantu pemotong kerupuk untuk meningkatkan kapasitas produksi UMKM Samawi. Jurnal Kalibrasi. Institut Teknologi Garut.

Sugiyono. (2014). Metode penelitian kualitatif, kuantitatif, dan R&D. Alfabeta.

Wahyono, R., & Marzuki. (2010). Inovasi pembuatan kerupuk bawang dengan substitusi tepung kentang. Fakultas Teknik, Universitas Negeri Semarang.

Lestari, W. D., et al. (2023). Implementasi teknologi pengolah kerupuk untuk meningkatkan kapasitas produksi UD. Sumber Rejeki. E-DIMAS Jurnal Pengabdian Kepada Masyarakat, 14(4), 816-822.