Pergaruh Rendaman Pada Marshall Campuran AC-BC Limbah Ban Karet Bekas Sebagai Agregat Pengganti

Authors

  • Muhammad Ady Mulyadi Universitas Muhammadiyah Parepare
  • Jasman Jasman Universitas Muhammadiyah Parepare
  • Mustakim Mustakim Universitas Muhammadiyah Parepare

DOI:

https://doi.org/10.61132/konstruksi.v2i3.390

Keywords:

Immersion Impact, Waste rubber tyres, Marshall Qountient

Abstract

Utilization of new technologies in asphalt mixture production includes soaking technologies that can enhance mechanical properties of the mixture. This research aims to evaluate pavement vulnerability to water and the environmental quality impact due to waste from used rubber tires as an effort to strengthen pavements by substituting asphalt. The variables studied are variations of used rubber tire waste at 0%, 2%, 3%, and 4% replacing asphalt content in AC-BC mixtures. Testing was conducted using the Marshall method by soaking the mixtures in water for normal duration, 30 minutes, 24 hours, and 72 hours. The test results indicate that higher percentages of used rubber tire waste and longer soaking durations lead to a decrease in AC-BC mixture characteristics. The Marshall value of the AC-BC mixture with 2% used rubber tire waste was found to be superior compared to mixtures with 0%, 3%, and 4%. From the data analysis conducted, it can be concluded that water has a negative influence on the Marshall value reduction of mixtures containing used rubber tire waste, correlating with increased soaking duration.

References

Annisa, N. T., & Latif, B. S. (2017). Pengaruh rendaman pada indirect tensile strength campuran AC-BC dengan limbah plastik sebagai agregat pengganti. Media Komunikasi Teknik Sipil, 23(2), 166-173.

Arifin, M., & Tugiman. (2022). Analisis pengaruh waktu rendaman perkerasan AC-BC terhadap stabilitas dan kelelehan (Flow) aspal. Statika, 8, 1.

Cut, K. D., Sofyan, M., & dkk. (2019). Uji Marshall pada campuran Asphalt Concrete Binder Course (AC-BC) dengan tambahan parutan ban bekas. Teknik Sipil Universitas Syiah Kuala, 1(Special), 559-570.

Dina, F., Sofyan, M. S., & dkk. (2019). Karakteristik penggunaan parutan ban dalam bekas kendaraan roda 4 terhadap campuran AC-BC. Journal of The Civil Engineering Student, 1(1), 1-7.

Halimu, O., Fitriah, & Sulha. (2018). Uji karakteristik Marshall campuran Laston AC-BC menggunakan material batu kapur dan variasi aspal Kabungka dengan kadar aspal. Stabilita, 6, 3.

Izazi, A. K. d. M. A. (2019). Pengaruh genangan air hujan terhadap kinerja campuran aspal concrete - wearing course (AC - WC). Syntax Literate: Jurnal Ilmiah Indonesia, 4, 7.

Khadafi, M., Jasman, & dkk. (2023). Studi penggunaan plastik HDPE pada campuran aspal sebagai bahan pengikat konstruksi jalan. Karajata Engineering, 3, 102.

Rahmawati, A. N., & Widhiastuti, Y. (2023). Pengaruh penambahan serbuk limbah ban bekas kendaraan terhadap karakteristik Laston AC-BC dengan metode uji Marshall. Jurnal Pendidikan Tambusai, VII, 3974-3993.

Weimontoro, Farid, A., & dkk. (2022). Pengaruh penambahan limbah karet ban sebagai substitusi sebagian kadar aspal terhadap stabilitas AC-BC dengan metode Marshall test. Rekayasa Jurnal Teknik Sipil Universitas Madura, 7, 25.

Widianty, D., Yuniarti, R., & dkk. (2019). Analisis karakteristik Marshall pada beton aspal lapis pengikat (Asphalt Concrete-Binder Course) mengunakan modifikasi serbut serat batang pelapah pisang. Sains Teknologi & Lingkungan, 6(1), 85-95.

Published

2024-06-22

How to Cite

Muhammad Ady Mulyadi, Jasman Jasman, & Mustakim Mustakim. (2024). Pergaruh Rendaman Pada Marshall Campuran AC-BC Limbah Ban Karet Bekas Sebagai Agregat Pengganti. Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang Dan Teknik Sipil, 2(3), 146–158. https://doi.org/10.61132/konstruksi.v2i3.390

Similar Articles

<< < 1 2 3 > >> 

You may also start an advanced similarity search for this article.