Monitoring Kinerja Heat Exchanger pada Sistem Sea Water & Cooling Water

Marwan Marwan; Mad Yusup; Ida Rosanti

doi:10.61132/konstruksi.v3i3.964

Authors

Marwan Marwan Universitas Nahdlatul Ulama Kalimantan Timur
Mad Yusup Universitas Nahdlatul Ulama Kalimantan Timur
Ida Rosanti Universitas Nahdlatul Ulama Kalimantan Timur

DOI:

https://doi.org/10.61132/konstruksi.v3i3.964

Keywords:

Plate and Frame Heat Exchanger (PFHE), Heat Transfer Efficiency, Cooling Water System, Performance Evaluation, Observation and Interview Methods

Abstract

One type of efficient and widely used heat exchanger is the Plate and Frame Heat Exchanger (PFHE). PFHE is a device designed to increase the efficiency of heat exchange through a structure of plates assembled together. This design allows a large heat exchange surface area in a relatively small space, creating an efficient environment for heat transfer. This study took the Plate and Frame type Heat Exchanger object, while the purpose of this study was to determine the performance of the Heat Exchanger in the Sea water & Cooling Water system at PT. Eni. The research methods used were the Observation method, Interview method (Question and Answer), and Literature review. The results of the study showed that the performance of the Heat Exchanger in the Sea water & Cooling Water system at PT. Eni runs according to the desired design. The operating temperature line remains below the maximum limit set, and indicates the performance of the heat exchanger in very good condition. This reflects the optimal heat exchange results in Cooling Water. In accordance with the design operating parameters, the achievement of heat exchange in the minimum range of 4 - 5 ℃ and the maximum limit of redistribution temperature in Cooling Water does not exceed 45 ℃, which indicates that this system operates according to the desired standards

References

Anonim. (2017, April). Basic design description topside sea water and cooling water system Jakarta: PT “X” di Selat Makassar.

Eni. (2024, Desember 28). Eni. Wikipedia. https://id.wikipedia.org/wiki/Eni

Eni. (2024, Desember 28). Indonesia. Eni. https://www.eni.com/en-IT/actions/global-activities/indonesia.html

Hadipriyana. (2024, Desember 26). Data komponen heat exchanger tipe plat. Politeknik Negeri Bandung. https://digilib.polban.ac.id/files/disk1/228/jbptppolban-gdl-hadipriyan-11377-3-bab2--9.pdf

My Villages Baros. (2024, Desember 26). Data tentang heat exchanger tipe plat. https://myvillagesbaros.blogspot.com/2017/07/plate-and-frame-heat-exchanger-uht.html

Nolan, D. P. (2011). Fire and explosion protection engineering principles. Elsevier.

Pratama, R. H. (2009). Risk assessment tanker LNG dalam studi kasus supply LNG dari ladang Tangguh ke Teluk Benoa Bali [Skripsi, Institut Teknologi Sepuluh Nopember].

Shah, K. J., & Sekulic, D. P. (2003). Fundamentals of heat exchanger design (1st ed.). Wiley.

Soegiono, K. B. A. (2013). Transportasi LNG Indonesia. Airlangga University Press.

Standard, B. (2001). Hazard and operability studies (HAZOP studies): Application guide. International Electrotechnical Commission.

Sudiasih, L. (2018). Fire risk assessment for conceptual design of FSRU Jayapura [Skripsi, Institut Teknologi Sepuluh Nopember].

Thulukkanam, K. (2013). Heat exchanger design handbook (2nd ed.). CRC Press.

Tin, H. T. (2014). Application of quantitative risk assessment approach on offshore oil & gas industry [Tesis, Ho Chi Minh City University of Technology].

Wang, L., Sundén, B., & Manglik, R. M. (2007). Plate heat exchangers: Design, applications and performance (1st ed.). WIT Press.

Wikipedia. (2024, Desember 25). Penukar panas. https://id.wikipedia.org/wiki/Penukar_panas