Penerapan ISO 45001:2018 terhadap Peningkatan Produktivitas

Anang Novida Harinurdin; Yunita Primasanti; Erna Indriastiningsih

doi:10.61132/manufaktur.v3i1.775

Authors

Anang Novida Harinurdin Universitas Sahid Surakarta
Yunita Primasanti Universitas Sahid Surakarta
Erna Indriastiningsih Universitas Sahid Surakarta

DOI:

https://doi.org/10.61132/manufaktur.v3i1.775

Keywords:

Gap Analysis, Increased Productivity, ISO 45001:2018, Reliability Test, Validity Test

Abstract

According to data from the International Labor Organization (ILO), every year there are more than 2.78 million deaths and 378 million injuries due to work accidents or occupational diseases. At PT. XXX, since the site opened in 2014, there have been 16 accident cases, while in 2021 there were 9 cases recorded. OB removal production in 2014 reached 4,105,279 tons, and in 2021 it will increase to 16,942,212 tons. This research aims to analyze the relationship between implementing ISO 45001:2018 and efforts to increase productivity. The research instrument was a questionnaire with a sample of 30 people and an ISO 45001:2018 audit checklist to carry out gap analysis. The validity test using Bivariate Pearson correlation showed good validity (r > 0.5, p < 0.01), and the reliability test showed very high internal consistency with a Cronbach's Alpha value of 0.993. The gap analysis results show that most of the standard clauses have been implemented well (value > 3.00), such as leadership and commitment (3.77), participation and consultation (3.83), and hazard identification (3.25). However, determining the scope of the system needs improvement (value 2.80). The total gap analysis score reached 84%, which shows good implementation. Optimal implementation of ISO 45001:2018 has been proven to reduce accidents and injuries, which contributes to increasing productivity at PT. XXX.

References

Arikunto, S. (2012). Prosedur penelitian: Suatu pendekatan praktik. Rineka Cipta.

Cahyana, U. (2015). Metodologi penelitian pendidikan. PT. Raja Grafindo Persada.

Cholid. (2010). Metodologi penelitian. PT. Bumi Aksara.

Gemely, D. (2019). Implementasi sistem manajemen keselamatan dan terminal petikemas Makassar tahun 2018. Jurnal PASCA UNHAS, 3(1), 60–66.

Hardjono, W. (2020). Solusi receh tingkatkan produktivitas tanpa batas (Pertama). PT. Aksespro Konsultindo Abyudaya.

Haryanti, N. (2020). Metodologi penelitian pendidikan kuantitatif, kualitatif, mixed method, dan research and development (Pertama). Madani Media.

Huberman, A. M. (1992). Qualitative data analysis (Edisi Bahasa Indonesia). UII Press.

Hutapea, B. T., Iso, A. I., & Sistem, T. K. (2021). Analisis implementasi ISO 45001 2018 terhadap SMK3 PT Techindo Contromatra.

ISO. (2018). International standard ISO 45001:2018 occupational health and safety management systems: Requirements with guidance for use (1–51).

Masjuli, Taufani, A., & Kasim, A. A. (1996). Sistem manajemen keselamatan dan kesehatan kerja. In Permenaker Nomor 5 (Vol. 2, Issue 2).

Matthew, B. M. (1992). Qualitative data analysis (Edisi Bahasa Indonesia). UII Press.

Moleong, L. J. (2006). Metodologi penelitian kualitatif. Remaja Rosdakarya.

Moleong, L. J. (2017). Metodologi penelitian kualitatif (Revisi). PT. Remaja Rosdakarya.

Muhadjir, N. (2002). Metodologi penelitian kualitatif (1st ed.). Raka Sarasih.

Nasution. (2012). Metode research. PT. Bumi Aksara.

Sedarmayanti. (2009). Sumber daya manusia dan produktivitas kerja. Mandar Maju.

Sugiyono. (2006). Metode penelitian administrasi dilengkapi dengan metode R & D. Alfabeta.

Sugiyono. (2012). Memahami penelitian kualitatif. Alfabeta.

Sugiyono. (2016). Metode penelitian kuantitatif, kualitatif dan R&D. Alfabeta.

Suma’mur. (2013). Higiene perusahaan dan kesehatan kerja (Hiperkes). CV. Sagung Seto.

Syahrullah, Y., & Febriani, A. (2019). Evaluasi standar manajemen kesehatan dan keselamatan kerja ISO 45001:2018 untuk mencegah terjadinya kecelakaan kerja akibat kegagalan proyek infrastruktur. Prosiding SNATIF Ke-6 Tahun 2019, November, 96–101.

Tarwaka. (2017). Keselamatan dan kesehatan kerja: Manajemen dan implementasi K3 di tempat kerja. Harapan Press.

Zaenul Fitri, A. (2020). Metodologi penelitian pendidikan kuantitatif, kualitatif, mixed method, dan research and development (Pertama). Madani Media.