Rancang Bangun Panel Instalasi Listrik dengan Prinsip Engineering Safety Ruang Spray Booth Pengecatan Bodi Kendaraan

Aldi Zulkarnain Hasibuan; Donny Fernandez; Andrizal Andrizal; Nuzul Hidayat

doi:10.61132/venus.v3i6.1265

Authors

Aldi Zulkarnain Hasibuan Universitas Negeri Padang
Donny Fernandez Universitas Negeri Padang
Andrizal Andrizal Universitas Negeri Padang
Nuzul Hidayat Universitas Negeri Padang

DOI:

https://doi.org/10.61132/venus.v3i6.1265

Keywords:

Automotive, Electrical Panel, Engineering Safety, Occupational Safety, Water Spray Booth

Abstract

This study aims to design and develop an electrical installation panel by applying engineering safety principles in the water spray booth of a vehicle body painting system. Field observations indicate that electrical panels in painting rooms often do not meet safety standards, which can lead to short circuits and potential fire hazards. The research employed a Research and Development (R&D) method using a simplified Borg and Gall model consisting of nine stages, starting from problem identification to effectiveness testing. Expert validation results obtained a score of 87.5% (highly valid), practicality testing yielded 90% (very practical), and effectiveness tests showed an average current of 4.1 A, with both the MCB and emergency stop functioning optimally. The developed panel product is declared feasible to be used as a practical learning media for automotive electrical systems. Based on the test results, the panel product was declared suitable for use and can be used as a learning medium in automotive electrical practice, helping to increase understanding of the application of safety in electrical installations in the automotive industry.

References

Ahmad Fiqkhi Dinnia. (2016). Teknologi Pengecatan Permahyd Water Base Sebagai Teknologi Ramah Lingkungan Pengganti Teknologi Pengecatan Solvent Base. 01, 1-23.

Badri, M. (2023). Rancang Bangun Tempat Pengecatan Body dan Part Sepeda Motor. https://doi.org/10.24036/jtpvi.v1i4.49

Casey, T. W., Mason, H. M., Huang, J., & Franklin, R. C. (2021). Shaping frontline practices: A scoping review of human factors implicated in electrical safety incidents. Safety, 7(4), 1-16. https://doi.org/10.3390/safety7040076 https://doi.org/10.3390/safety7040076

Djulihenanto, S., Saputra, M., Luthfi, S., & Nabiel, D. (2025). Implementasi Sistem Proteksi Arus dan Tegangan Lebih Pada PLTS. 12(1), 49-54. https://doi.org/10.33795/elposys.v12i1.6849

Handoko, R. (2022). Analisis Efisiesni Blower Mesin Pengering Padi dengan Daya Penggerak 1000 RPM dan 818 RPMdi CV Jasa Bhakti Karawang. Analisis Efisiesni Blower Mesin Pengering Padi Dengan Daya Penggerak 1000 RPM Dan 818 RPMdi CV Jasa Bhakti Karawang, 8(8), 1-8. https://doi.org/10.5281/zenodo.6618707

Irman, I., Latifah, L., Ruskardi, R., & Arief, M. S. (2022). Pemilihan Kabel Instalasi Listrik Untuk Bangunan Gedung Berdasarkan Kualitas Tahanan Isolasi. Jurnal ELIT, 3(1), 39-47. https://doi.org/10.31573/elit.v3i1.406 https://doi.org/10.31573/elit.v3i1.406

Kodir, A., Bahar, A., Aziz, A., & Hartanto, S. (2025). Analisis Instalasi Listrik Gedung Untuk Lantai Lobby PT Bimoli. 13(2), 87-93.

Kussoy, S. D., Prasetyo, J., & Widodo, S. (2024). Rancang Bangun Panel Listrik 3 Phase Untuk Kegiatan Praktikum Di Laboratorium Instalasi Listrik 10(2).

Okpatrioka Okpatrioka. (2023). Research And Development (R&D) Penelitian Yang Inovatif Dalam Pendidikan. Dharma Acariya Nusantara: Jurnal Pendidikan, Bahasa Dan Budaya, 1(1), 86-100. https://doi.org/10.47861/jdan.v1i1.154 https://doi.org/10.47861/jdan.v1i1.154

Perdian, H., Yusmartato, Y., & Nasution, R. (2022). Analisis Panel Kelistrikan Pabrik Kelapa Sawit Kapasitas 10 Ton/Jam di PT. SMS. JET (Journal of Electrical Technology), 7(3), 113-118. https://doi.org/10.30743/jet.v7i3.6305 https://doi.org/10.30743/jet.v7i3.6305

Permatasari, R. D., Bora, M. A., Wijaya, I. M. S., & Munir, Z. (2025). Meningkatkan Kesiapan Kerja Siswa SMK Melalui Pelatihan Ergonomi dan K3: Studi Kasus di SMKN 4 Batam. 14(2), 2042-2050. https://doi.org/10.22236/solma.v14i2.17394

Pinto, G. P. M., Setyanto, D., & Soewono, A. D. (2024). Instalasi Proteksi Kebakaran pada Gedung Laboratorium Menggunakan Detektor Panas dan Detektor Asap. G-Tech: Jurnal Teknologi Terapan, 8(3), 1343-1353. https://doi.org/10.33379/gtech.v8i3.4296 https://doi.org/10.33379/gtech.v8i3.4296

Sunarto, S., Santosa, Y., & Supriyanto, S. (2022). Analisis Perbandingan Sistem Proteksi Tegangan Sentuh Tidak Langsung Menggunakan ELCB dan MCB. JTERA (Jurnal Teknologi Rekayasa), 7(1), 83. https://doi.org/10.31544/jtera.v7.i1.2022.83-90 https://doi.org/10.31544/jtera.v7.i1.2022.83-90

Susilowati, E., & Lestari, F. (2022). KLASIFIKASI AREA BERBAHAYA PADA AREA TEMPAT PENYIMPANAN GAS HIDROGEN DI PT. XY HAZARDOUS AREA CLASSIFICATION FOR HYDROGEN GAS STORAGE AREA IN PT. XY. 7(1), 80-93. https://doi.org/10.21111/jihoh.v7i1.8555

Vio, K., Rusyatul, N., Rifadil, M. M., & Mahendra, L. S. (n.d.). EMITOR: Jurnal Teknik Elektro. Iml.

Waruwu, M. (2024). Metode Penelitian dan Pengembangan (R&D): Konsep, Jenis, Tahapan dan Kelebihan. Jurnal Ilmiah Profesi Pendidikan, 9(2), 1220-1230. https://doi.org/10.29303/jipp.v9i2.2141 https://doi.org/10.29303/jipp.v9i2.2141

Wijaya, I, K. (2020). Penggunaan Dan Pemilihan Pengaman Mini Circuit Breaker (Mcb). Teknologi Elektro, 6(2), 1-4. https://ojs.unud.ac.id/index.php/JTE/article/download/244/197/

Yored, M., Rufii, & Harwanto. (2022). Development of Constructivistic Economic Learning Tools with Advance Organizer. Jurnal Mantik, 6(3), 2841-2854. http://www.iocscience.org/ejournal/index.php/mantik/article/view/2949%0Ahttps://www.iocscience.org/ejournal/index.php/mantik/article/download/2949/2315