Analisis Karakteristik Karbon Aktif Hasil Pirolisis Kulitkopi Robusta sebagai Karbon Pendukung Katalis PEMFC (Proton Exchange Membrane Fuel Cell)

Muhammad Taufiqurahman; Pebi Riyanto; Rany Puspita D; Raka Mahendra S; Arif Rahman S; M. Fendy Kussuma H. S

doi:10.61132/venus.v4i1.1292

Authors

Muhammad Taufiqurahman Universitas Tidar
Pebi Riyanto Universitas Tidar
Rany Puspita D Universitas Tidar
Raka Mahendra S Universitas Tidar
Arif Rahman S Universitas Tidar
M. Fendy Kussuma H. S Universitas Tidar

DOI:

https://doi.org/10.61132/venus.v4i1.1292

Keywords:

Activated Carbon, Coffee Husk, Fuel Cell Catalyst, Proximate Analysis, Pyrolysis

Abstract

Proton Exchange Membrane Fuel Cells (PEMFCs) are increasingly developed due to their high efficiency, power density, durability, and environmental friendliness. However, the high cost of platinum catalysts limits their widespread application. Reducing platinum usage through the development of low-cost catalyst support materials is a promising approach. Activated carbon derived from biomass offers a sustainable and economical alternative, particularly when utilizing agricultural waste such as coffee husks, which are often discarded. This study aims to evaluate the characteristics of activated carbon produced from coffee husk waste through pyrolysis as a catalyst support for PEMFCs. Pyrolysis was conducted at 400 °C, followed by chemical activation using 1 M H₃PO₄ and 1 M KOH with a residence time of 90 minutes. The resulting activated carbon was analyzed through proximate analysis to determine moisture content, ash content, volatile matter, and fixed carbon content. The results showed that activation with 1 M H₃PO₄ produced the lowest moisture content (3.4%), the lowest ash content (3.8%), and the highest fixed carbon content (60.5%), while 1 M KOH yielded the lowest volatile matter content (27.7%). Based on these results, activated carbon produced using H₃PO₄ meets the requirements of SNI No. 01/6235/2000 and demonstrates strong potential as a catalyst support material for PEMFC applications.

References

Ermawati, E., Fernando, A., & Yani, J. A. (2018). Pengaruh jenis aktivator dan ukuran karbon aktif terhadap pembuatan adsorben dari serbuk gergaji kayu sengon (Paraserianthes falcataria). Jurnal Integrasi Proses, 7(2). http://jurnal.untirta.ac.id/index.php/jip

Gupta, C., Maheshwari, P. H., & Dhakate, S. R. (2016). Development of multiwalled carbon nanotubes–platinum nanocomposite as efficient PEM fuel cell catalyst. Materials for Renewable and Sustainable Energy, 5(1), 2. https://doi.org/10.1007/s40243-015-0066-5

Karuppanan, K. K., Panthalingal, M. K., & Biji, P. (2018). Nanoscale catalyst support materials for proton-exchange membrane fuel cells. In Handbook of nanomaterials for industrial applications (pp. 468–495). Elsevier. https://doi.org/10.1016/B978-0-12-813351-4.00027-4

Marsh, H., & Rodríguez-Reinoso, F. (2006). Activation processes (chemical). In Activated carbon (pp. 322–365). Elsevier. https://doi.org/10.1016/B978-008044463-5/50020-0

Marsh, H., & Rodríguez-Reinoso, F. (2006). Activation processes (thermal or physical). In Activated carbon (pp. 243–321). Elsevier. https://doi.org/10.1016/B978-008044463-5/50019-4

Mujizah, S. (2010). Pembuatan dan karakterisasi karbon aktif dari biji kelor (Moringa oleifera Lamk.) dengan NaCl sebagai bahan pengaktif (Skripsi sarjana). Universitas Islam Negeri Maulana Malik Ibrahim, Malang.

Novita, E., Wahyuningsih, S., Kamil, N. S., & Pradana, H. A. (2021). Model adsorpsi isoterm arang aktif kulit kopi pada penurunan warna air limbah pengolahan kopi. Agrin, 25(1), 22–35.

Oliveira, L. S., & Franca, A. S. (2014). An overview of the potential uses for coffee husks. In Coffee in health and disease prevention (pp. 283–291). Elsevier.

Pari, G., Tohir, D., Mahpudin, & Ferry, J. (2006). Arang aktif serbuk gergaji sebagai bahan adsorben pada pemurnian minyak goreng bekas. Jurnal Penelitian Hasil Hutan, 24(4), 309–322.

Pourrahmani, H., & Van Herle, J. (2022). Evaluation criterion of proton exchange membrane (ECPEM) fuel cells considering inserted porous media inside the gas flow channel. Applied Thermal Engineering, 203, 117952. https://doi.org/10.1016/j.applthermaleng.2021.117952

Pulidindi, I. (2016). Development and exploitation of carbon materials from plant sources (Doctoral dissertation). https://doi.org/10.13140/RG.2.1.2470.8240

Putra, T. A. R., Yunari, E. N., Pratama, B. S., Witoyo, J. E., Pangestu, M. B., Putra, E. P. D., Nugraha, A. W., & Devita, W. H. (2025). Characterization of activated carbon from coffee husk using potassium hydroxide (KOH) as an activator. Jurnal Keteknikan Pertanian Tropis dan Biosistem, 13(1), 1–9. https://doi.org/10.21776/ub.jkptb.2025.013.01.01

Rizki, R. G., Bahri, S., & Ginting, Z. (2022). Pembuatan karbon aktif dari kulit dalam biji kopi (endocarp) menggunakan aktivator KOH dan H₃PO₄. Jurnal Teknologi Kimia Unimal, 11(2).

Vanbruinessen, A. (2009). Development of Pt/CNT catalyst and transport kinetic characterization of PEMFC catalyst layer (Doctoral dissertation).

Yunus, R., Mikrianto, E., Abdurrahman, H., & Jaya, A. K. (2021). Prosiding Seminar Nasional Lingkungan Lahan Basah (Vol. 6).