Analisis Konsumsi Bahan Bakar Alat Gali Muat-Angkut pada Kegiatan Pengupasan Overburden PIT Seloklai
PT. Mitra Indah Lestari Kota Samarinda
DOI:
https://doi.org/10.61132/venus.v3i3.844Keywords:
Digger, Dump Truck, Fuel ConsumptionAbstract
Fuel consumption is a necessity in moving mechanical equipment, where fuel consumption is influenced by road conditions, horsepower, and load factors. PT. Mitra Indah Lestari uses Hyundai 480 and Sany750-H excavators. The transport equipment used is Wechai WT90, Tonly TLD90, and Quester CWE 330. This study uses a quantitative method and obtains fuel consumption results, where the fuel consumption of the Hyundai 480 and Sany 750-H excavators is 37.89 liters/hour and 59.91 liters/hour, respectively. The fuel consumption of the Wechai WT90, Tonly TLD90, and Quester CWE 330 transport equipment is 25.19 liters/hour; 27.53 liters/hour; and 10.66 liters/hour, respectively.
References
Amiruddin, M Faisal, Uyu Saismana, and Riswan Riswan. 2020. “Analisis Kegiatan Produktivitas Terhadap Fuel Ratio Alat Angkut Dan Alat Gali Muat Pada Pit 2 Di Pt Pro Sarana Cipta.” Jurnal Himasapta 5(2): 41. doi:10.20527/jhs.v5i2.2341.
Budi Setiyana. 2013. “Analisis Pengaruh Tekanan Dan Beban Pada Ban Tipe Radial Terhadap Rolling Resistance Kendaraan Penumpang.” Departemen Teknik Mesin Universitas Diponegoro 53(9): 1689–99. e-mail: bsetiyana@yahoo.com.
Frudis, Irwan Edel, Mardiah Mardiah, and Janiar Pitulima. 2020. “Kajian Teknis Alat Gali-Muat Dan Alat Angkut Pada Pencapaian Pengupasan Overburden 1.120.000 BCM Di Pit Taman Tambang Air Laya Bulan September 2016 PT Bukit Asam (Persero) Tbk.” Mineral 3(1): 66–73. doi:10.33019/mineral.v3i1.1578.
Gajanayake, S P, A G T Sugathapala, and J M S J Bandara. “Impact of Engine RPM on Fuel Consumption of Light Duty Vehicles.” (4): 4–8.
Indonesia, Keputusan Menteri Republik. 2018. “Keputusan Menteri Sumber Daya Energi DanMineral Republik Indonesia Nomor 1827 K/30/MEM.” Menteri Energi Sumberdaya Mineral Republik Indonesia.
Klanfar, Mario, Tomislav Korman, and Trpimir Kujundžić. 2016. “Potrošnja Goriva i Koeficijenti Opterećenja Pogonskih Motora Mehanizacije Pri Eksploataciji Tehničko-Građevnog Kamena.” Tehnicki Vjesnik 23(1): 163–69. doi:10.17559/TV-20141027115647.
Nam, Edward K. (EPA), and Robert (EPA) Giannelli. 2005. “Fuel Consumption Modeling of Conventional and Advanced Technology Vehicles in the Physical Emission Rate Estimator (PERE) - Draft.” 02.05.10_SistemasMotrizes (February): 124.
Oemiati, Nurnilam, Revisdah Revisdah, and Rahmawati Rahmawati. 2020. “Analisa Produktivitas Alat Gali Muat Dan Alat Angkut Pada Pengupasan Lapisan Tanah Penutup (Overburden).” Bearing : Jurnal Penelitian dan Kajian Teknik Sipil 6(3). doi:10.32502/jbearing.2842202063.
Prodjosumarto, Partanto. 1996. Pemindahan Tanah Mekanis. Bandung: Jurusan Teknik Pertambangan ITB.
Qinthara, Muhammad Rahthin, Masagus Ahmad Azizi, Emmy Fatmi Budhya, and Irfan Marwanza. 2022. “Pengaruh Efisiensi Kerja Terhadap Konsumsi Bahan Bakar Alat Gali Muat Dan Angku.” Indonesian Mining and Energy Journal 5(1): 24–32. doi:10.25105/imej.v5i1.13778.
Saleh, Rahmad, Uyu Saismana, and Eko Santoso. 2022. “Kajian Fuel Ratio Pada Alat Gali Muat Overburden Komatsu PC800 SE Dan Volvo EC700 Lc Study of Fuel Ratio on Overburden Excavating Equipment Komatsu PC800 SE and Volvo EC700 Lc.” Jurnal Himasapta 7(2): 107–10.
Setyawan, Ig Dodiet Aditya, S K M Ade Devriany, and Nuril Huda. 2021. Buku Ajar Statistika. Penerbit Adab.
Trani, Marco L, Benedetta Bossi, Marta Gangolells, and Miquel Casals. 2016. “Predicting Fuel Energy Consumption during Earthworks.” Journal of cleaner production 112: 3798–3809.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Venus: Jurnal Publikasi Rumpun Ilmu Teknik
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
