Evaluasi Performance Ban Micheline dan Brigstone Alat Angkut pada Pengangkutan Overburden dari Front Kerja Ke Disposal PT.Kaltim Diamond Coal Kabupaten Berau Kalimantan Timur

Authors

  • Yoga Achmad Rynaldy Universitas Mulawarman
  • Harjuni Hasan Universitas Mulawarman
  • Tommy Trides Universitas Mulawarman

DOI:

https://doi.org/10.61132/globe.v3i2.817

Keywords:

Tires, Tread Utilization Rate, Ton Kilometer Per Hourse, Life Time

Abstract

Dump truck tires are an important component in the operation of wheel-type units that require routine inspection because they directly affect the availability and performance of the transport equipment. In the OHT 777 type unit, six tires are used with a configuration of two tires in the front and four tires in the rear. This study aims to evaluate tire performance through the analysis of Key Performance Indicator (KPI) parameters, namely Ton Kilometer Per Hour (TKPH), Tread Utilization Rate (TUR), and tire life (lifetime), in order to assess the achievement of performance targets. The research method uses a quantitative approach with actual data collection in the field, including the preparation stages, primary and secondary data collection, data processing, and preparation of the final report. The data is processed to obtain the tire KPI value. The results of the analysis show that the TUR value for MICHELIN brand tires is 68.9% and BRIDGESTONE is 70.7%, still below the company's target of 85%. The TKPH value for the OHT 773 unit is 149 (with a TKPH rating of 207) and the 777 unit is 241 (with a TKPH rating of 514). The actual lifetime of BRIDGESTONE tires was recorded at 1,698.6 hm and MICHELIN at 2,268 hm, far below the target of 8,500 hm. Tire damage found included impact (23%), sidewall damage (18%), run flat (18%), bread damage (18%), sounder cut (14%), and foreign object puncture (9%). This evaluation is expected to be the basis for improving tire management, so that tire performance in the future can be more optimal and support the smooth operation of the unit.

 

References

Anomim.2004. Spesification & Application Hand Book. Japan : Edisi 26 Komatsu

Anonim (2013). Specifications & Application Handbook 31th Edition, Japan: Komatsu Ltd. Komatsu Ltd.

Anonim 2009. Spesification & Application Hand Book 30th Edition: Komatsu

Dalam Pemindahan Tanah Mekanis. Bandung

Hartman, H. L. (1987). Introductory Minning Engineering. Alabana: The University of Alabana Tuscaloosa.

Hustrulid, W dkk (1998). Open Pit Mine Planning and Design 1 Editioin.Balkema : England.

Indonesianto, I. Y. (2015). Memperkirakan Produksi dan Ongkos Alat-alat.

Indonesianto, I. Y. (2016). Pemindahan Tanah Mekanis. Jurusan Teknik Pertambangan Sekolat Tinggi Teknologi Nasional.Bandung

Indonesianto, I. Y.. 2005. Pemindahan Tanah Mekanis. Yogyakarta : Seri Tambang Umum UPN

Manurung, E. N. (2015). Estimasi faktor pengisian mangkuk excavator berdasarkan volume angkut dumptruck di PT. Agincourt Resources Kec.Batangtoru Kab.Tapanuli Selatan Sumatera Utara. Medan : Proposal Kerja Praktek ITS.

Murprasteyo, Widyanto. Evaluasi Kinerja Ban Pada Sistem Pengangkutan Tambang X.Jurusan Teknik Pertambangan.Bandung ITB.(2009)

Partanto, I. (1996). Pemindahan Tanah Mekanis Yogyakarta: Departemen Tambang Institut Teknologi Bandung.

Putra, indra Lesmana. Yulhendra, Dedi. Evaluasi Kinerja Ban HD 785-7 Dan 777 Pada Jalan Angkut Tambang Dari Front 2 Ke Crusher III A Dan III B Penambangan Batu Kapur PT.Semen Padang. Jurnal Bina Tambang Vol.6, No.1

Sari, Laura Puspita, . Analisa Performance Ban Pada Unit Produksi Overburden HD-785 Terhadap Produktivitas Tambang Batubara. Kurvatek Vol.5 No.1 2020

Tenriajeng, Andi Tenrisuki. 2003. Pemindahan Tanah Mekanis Jakarta, Penerbit guna darma

W.Hustrulid, M.KUTCHA & R.Martin 2013.Open pit mine Planing & Design volume 1- Fundamentals. CRC Press

Downloads

Published

2025-04-29

How to Cite

Yoga Achmad Rynaldy, Harjuni Hasan, & Tommy Trides. (2025). Evaluasi Performance Ban Micheline dan Brigstone Alat Angkut pada Pengangkutan Overburden dari Front Kerja Ke Disposal PT.Kaltim Diamond Coal Kabupaten Berau Kalimantan Timur. Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan, 3(2), 149–163. https://doi.org/10.61132/globe.v3i2.817

Similar Articles

<< < 1 2 3 4 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

1 2 > >>