Perencanaan Penggantian Komponen CVT pada Sepeda Motor Matik 160 cm3

Fahmi Faadhilah; Syamsul Hadi; Fitrianoor Anasia Pratama; Fajar Sugiharto; Arief Deny Setiawan; Fadilah Taufiqur Rohman

doi:10.61132/globe.v3i4.1259

Perencanaan Penggantian Komponen CVT pada Sepeda Motor Matik 160 cm3

Authors

Fahmi Faadhilah Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang
Fitrianoor Anasia Pratama Politeknik Negeri Malang
Fajar Sugiharto Politeknik Negeri Malang
Arief Deny Setiawan Politeknik Negeri Malang
Fadilah Taufiqur Rohman Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/globe.v3i4.1259

Keywords:

Automatic Motorcycle, Brake Pad Bowl, Brake Pads, CVT, Drive Belt

Abstract

Progressive wear on drive belt components, brake lining thickness, double lining bowl and other components of continuously variable transmission (CVT) on 160 cm3 automatic motorcycles are the problems faced. The purpose of component replacement planning is to obtain maintenance costs in 2026 and maintenance to profit ratio. The component replacement planning method includes collecting previous maintenance data, applying the inspection-replace-repair-overhaul (IRRO) method, evaluating component conditions, predicting component lifespan, predicting labor costs, predicting supporting equipment and supporting materials to be used in maintenance, predicting spare part replacement time, predicting maintenance costs in 2026, and calculating the maintenance cost to profit ratio. The results of component replacement planning obtained maintenance costs in 2026 are IDR 8.151.667,- with an estimated rental rate for Automatic Motorcycles of IDR 12,500/hour which has the potential to be rented for 3960 hours/year, and the ratio of maintenance costs to profits is 16.4% which implies that the 160 cm3 Automatic Motorcycle which was first used in 2021 is still prospective to generate profits and is suitable for use in the coming years.

References

Anugrah, R. A. (2022). Analysis of CVT (Continuously Variable Transmission) and the Influence of Variations on the Motorcycle. Jurnal Penelitian Saintek, 2(27), 69-80. https://doi.org/10.21831/jps.v2i27.53582

Anugrah, R.A. (2022). Troubleshooting Analysis of CVT (Continuously Variable Transmission) System on Honda Beat Motorcycles, Motivection: Journal of Mechanical, Electrical and Industrial Engineering, 4(1), 1-8. DOI: 10.46574/motivection.v4i1.98 https://doi.org/10.46574/motivection.v4i1.98

Ardiansyah, M. & Wicaksono, A. (2021). Analisis Pengaruh Variasi Roller CVT terhadap Akselerasi Sepeda Motor Matic 150 cc. Jurnal Teknik Mesin Nusantara, 5(2), 55-63. http://journal.unnes.ac.id/sju/index.php/asej

Hamdani, Y. & Siregar, T. (2022). Evaluasi Sistem Perawatan Preventif pada komponen CVT Menggunakan Metode Maintenance Scheduling. Jurnal Energi & Mesin, 8(1), 24-33.

Jusnita, & Lestari, P.A. (2023). Perbandingan Pemakaian Variasi Pegas CVT terhadap Torsi, Daya dan Konsumsi Bahan Bakar Honda Beat Pgm-Fi Tahun 2018, Surya Teknika, 10(1), 651-656. https://doi.org/10.37859/jst.v10i1.4919

Purnomo, B.C., Rahman, M.F.A., Biantoro, W. & Waluyo, B. (2024). Experimental Research on the Effect of CVT Roller and Spring Parameters On Matic Motorcycle Performance. Borobudur Engineering Review. 3(2), 49-65, DOI: 10.31603/benr.v3i2.10722 https://doi.org/10.31603/benr.v3i2.10722

Putra, R.A. (2023). Pengaruh Variasi Ukuran V-Belt dan Sudut Alur pada Permukaan Kampas Kopling CVT terhadap Daya dan Torsi Sepeda Motor 125 cc. Jurnal Teknik Mesin Polinema, 2(1), 132-138. http://jurnal.polinema.ac.id/index.php/j-meeg https://doi.org/10.33795/jmeeg.v2i1.1705

Rahardian, D. & Nugroho, W. (2022). Studi Penggunaan Material Aramid pada V-belt Sepeda Motor CVT untuk Meningkatkan Umur Pakai Komponen. Jurnal Material Teknik, 7(1), 39-48.

Saputra, I.Z. & Kamal, D.M. (2025). Perawatan Sistem Continuously Variable Transmission (CVT) Pada Sepeda Motor Matik Dalam Upaya Pencegahan Kerusakan Dini, Kohesi: Jurnal Multidisiplin Saintek, 10(5), 1-4.DOI: 10.8734/Kohesi.v1i2.365.

Susilo, R.D.P.S., Fitri, M., Kurniawan, F. & Sushton, S. (2024). Ulasan: Proses Manufaktur dan Pengaruh Weight Roller CVT pada Sepeda Motor Matic. TESME: Journal of Mechanical Engineering, 1(1), 18-28.

Tjiptady, B.C., Rahman, R.Z., Rohman, M., Nugroho, M.H. & Pradani, Y.F. (2024). Pengaruh Variasi Torsi Roller dan Lebar V-belt terhadap Top Speed Mesin. Metrotech: Journal of Mechanical & Electrical Technology, 2(3), 136-143. https://doi.org/10.33379/metrotech.v2i3.3378

Towijayaa, T. & Iskandar, I. (2022). Studi Kemiringan Drive Pulley terhadap Perubahan Daya dan Torsi pada Sepeda Motor Transmisi Otomatis Sistem V-Matic, 5(2), 46-52. https://doi.org/10.32662/gojise.v5i2.2362

Winoko, Y.A. & Rantetampang, T.A. (2022). Pengaruh Modifikasi Puli Primer CVT terhadap Performa Sepeda Motor Matic 110 cc, SINERGI, 20(1), 50-56. http://dx.doi.org/10.31963/sinergi.v20i1.3385 https://doi.org/10.31963/sinergi.v20i1.3385

Wiratmaja, I.G., Yasa, G.D.A. & Widayana, G. (2024). Peningkatan Unjuk Kerja Sepeda Motor Sistem Transmisi CVT dengan Variasi Kedalaman Clutch Housing Knurling. Jurnal INOVATOR, 8(1), 21-24. http://www.ojs.politeknikjambi.ac.id/index/inovator https://doi.org/10.37338/inovator.v8i1.470

Zhang, W., Guo, W., Zhang, C. & Kou, F. (2015). Loss of Strain Energy in Metal Belt for Continuously Variable Transmission (CVT) Pulley. Journal of Mechanical Science and Technology, 29(7), 2905-2912. https://doi.org/10.1007/s12206-015-0621-0 https://doi.org/10.1007/s12206-015-0621-0

Downloads

Published

2025-11-30

How to Cite

Fahmi Faadhilah, Syamsul Hadi, Fitrianoor Anasia Pratama, Fajar Sugiharto, Arief Deny Setiawan, & Fadilah Taufiqur Rohman. (2025). Perencanaan Penggantian Komponen CVT pada Sepeda Motor Matik 160 cm3. Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan, 3(4), 122–136. https://doi.org/10.61132/globe.v3i4.1259