Identifikasi Kecelakaan Kerja Menggunakan Metode JSA (Job Safety Analysis) di PT Kanaan Global Indonesia

Sabrina Salsabila; Erna Indriastiningsih; Anita Oktaviana Trisna Devi

doi:10.61132/jupiter.v4i1.1298

Identifikasi Kecelakaan Kerja Menggunakan Metode JSA (Job Safety Analysis) di PT Kanaan Global Indonesia

Authors

Sabrina Salsabila Universitas Sahid Surakarta
Erna Indriastiningsih Universitas Sahid Surakarta
Anita Oktaviana Trisna Devi Universitas Sahid Surakarta

DOI:

https://doi.org/10.61132/jupiter.v4i1.1298

Keywords:

Cutting Process, Job Safety Analysis, Occupational Accidents, Occupational Safety, Risk Matrix

Abstract

This study was conducted to analyze the causes of occupational accidents and to identify potential hazards in the material cutting process at PT Kanaan Global Indonesia using the Job Safety Analysis (JSA) approach. The high number of occupational accidents, totaling 15 cases during the period of December 2024–May 2025, indicates the existence of gaps in occupational safety control in this area. Data were collected through direct observation, interviews with workers, and the collection of historical data from the Occupational Health and Safety (OHS) unit. Risk analysis was carried out using a risk matrix to determine likelihood and severity values, followed by JSA for each work stage. The results identified 25 potential hazards, consisting of 4 risks in the extreme category, 9 in the high category, 7 in the medium category, and 5 in the low category. High-risk hazards were predominantly found in roll cutting and cutting press machines, which are characterized by mechanical hazards. Control recommendations focus on the implementation of engineering controls such as the installation of guarding systems and safety light curtains, improvements in safe work procedures, and increased discipline in the use of personal protective equipment (PPE). These findings demonstrate that the JSA method provides a comprehensive overview of risk sources and serves as an effective basis for formulating occupational accident control strategies within the company.

References

Al Husaini, C. B. (2023). Pemahaman risiko dan manajemen risiko. Jurnal Nuansa: Publikasi Ilmu Manajemen dan Ekonomi Syariah, 1(3), 318–325. https://doi.org/10.61132/nuansa.v1i3

Daryanto, S. (2018). Pedoman praktis K3LH: Keselamatan dan kesehatan kerja dan lingkungan hidup. Gava Media.

International Organization for Standardization. (1998). ISO 4413: Hydraulic fluid power—General rules and safety requirements for systems and their components. ISO.

Kementerian Ketenagakerjaan Republik Indonesia. (2021). Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 Tahun 2021 tentang tata cara penyelenggaraan program jaminan kecelakaan kerja, jaminan kematian, dan jaminan hari tua. https://peraturan.bpk.go.id

Machine Guarding Standard. (2010). Cutting through the confusion of machine guarding. Occupational Safety and Health Administration.

Occupational Safety and Health Administration. (2022). National emphasis program: Outdoor and indoor heat-related hazards. U.S. Department of Labor.

OHS & General Industry. (2020). Electrical safety program (6300-3): Associated OHS general industry and process construction safety. Author.

Penerapan keselamatan dan kesehatan kerja pada gedung kuliah bersama Kampus UNAIR Surabaya. (2003). JURMATEKS: Jurnal Manajemen Teknologi & Teknik Sipil. https://doi.org/10.30737/jurmateks

Profil lengkap PT Kanaan Global Indonesia. (n.d.). Asamulia. https://asamulia.com/profil-lengkap-pt-kanaan-global-indonesia/

Public Safety Sector. (2013). Risk assessment tool and guidance (including guidance on application). Author.

Ramos-Peralonso, M. J. (2023). Risk management. In Encyclopedia of toxicology (4th ed., Vol. 8, pp. V8-351–V8-356). Elsevier. https://doi.org/10.1016/B978-0-12-824315-2.00036-1

Safety Group. (n.d.). Air traffic organization policy N JO 3900.73. Federal Aviation Administration.

Saisandhiya, N. R. (2020). Hazard identification and risk assessment in petrochemical industry. International Journal for Research in Applied Science and Engineering Technology, 8(9), 778–783. https://doi.org/10.22214/ijraset.2020.31583

Saskia, V. N., Kirana, S., & Susihono, W. (2014). Implementasi pengendalian risiko kecelakaan kerja pada proses grinding dan welding di PT X. Jurnal Teknik Industri Untirta, 2(1), 206–211. https://jurnal.untirta.ac.id/index.php/jti/article/view/400

Shimandle, S. G. (2020). An OSHA update 2020. Occupational Safety and Health Administration.

Takala, E. P. (2005). Physical limitations and musculoskeletal complaints associated with work in unusual or restricted postures: A literature review. Journal of Safety Research, 36(1), 51–61. https://doi.org/10.1016/j.jsr.2004.12.001

Downloads

Published

2026-02-04

How to Cite

Sabrina Salsabila, Erna Indriastiningsih, & Anita Oktaviana Trisna Devi. (2026). Identifikasi Kecelakaan Kerja Menggunakan Metode JSA (Job Safety Analysis) di PT Kanaan Global Indonesia. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro Dan Informatika, 4(1), 45–55. https://doi.org/10.61132/jupiter.v4i1.1298