Perancangan Fasilitas Kerja Pada Bagian Staffing/Packing Dengan Pendekatan Ergonomi Untuk Mengurangi Risiko Musculoskeletal Disorder (MSDS)

Studi Kasus Di PT Excellence Qualities Yarn (PT EQY)

Authors

  • Septia Nur Safitri Universitas Sahid Surakarta
  • Anita Oktaviana Trisna Devi Universitas Sahid Surakarta
  • Bekti Nugrahadi Universitas Sahid Surakarta

DOI:

https://doi.org/10.61132/jupiter.v2i2.191

Keywords:

Musculoskeletal Disorders, Ergonomics, Ovako Work Analysis System, Nordic Body Map

Abstract

PT EQY is a textile company, especially yarn spinning. The activities of the staffing/packing department at PT EQY are packing, lifting, and moving cardboard boxes. This activity still relies on human power or manual material handling. This work is carried out repeatedly and continuously, causing complaints of pain in several parts of the body during work. This raises the risk of work postures such as Musculoskeletal disorders (MSDs). This research aims to produce a design for work aids that can reduce the risk of Musculoskeletal disorders (MSDs) using the Ovako Work Analysis System (OWAS) method. Based on the problem, work posture analysis was carried out using the OWAS method to find out whether the work posture of staffing/packing employees falls into the risky posture category or not. Based on the results of the Ovako Work Analysis System (OWAS) analysis research, it shows that the posture of staffing/packing workers is included in the high risk category and needs immediate improvement. This improvement involves designing work facilities, namely a handlift and packing table with an ergonomics approach, resulting in a handlift design with a height of 200 cm (2000 mm) and a packing table with a width of 200 cm (2000 mm) and a packing table with a length of 60 cm (600mm), width 60 cm(600mm), and height 104 cm(1040mm).

 

 

 

References

Anshari, M. H., & Yuamita, F. (2022). Analisis Pengukuran Postur Kerja Menggunakan Metode Ovako Work Posture Analysis System (OWAS) Pada Workshop Reparasi Dan Perawatan Tabung Gas (Studi Kasus: PT Petrogas Prima Services). Jurnal Teknik Industri, 1(1), 57–69.

Aprianto, B., Hidayatulloh, A. F., Zuchri, F. N., Seviana, I., & Amalia, R. (2021). Faktor risiko penyebab Musculoskeletal Disorders (MSDs) pada pekerja: A systematic review. Jurnal Kesehatan Tambusai, 2(2), 16–25.

OHSCO. (2007). Part 2: Resource Manual for the MSD Prevention Guideline for Ontario. Canada: FSC.

Pujianto, H., Dharma, F. P., Hindardi, D., & Tuwarno, T. P. (2021). Penentuan Setelan Rotor Mesin Open End Untuk Pembuatan Benang Ne 6 sebagai Upaya Jaminan Atas spesifikasi dan Kualitas Pada Workshop Pemintalan di Ak-Tekstil Solo. Indonesian Journal of Laboratory, 4(2), 46–53.

Santosa, J., Mahendra, D., & Pamungkas, A. R. (2019). Peran Budaya Organisasi Dalam Meningkatkan Pemanfaatan Teknologi Informasi Terhadap Kepuasan Pegawai Dan Kinerja Pegawai Di Pemerintah Kabupaten Grobogan. Journal of Indonesian Science Economic Research, 1(1), 37–44.

Setiorini, A. (2020). OWAS (Ovako Work Analysis System). Jurnal Kedokteran Universitas Lampung, 4(2), 197–204.

Sulianta, F. (2010). IT ergonomics. Jakarta: Elex Media Komputindo.

Downloads

Published

2024-02-01

How to Cite

Septia Nur Safitri, Anita Oktaviana Trisna Devi, & Bekti Nugrahadi. (2024). Perancangan Fasilitas Kerja Pada Bagian Staffing/Packing Dengan Pendekatan Ergonomi Untuk Mengurangi Risiko Musculoskeletal Disorder (MSDS): Studi Kasus Di PT Excellence Qualities Yarn (PT EQY). Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro Dan Informatika, 2(2), 260–273. https://doi.org/10.61132/jupiter.v2i2.191

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.