Perancangan Mesin Analisa Potongan Pellet Otomatis Menggunakan Software Blender Dengan Metode MDLC

Muhammad Yafi D; Rusindiyanto Rusindiyanto

doi:10.61132/jupiter.v3i1.672

Authors

Muhammad Yafi D Universitas Pembangunan Nasional Veteran Jawa Timur
Rusindiyanto Rusindiyanto Universitas Pembangunan Nasional Veteran Jawa Timur

DOI:

https://doi.org/10.61132/jupiter.v3i1.672

Keywords:

Blender, Cut Length Analysis Machine, Feed, MDLC, Quality Control

Abstract

PT XYZ) is a company which focuses on integrated aquaculture. Operating since 1987, PT XYZ has a fish and shrimp feed factory, fish and shrimp breeding and rearing as well as marine fish food processing and cold storage for local and global markets. At PT XYZ, especially the Quality Control division, there are still ineffective analysis activities, namely piece length analysis. An effort to increase productivity is by designing an automatic cut length analysis machine with the aim of maximizing efficiency and effectiveness. Therefore, the objective function of this research was carried out to design and increase productivity and reduce inefficient activities. From this, it is necessary to design and optimize activities to have a positive impact on the company. This research uses Blender software and the Multimedia Development Life Cycle (MDLC) method which includes concept, design, material collecting, assembly, testing and distribution. The results of this research show that this machine design is very effective and practical for the company and allows the company to improve maximum performance

References

Bony, T., Erwin, D. P., & Agung, K. H. (2023). Analysis of Mental Ray rendering techniques in 3D animation film. Jurnal Komputer, Informatika dan Teknologi, 3(2), 417–422. https://doi.org/10.53697/jkomitek.v3i2.1473

Eka, S., & Muhardi, H. S. (2022). Analysis of Eevee engine rendering engineering in making 3D animation videos Mukomuko Hospital. Jurnal Komputer, Informatika dan Teknologi, 2(2), 229–238. https://doi.org/10.53697/jkomitek.v2i2.845

Hardian, R., Amak, Y., & Muhammad, P. T. S. (2020). Analisis perbandingan teknik 3D rendering Cycles dan Eevee pada software Blender. Jurnal Fasilkom, 10(1), 11–19. https://doi.org/10.37859/jf.v10i1.1902

Hendri, S., Mahmuda, S., & Buge, C. W. (2022). Implementasi perbandingan dan optimalisasi teknik 3D rendering pada objek animasi profil Fakultas Teknik Universitas Gajah Putih Takengon. Jurnal Ilmiah Digital Teknologi, 4(4), 10–12. https://doi.org/10.37034/jidt.v4i4.262

Jimmy, P., & Brenky, J. (2024). Analisis perbandingan rendering animasi 3D menggunakan metode Workbench dan Eevee pada Blender. Smart Comp Jurnalnya Orang Pintar Komputasi, 13(1), 131–141. https://doi.org/10.30591/smartcomp.v13i1.6077

Nanang, R. P., & Mira, M. (2024). Perancangan desain 3D sebagai media promosi pada mesin penetas telur ayam dengan menggunakan software Blender. Jurnal Media Desain dan Kreatif, 8(Mdlc), 42–53.

Novi, R., & Ginanjar, S. (2021). Pembuatan animasi 3D usaha kecil menengah (Bengkel). Jurnal Sosial dan Riset Ilmiah, 4(3), 256. https://doi.org/10.54314/jssr.v4i3.694

Putra, D. R., Agus, T., & Rima, T. A. (2023). Animasi sinematik dinosaurus secara 3D menggunakan Blender dengan metode Pose to Pose. KLIK Kaji Ilmiah Informasi dan Komputasi, 3(6), 1100–1107. https://doi.org/10.30865/klik.v3i6.881

Rahmat, & Novi, Y. (2021). Augmented reality untuk materi bangun ruang menggunakan Unity 3D, Vuforia SDK, dan aplikasi Blender. Jurnal Teknologi dan Inovasi Keilmuan, 5(3), 86–92. https://doi.org/10.51179/tika.v5i3.59

Richard, P. S., Ilham, S., & Dewi, W. (2023). Pelatihan 3D modelling menggunakan Blender pada SMA Methodist-8 Medan. Prax. Jurnal Pengabdian Kepada Masyarakat, 2(2), 123–128. https://doi.org/10.47776/praxis.v2i2.791

Sakbani, & Nova, N. (2022). Perancangan desain interior gedung studio TV menggunakan software Blender. Narada Jurnal Desain dan Seni, 9(3), 307–314. https://doi.org/10.22441/narada.2022.v9.i3.005

Sultan, Samsudin, & Fitri, Y. (2022). Perancangan desain interior kamar menggunakan software Sketchup dan 3D Blender. Selodang Mayang Jurnal Ilmiah Badan Perencanaan Pembangunan Kabupaten Indragiri Hilir, 8(3), 231–239. https://doi.org/10.47521/selodangmayang.v8i3.271

Syndhe, Q. S., Septa, & Diki, R. (2024). Pelatihan membuat model 3D sederhana menggunakan Blender di SMK Yapia Parung. Abdi Jurnal Publik, 2(4), 188–193. https://jurnal.portalpublikasi.id/index.php/AJP/index188

Taronisohki, Z., Berto, N., & Soni, B. S. (2020). Pengenalan dasar aplikasi Blender 3D dalam pembuatan animasi 3D. Jurnal Abdimas Budi Darma, 1(1), 18–21.

Tengku, H. M. U., Aryanto, & Doni, W. (2022). Analisis perbandingan teknik 3D rendering Cycles dan Eevee pada software Blender. Jurnal Teknologi dan Sistem Informasi, 10(1), 11–19.