Penyempurnaan Desain dan Pembuatan Shock Breaker Belakang Tipe Pegas Sepeda Listrik
DOI:
https://doi.org/10.61132/konstruksi.v4i1.1309Keywords:
BLDC Motor, Electric Bicycle, Rear Shock Breaker, Springs, Trainer ToolsAbstract
The problem lies in the load lock from the wheel arm, the BLDC motor whose distance cannot be adjusted, and the flywheel whose movement is less smooth than the original design. The purpose of refining the design is to obtain smooth movement and the position of the load lock from the wheel arm, the BLDC motor that can be adjusted to be ergonomic and optimal. The method of refining the design and manufacture of the rear shock breaker spring type electric bicycle through the stages of working load analysis, the need for the distance of the load setting position and the BLDC motor, calculating the construction strength, manufacturing components, assembling components, and evaluating the results of the shock breaker manufacture. The results of refining the design and manufacture of the rear shock breaker spring type electric bicycle show that the movement of the load lock position from the wheel arm and the BLDC motor is smooth, the flywheel must be balanced, the dimensions of the shock breaker device are 120 cm long, 49.5 cm wide, 155 cm high, 120 rpm rotation speed, 2 cm shock breaker movement distance, and 1.5 cm sideways movement deviation which implies being able to provide adequate damping for electric bicycle riders well.
References
Anwardi, Pratiwi, G. N., Wibowo, R. P., Meilati, H., & Muadzin, P. (2024). Perancangan dan pengembangan treker shock breaker dengan pendekatan rasional. Jurnal Teknologi dan Manajemen Industri Terapan, 3(3), 281–294. https://doi.org/10.55826/jtmit.v3i3.305
Ariyanto, N. A. (2016). Analisa jenis pelumas suspensi depan sepeda motor listrik trail. Jurnal Nozzle, 5(2), 123–126. https://doi.org/10.30591/nozzle.v5i2.809
Arman, Dullah, M. J., & Muhammad, A. K. (2020). Perancangan sepeda listrik menggunakan motor BLDC dengan penggerak depan untuk area perumahan. In Prosiding Seminar Nasional Penelitian & Pengabdian kepada Masyarakat Bidang Ilmu Teknik Mesin, Industri, Energi Terbarukan, Teknologi Pertahanan (pp. 90–96).
Budi, S. S., Sanjaya, F. L., & Ayu, F. (2022). Perancangan sistem suspensi dan analisis pegas sepeda motor listrik PHB menggunakan finite element method (FEM). Jurnal Rekayasa Material, Manufaktur dan Energi, 5(1), 33–38. https://doi.org/10.30596/rmme.v5i1.10261
Ferdiansyah, R., & Wailanduw, A. G. (2025). Pengembangan media pembelajaran trainer sistem pengisian menggunakan beban. JPTM, 14(1), 1–8.
Firmansyah, & Fiqri, M. (2025). Perancangan trainer kit motor listrik BLDC sebagai media pembelajaran (Diploma thesis). Politeknik Perkapalan Negeri Surabaya. http://repository.ppns.ac.id/id/eprint/6727
Girawan, B. A., Laksana, N. A. S., & Prabowo, D. (2022). Perancangan sepeda listrik Semoli untuk beban 80 kg. Accurate: Journal of Mechanical Engineering and Science, 3(2), 1–7. https://doi.org/10.35970/accurate.v3i2.1556
Kusnanto, H., Rizaly, A., & Pangestu, F. M. A. (2024). Peningkatan nilai konstanta kekakuan pada shock absorber bekas sepeda motor dengan proses annealing. Jurnal ReSEM, 2(1), 61–72. https://doi.org/10.30651/resem.v2i1.20609
Laksana, N. A. S., Girawan, B. A., & Pribadi, J. S. (2022). Desain dan analisis karakteristik pegas koil sistem suspensi belakang untuk kendaraan ringan sepeda motor listrik. Jurnal Infotekmesin, 13(1), 59–66. https://doi.org/10.35970/infotekmesin.v13i1.908
Majanasastra, R. B. S. (2013). Analisis defleksi dan tegangan shock absorber roda belakang sepeda motor Yamaha Jupiter. Jurnal Ilmiah Teknik Mesin, 1(1), 1–7. http://ejournal-unisma.net
Muslimin, Dhyani, P. P., Luqyana, D., & Kristianto, D. J. (2023). Perancangan dan pembuatan prototipe motor listrik BLDC 350 dan 3000 watt. Jurnal Mekanik Terapan, 4(2), 78–83. https://doi.org/10.32722/jmt.v4i2.5888
Saputra, G. E. (2024). Analisa shock absorber sepeda motor dengan alat uji mekanis. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 3(3), 291–312. https://doi.org/10.55606/jtmei.v3i3.4248
Setyawan, R. T., Gunawan, & Umira, S. (2025). Analisis perancangan suspensi belakang pada kendaraan listrik berbasis standar ISO 2631-1. Jurnal Mekanik Terapan, 6(2), 53–59. https://doi.org/10.32722/jmt.v6i2.7533
Tianur, Nurcahyo, M. B. A., Rahmawaty, M., & Jaenudin, J. (2023). Rancang bangun sepeda listrik menggunakan motor DC brushless. Jurnal Elementer, 9(1), 151–159. https://doi.org/10.35143/elementer.v9i1.5933
Usman, M. K., & Syarifudin. (2016). Rancang bangun suspensi belakang tipe swing arm pada mobil listrik Tuxuci 2.0. Jurnal Nozzle, 5(2), 140–144. https://doi.org/10.30591/nozzle.v5i2.813
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
