Pengaruh Sudut dan Kekasaran Pulley terhadap Torsi Sepeda Motor Matic 108 cm3 Tahun 2011

Muhammad Rizqi Maulana; Syamsul Hadi

doi:10.61132/konstruksi.v3i4.1180

Authors

Muhammad Rizqi Maulana Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/konstruksi.v3i4.1180

Keywords:

automatic motorcycle, CVT, pulley angle, surface roughness, torque

Abstract

A decline in performance in automatic motorcycles that have been used for a long time is a common problem caused by wear and tear on the Continuously Variable Transmission (CVT) system. This condition results in a reduction in the clamping force of the V-belt on the pulley, causing slippage and a decrease in transmission capacity. Based on the manufacturer's specifications, the torque is 8.32 Nm at 5500 rpm, while the test results show a torque of 7.41 Nm at 6500 rpm, a decrease of 10.9%. The study aims to analyze the effect of variations in pulley angle and surface roughness on the torque value of a 108 cm³ automatic motorcycle as a method to restore transmission performance without replacing the main components. The pulley angles tested were 14°, 13.8°, and 13.5°, while the surface roughness was varied based on the turning process with cutting inserts having nose radii of 0.2 mm, 0.4 mm, and 0.8 mm. The testing was conducted using a dynamometer at an engine speed range of 6000 – 9000 rpm. The results showed that the combination of a 13.8° pulley angle with a 0.2 mm cutting insert nose radius produced a torque of 7.41 Nm at 6500 rpm, an increase of 8.2% compared to the standard 14.5° configuration, which only produced 6.85 Nm. Modifying the pulley angle and surface roughness was proven to increase the V-belt clamping force, thereby improving transmission performance.

References

Da Wara, M. I., Marsudi, M., & Furqon, G. R. (2021). Pengaruh variasi sudut kemiringan drive pulley pada continuously variable transmission (CVT) dengan variasi sudut 14° dan 13° terhadap torsi pada Yamaha Fino tahun 2012. Jurnal Teknik Mesin Otomotif, 9(1), 1-7.

Fachrudin, A. R., & Astuti, F. A. (2024). Pengaruh layer height dan printing speed terhadap tingkat kekasaran permukaan hasil additive manufacturing. Majamecha, 6(1), 46-57. https://doi.org/10.36815/majamecha.v6i1.2971

Fatkhurrokhman, A. F., Suwahyo, & Septiyanto, A. (2021). Pengaruh penggunaan modul CVT (continuously variable transmission) mobil dan pengajarannya untuk meningkatkan hasil belajar kompetensi dasar transmisi. Jurnal Pendidikan Teknik Mesin, 2(21), 6-10. https://journal.unnes.ac.id/nju/index.php/JPTM/article/view/40019

Handoko, R., Santoso, D. T., & Dryer, R. (2022). Pengaruh variasi parameter operasi terhadap performa sistem mekanik. Jurnal Ilmiah Wahana Pendidikan, 8(8). https://doi.org/10.5281/zenodo.6618707

Harsanta, H., & Parta. (2020). Pengaruh variasi sudut primary pulley pada transmisi sepeda motor Scoopy 110 cc tahun 2014 terhadap daya dan torsi. Motor Bakar: Jurnal Teknik Mesin, 4(1), 25-30. https://doi.org/10.31000/mbjtm.v4i1.5710

Irawan, B., Purwoko, M., Monasari, R., & Firdaus, A. H. (2025). Pengaruh sudut drive pulley dan massa roller terhadap daya dan tingkat kebisingan pada sepeda motor bertransmisi otomatis 110 cc. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 3(3), 179-192. https://doi.org/10.61132/venus.v3i3.935

Juniar, B. A., & Santoso. (2021). Analysis of the effect of pulley angle and roller weight on power and torque on 110cc modified matic motorcycle. Journal of Mechanical Engineering, 1(1), 41-50.

Juniar, B. A., & Santoso. (2023). Analisis pengaruh sudut pulley dan berat roller terhadap daya dan torsi pada motor matic modifikasi 110 cc. Jurnal Teknik Mesin Modern, 2(1), 41-48. https://doi.org/10.33795/jmeeg.v1i1.3382

Masarufiyah, Hariyadi, S., & Miftahurrohman, M. (2020). Analisa kekasaran permukaan pada proses pembubutan material AISI 4140 dengan nose radius dan cutting parameter yang berbeda. Jurnal Keilmuan dan Terapan Teknik, 9(1), 31-38.

Noviana, S., Pratama, R. A., Raafi, M. A., & Falah, L. S. (2023). Pengaruh variasi kemiringan sudut kontak primary pulley dan variasi massa roller terhadap kinerja motor bakar matic injeksi 110 cc. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 2(3), 163-169. https://doi.org/10.55606/jtmei.v2i3.2129

Nurwanto, A. D., & Hadi, S. (2024). Analisis sudut pulley dan berat rol transmisi terhadap torsi sepeda motor matic 150 cm³. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 2(4), 311-323. https://doi.org/10.61132/venus.v2i4.446

Palova, K., Kelemenova, T., & Kelemen, M. (2023). Measuring procedures for evaluating the surface roughness of machined parts. Manufacturing Engineering Review, 1(2), 1-48. https://doi.org/10.3390/app13169385

Sinatrya, C. A., & Purwoko. (2021). Pengaruh variasi massa roller dan ukuran V-belt CVT terhadap daya dan torsi motor matic 125 cc. Jurnal Teknik Mesin Terapan, 1(1), 18-25. https://doi.org/10.33795/jmeeg.v1i1.3351

Towijaya, T., & Iskandar, I. (2022). Studi kemiringan drive pulley terhadap perubahan daya dan torsi pada sepeda motor transmisi otomatis sistem V-Matic. Gorontalo Journal of Infrastructure and Science Engineering, 5(2), 46-52. https://doi.org/10.32662/gojise.v5i2.2362

Waluyo, J., Duniawan, A., & Permana, A. (2021). Pengaruh kemiringan sudut kontak drive pulley continuously variable transmission (CVT) standar dan modifikasi pada sepeda motor Yamaha Soul GT terhadap keluaran daya. Simetris, 15(1), 43-47. https://doi.org/10.51901/simetris.v15i01.184

Widiarto, S. A., Hadi, F. S., Basuki, & Irfa'i, M. A. (2023). Pengaruh ukuran pahat insert dan kedalaman terhadap kekasaran permukaan besi SCM 440. Jurnal Motion (Manufaktur, Otomasi, Otomotif, dan Energi Terbarukan), 3(1), 33-38. https://doi.org/10.33752/motion.v2i1.5353

Wijaya, D. A., Dantes, K. R., & Nugraha, I. N. P. (2021). Analisis pengaruh bentuk sliding roller terhadap torsi dan daya kendaraan berbasis continuously variable transmission. Quantum Teknika: Jurnal Teknik Mesin Terapan, 2(2), 52-58. https://doi.org/10.18196/jqt.v2i2.10788

Winoko, Y. A., & Rantetampang, T. A. (2022). Pengaruh modifikasi puli primer CVT terhadap performa sepeda motor matic 110 cc. Jurnal Teknik Mesin Sinergi, 20(1), 50-56. https://doi.org/10.31963/sinergi.v20i1.3385

Zaidan, A. D., Latief, A. E., & Anggraeni, N. D. (2023). Analisa karakterisasi material produk slide piece CVT berbahan komposit berpenguat serat nanas dengan fraksi volume 10%. Jurnal Rekayasa Energi dan Mekanika, 3(1), 77-85. https://doi.org/10.26760/jrem.v3i1.77

Zainuri, F., Tullah, M. H., Nuriskasari, I., Subarkah, R., Widiyatmoko, W., Prasetya, S., Susanto, I., Belyamin, B., & Abdillah, A. A. (2022). Performa kendaraan konversi listrik melalui pengujian dynotest. Jurnal Mekanik Terapan, 3(2), 44-49. https://doi.org/10.32722/jmt.v3i2.4621