Analisis Postur Kerja Dengan Rapid Entire Body Assessment (REBA) Untuk Mengurangi Risiko Musculoskeletal Disorders

Berty Dwi Rahmawati; Eka Anggraini

doi:10.61132/manufaktur.v2i3.441

Authors

Berty Dwi Rahmawati Universitas Pembangunan Nasional Veteran Yogyakarta
Eka Anggraini Universitas Pembangunan Nasional Veteran Yogyakarta

DOI:

https://doi.org/10.61132/manufaktur.v2i3.441

Keywords:

Lifting, REBA, Work Posture

Abstract

PT SC is engaged in the cement industry. One of the parts in PT SC is the packing plant, in which there are various activities such as lifting and arranging sack cement on trucks. The lifting and arrangement of the sack cement is carried out manually by the worker in a bent body position and added with a load of cement that must be lifted, namely 50 kg, this position is carried out repeatedly with a working duration of less than 12 hours. The REBA (Rapid Entire Body Assessment) method will be used to analyze the work posture of workers. This method is used to analyze body posture which is used to analyze all parts of the body. Work posture assessment was carried out on four workers with conditions before and after sacking cement removal. Based on the measurement results, the average score obtained is +10 which means it has a high risk so that investigation and implementation of changes are needed.

References

Abdullah, N.,, et all. (2023). Field Measurement of hand Forces of Palm Oil harvesters and Evaluating the Risk of Work-related Musculoskeletal Disorders (WMSDs) Through Biomechanical Analysis. International Journal of Industria Ergonomics. https://doi.org/10.1016/j.ergon.2023.103468

Enez, K., et all. (2019). Comparison of Ergonomic Risk Assessment Outputs From OWAS and REBA in Forestry Timber Harvesting. International Journal of Industrial Ergonomics, 51-57. https://doi.org/10.1016/j.ergon.2019.01.009

Kee, Dohyung. (2021). Comparison of OWAS, RULA, and REBA for Assesing Potential Work-Related Musculoskeletal Disorders. International Journal of Industrial Ergonomics. https://doi.org/10.1016/j.ergon.2021.103140

Kodle, N., et all. (2023). Ergonomic Risk Assessment of Tasks Performed by Workers in Granite and Marble Units Using Ergonomics Tool’s REBA. Materials Today Proceeding, 72 (3), 1903-1916. https://doi.org/10.1016/j.matpr.2022.10.153

Hariyono, W., et all. (2010). Perancangan Sistem Kerja yang Ergonomis di Industri Pemeliharaan Lokomotif “Balai Yasa Yogyakarta”. Jurnal Manajemen Pelayanan Kesehatan, 13(1), 23-32.

Law, Mitchelle., et all (2022). REBA Assessment Of Patient Transfer Work Using Sliding Board and Motorized Patient Transfer Device. Internasional Journal Of Industrial Ergonomics, 1-13. https://doi.org/10.1016/j.ergon.2022.103322

Mahto, P. K., et all. (2018). Prevalence Of Work-Related Musculoskeletal Disorders In Agricultur Farmers Of Bhaktapur District, Nepal. Internasional Journal Of Occupational Safety and Health, 8(1), 3-7.

Manuaba, A. (2003). Total Ergonomic Approach To Enhance And Harmonize The Development Of Agriculture, Tourism, And Small Acale Industry, With Special Reference To Bali. In National Penelitian.

Mardi, T., et all. (2018). Analisis Postur Kerja Pada Pembuatan Rumah Boneka Dengan Metode Rapid Entire Body Assesment. Jurnal String, 3(2), 107-118.

Middlesworth, M., A Step-by-Step Guide: Rapid Entire Body Assesment (REBA), Ergonomics Plus, Indiana.

Monagle, N., et all. (2023). Ergonomic Assessment of Surgical Residents Using the Rapid Upper Limb and Rapid Entire Body Assessments. Archives of Physical Medicine and Rehabilitattion, 104(3), 27. https://doi.org/10.1016/j.apmr.2022.12.076

Mustika, Pande., et al. (2016). Ergonomi Dalam Pembelajaran Menunjang Profesionalisme Guru Di Era Global. Jurnal Pendidikan Indonesia, 5(1), 82-96.

Norita, et al. (2018). Pengukuran Waktu Baku Proses Mixing, Filling, dan Packing Mood Lipstick Menggunakan Metode Pengukuran Waktu Jam Henti di PT.X. Jurnal Teknokris, 12(1), 15-21.

Pramestari, Diah. (2017). Analisis Postur Tubuh Pekerja Menggunakan Metode Ovako Work Posture Analysis System (OWAS). Jurnal Teknologi, 1(2), 22-29.

Purba, Nabillah., et al. (2021). Revolusi Industri 4.0 : Peran Teknologi Dalam Eksistensi Penguasaan Bisnis Dan Implementasinya. Jurnal Perilaku dan Strategi Bisnis, 9 (2), 91-98.

Qurthuby, M., et all. (2022). Analisis Postur Kerja di PT. Toba Pulp Lestari Menggunakan Metode Rapid Entire Body Assessment (REBA). Surya teknika, 9 (2), 416-422.

Rafian, M., et all. (2017). Analisis Beban Kerja Mekanik Pada Departemen Plant Dengan Metode Work Sampling (Studi Kasus Pada PT XYZ). Jurnal Optimasi Sistem Industri, 10 (1), 35-42.

Riadi, S., et all. (2022). Analisis Tingkat Resiko Pekerja Pada Bagian Perakitan Lampu LED AC PJU Dengan Pendekatan Nordic Body Map, Rapid Entire Body Assessment (REBA) dan Rapid Upper Limb Assessment (RULA). Jurnal Ilmiah Teknologi dan Rekayasa, 27(1), 1-11. https://doi.org/10.35760/tr.2022.v27i1.3852

Santoso, Gempur. (2004). Ergonomi. Jakarta: Prestasi Pustaka.

Sasmoko, Ari. (2018). Analysis Of use Of Silica Sand As Replacement Of Fine Aggregate On Concrete Mixture. Jurnal Riset Pembangunan, 1(1), 36-47.

Sulaiman, F., et all. (2016). Analisis Postur Kerja Pekerja Proses Pengesahan Batu Akik Dengan Menggunakan Metode REBA. Jurnal Teknovasi, 3 (1), 16-25.

Tarwaka. (2015). Ergonomi Industri Dasar-Dasar Pengetahuan Ergonomi Dan Aplikasi Di Tempat Kerja. Surakarta: Harapan Press

Tarwaka, B., et all. (2004). Ergonomi Untuk Keselamatan, Kesehatan Kerja, dan Produktivitas. Surakarta: Uniba Press.

Wijaya, I., et all. (2018). Analisis Postur Kerja Dengan Metode Rapid Upper Limb Assessment (RULA) Pada Operator Mesin Extruder di Stasiun Kerja Extruding Pada PT XYZ. Jurnal Optimasi Sistem Industri, 11 (1), 49-57.

Yuliani, I., et all. (2021). Analisis Penilaian Potur Kerja Menggunakan Metode Nordic Body Map (Nbm), Rapid Upper Limb Assessment (Rula, dan Rapid Entire Body Assessment (Reba) Pada Tenaga Kerja. Jurnal Antara Keperawatan, 4(3), 101-109.