Judul Analisis Risiko Kerja pada Area Workshop Hydraulic dengan Metode HIRA (Hazard Identification and Risk Assesment) di PT. XYZ

Muhamad Bob Anthony

doi:10.61132/manufaktur.v2i3.535

Authors

Muhamad Bob Anthony Universitas Serang Raya

DOI:

https://doi.org/10.61132/manufaktur.v2i3.535

Keywords:

hazard identification and risk assesment, risk, workshops

Abstract

Workshop PT. XYZ is a part of a company that carries out activities in the field of maintenance and repair, especially hydraulic, pneumatic and lubrication equipment. These workshop activities include welding activities, operating machine tools and other mechanical work. This study aims to determine the value of the potential risk of occupational hazards and the level of risk of potential occupational hazards at PT. XYZ in the workshop area. This study uses an approach with the HIRA (Hazard Identification and Risk Assessment) method to determine the value of the risk of occupational hazards and the level of risk of potential occupational hazards. The results obtained by using HIRA (hazard identification and risk assessment) were obtained as many as 29 risks which were classified based on potential hazards, namely 28% extreme risk, 41% high risk, moderate risk of 31% and there is no low risk. Improvement recommendations are made based on the level of extreme risk (extreme risk) and high risk (high risk) to prevent and reduce the level of risk of work accidents in the workshop area, while for the moderate risk level, the mitigation recommendation is to supervise the work and make an SWI (simplified working instruction) to make it easier for workers to understand safe and correct work procedures.

References

Afnella, W., & Niswati, T. (2021). Analisis risiko kecelakaan kerja metode HIRA (Hazard Identification and Risk Assessment) di PT. X. Fakultas Kesehatan Masyarakat, 5(2).

Ambarani, A. Y., & Tualeka, A. R. (2016). Hazard identification and risk assessment (HIRA) pada proses fabrikasi Plate Tanki 42-T-501A PT. Pertamina (Persero) RU VI Balongan. Fakultas Kesehatan Masyarakat Universitas Airlangga, 5(2).

Apsari, A. E., & Kurniawan, R. (2023). Analisis potensi bahaya dan risiko kecelakaan kerja pada bagian produksi dengan metode JSA dan HIRA. Fakultas Teknik Industri, 3(2).

Aryanto, Y. (2008). Usulan program keselamatan dan kesehatan kerja berdasarkan OHSAS 18001:1999 dan Permenaker 1996. Institut Teknologi Bandung.

Australian/New Zealand Standard. (2004). Australian Standard/New Zealand Standard 4360:2004 Risk Management.

Damayanti, A. F., & Mahbubah, N. A. (2023). Implementasi metode Hazard Identification Risk Assessment and Risk Control guna peningkatan keselamatan dan kesehatan karyawan di PT ABC. Fakultas Teknik Industri, 6(2).

Fakhriansyah, M., Fathimahhayati, L. D., & Gunawan, S. (2022). Analisis risiko keselamatan dan kesehatan kerja menggunakan metode Hazard Identification and Risk Assessment (HIRA) dan Job Safety Analysis (JSA) studi kasus: Arjuna Interior. G-Teich: Jurnal Teknologi Terapan, 6(2), 295–305.

Faridl, M. S. (2020). Analisis potensi bahaya dengan metode Hazard Identification and Risk Assessment (HIRA) dan Job Safety Analysis (JSA) studi kasus: UMKM Logam di Yogyakarta. Universitas Islam Indonesia.

Halifasa, A. I., & Apsari, A. E. (2023). Analisis potensi bahaya dengan menggunakan metode Identification and Risk Assessment (HIRA) dan Job Safety Analysis (JSA) pada PT. XYZ. Fakultas Teknik Industri, 2(3).

Maulana, M. A., Nursanti, E., & Haryanto, S. (2022). Upaya pencegahan terjadinya kecelakaan kerja di bagian produksi pada UD. Basori Jaya menggunakan metode Hazard Identification and Risk Assessment. Jurnal Valtech, 5(1), 73–78.

Moniaga, F., & Rompis, V. (2019). Analisa sistem manajemen kesehatan dan keselamatan kerja (SMK3) proyek konstruksi menggunakan metode Hazard Identification and Risk Assessment. Jurnal Ilmiah Realtech, 15(2), 65–73.

Ramli, S. (2010). Pedoman praktis manajemen risiko dalam perspektif K3. Jakarta: Dian Rakyat.

Ramli, S. (2010). Sistem manajemen keselamatan dan kesehatan kerja OHSAS: 18001. Jakarta: Dian Rakyat.

Restuputri, D. P., & Sari, R. P. D. (2015). Analisis kecelakaan kerja dengan menggunakan metode Hazard and Operability Study (HAZOP). Jurnal Ilmiah Teknik Industri, 14(1), 24–35.

Roehan, K. R. A., Yuniar, & Desrianty, A. (2014). Usulan perbaikan sistem manajemen keselamatan dan kesehatan kerja (SMK3) menggunakan metode Hazard Identification and Risk Assessment (HIRA). Jurnal Online Institut Teknologi Nasional, 2(2).

Rohmah, S., & Kuswinarti, K. (2021). Analisa potensi bahaya dan upaya pencegahan kecelakaan kerja dengan Job Safety Analysis (JSA) pada divisi pencucian di PT. X. Proceedings Series on Physical & Formal Sciences, 1, 50–55.

Sedarmayanti. (2009). Sumber daya manusia dan produktivitas kerja (Cet. ketiga). Bandung: CV.

Sulistiyowati, R., Suhardi, B., & Pujiyanto, E. (2019). Evaluasi keselamatan dan kesehatan kerja pada praktikum perancangan teknik industri menggunakan metode Job Safety Analysis. J@ti Undip: Jurnal Teknik Industri, 14(1), 11–20.

Wildan, A., Sukwika, T., & Kholil, K. (2022). Analisa potensi bahaya pada prosesi pembuatan tablet onkologi menggunakan metode HIRA JSA. Journal of Applied Management Research, 2(1), 53–65.

Wisnugroho, et al. (2024). Identifikasi potensi bahaya dan pengendalian area pengisian galon menggunakan metode HIRA di PT. Taubah Jaya Abadi Kabupaten Berau, Kalimantan Timur. Teknologi Rekayasa Logistik, 8(2).