Analisis Kecelakaan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) Pada UKM Peuyeum Bandung 1

Authors

  • Amanda Septriannisa Sutadi Universitas Telkom

DOI:

https://doi.org/10.61132/manufaktur.v2i2.319

Keywords:

Work accidents, HAZOP, Small and Medium Enterprises

Abstract

The process of making peuyeum carried out by UKM Peuyeum Bandung 1 is still done manually, where it is done for a long time and in the same position and the equipment used by UKM Peuyeum Bandung 1 does not meet occupational health and safety standards. In carrying out this work there may be risks. The aim of this research is to minimize risks in making peuyeum by UKM Peyeum Bandung 1. The type of research carried out is quantitative research. The conclusion of the research on risk identification and work safety at UKM Peuyeum Bandung 1 is that the results of hazard identification using HAZOP analysis at UKM Peuyeum Bandung 1 show that there are 5 sources of danger, namely worker attitudes, foreign objects in the work area, stove, peeler and washing area. One of the processes at the source of worker attitude hazards is getting an "Extreme" rating so that it must be prioritized to get recommendations or suggestions for improvement first. By using the HAZOP analysis method, you can socialize and create banners on the importance of K3, adding occupational health and safety equipment to SMEs, especially gloves, safety shoes and masks.

 

 

References

Giananta, P., Hutabarat, J., & Soemanto, S. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech, 3(2), 106-110.

Hyatt, N. (2018). Guidelines for process hazards analysis (PHA, HAZOP), hazards identification, and risk analysis. CRC press.

Rahayu, E. P., Ratnasari, A. V., Wardani, R. W. K., Pratiwi, A. I., Ernawati, L., Lestari, S., ... & Prasetyo, E. (2022). Kesehatan dan Keselamatan Kerja. Pradina Pustaka.

Ningsih, S. O. D., & Hati, S. W. (2019). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Menggunakan Metode Hazard and Operability Study (Hazop) Pada Bagian Hydrotest Manual Di Pt. Cladtek Bi Metal Manufacturing. Journal of Applied Business Administration, 3(1), 29-39.

Nando, R. N., & Yuamita, F. (2021). Analisis Kesehatan dan Keselamatan Kerja dengan Metode Hazard dan Operability Pada Area Kerja Lantai Produksi CV. Lebu Berkah Jaya. Journal of Industrial Engineering UPY, 1(1)

Published

2024-05-20

How to Cite

Amanda Septriannisa Sutadi. (2024). Analisis Kecelakaan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) Pada UKM Peuyeum Bandung 1. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 2(2), 53–61. https://doi.org/10.61132/manufaktur.v2i2.319

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.