Analisis Perawatan Mesin Bending Menggunakan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (Fta) di PT. XYZ

Ade Ismail Firzatulloh; Tarman Tarman; Afif Fawa Idul Fata

doi:10.61132/venus.v3i5.1121

Authors

Ade Ismail Firzatulloh Sekolah Tinggi Teknologi Wastukancana
Tarman Tarman Sekolah Tinggi Teknologi Wastukancana Purwakarta
Afif Fawa Idul Fata Sekolah Tinggi Teknologi Wastukancana Purwakarta

DOI:

https://doi.org/10.61132/venus.v3i5.1121

Keywords:

Bending Machine, Downtime, FMEA, FTA, Hydraulic Valve

Abstract

This study analyzes failures in the bending machine at PT. XYZ and determines maintenance priorities to reduce downtime and improve production efficiency. The company often faces repeated breakdowns, especially in hydraulic and control components, which negatively impact productivity. To address these issues, the research applies Failure Mode and Effect Analysis (FMEA) and Fault Tree Analysis (FTA). The study employs a descriptive qualitative approach using downtime and repair data from September 2024 to February 2025. FMEA was conducted to identify failure modes, effects, and causes, and to calculate the Risk Priority Number (RPN) as a basis for prioritization. FTA was then applied to trace root causes by mapping logical relationships among contributing factors leading to the top event. Recommendations were formulated with the 5W+1H method to propose preventive maintenance actions. The results indicate that the hydraulic valve is the most critical component, with an RPN value of 504 due to oil contamination. The main causes include damaged filters, improper oil usage, and lack of a cooling system. The hydraulic cylinder seal and back gauge were also found to contribute significantly to machine failures. FTA analysis revealed root causes such as inadequate maintenance procedures, unsuitable materials, and insufficient inspections. The proposed improvements involve regular replacement of oil filters, structured lubrication schedules, installation of oil coolers, and technician training to strengthen compliance with standard procedures. Overall, the integration of FMEA and FTA provides a systematic approach to identify critical components and root causes, enabling PT. XYZ to implement preventive strategies that minimize failures, reduce downtime, and improve bending machine performance sustainably.

References

Ariyanty, R. (2021). Penerapan metode FMEA dan FTA dalam mengidentifikasi penyebab kerusakan mesin vertical shaft pada PT. Prima Karya Manunggal Pangkep. Penerapan Metode FMEA Dan FTA Dalam Mengidentifikasi Penyebab Kerusakan Mesin Vertical Shaft Pada PT. Prima Karya Manunggal Pangkep Tugas, 10.

Gunawan, C. V., & Tannady, H. (2016). Analisis kinerja proses dan identifikasi cacat dominan pada pembuatan bag dengan metode statistical process control (Studi Kasus: Pabrik Alat Kesehatan PT.XYZ, Serang, Banten). J@Ti Undip: Jurnal Teknik Industri, 11(1), 9–14. https://doi.org/10.12777/jati.11.1.9-14

Hakim, A., Pratiwi, A. I., & Prasetyo, A. (2020). Usulan preventive maintenance dengan metode reliability centered maintenance untuk meminimalkan biaya perawatan mesin. Industry Xplore, 5(1), 26–33. https://doi.org/10.36805/teknikindustri.v5i1.901

Hardono, J., Pratama, H., & Friyatna, A. (2019). Analisis cacat produk green tyre dengan pendekatan seven tools. Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(1), 1. https://doi.org/10.30656/intech.v5i1.1462

Indrawan, R. A., & Al-faritsy, A. Z. (2025). Pengendalian kualitas brownies dengan metode FMEA dan FTA di UMKM Fudgy Brownies. 2(1), 20–26.

Kurniawan, B. H., Yusuf, M., & Parwati, C. I. (2017). Evaluasi perawatan mesin dengan metode fault tree analysis (FTA) dan failure mode and effect analysis (FMEA) pada CV. Julang Marching. Jurnal REKAVASI, 5(2), 80–86. https://journal.akprind.ac.id/index.php/rekavasi/article/view/267

Muhdor, M., Abdillah, H., & Sidik, M. (2023). Analisa pemeliharaan mesin bubut dengan fault tree analysis (FTA) dan failure mode and effect analysis (FMEA) di CV. Maja Teknik, Pandeglang. Journal of Vocational Education and Automotive Technology, 5(2), 174. https://doi.org/10.31331/joveat.v5i2.2670

Nur, M. (2018). Analisis kecelakaan kerja dengan menggunakan metode FTA dan 5S di PT. Jingga Perkasa Printing. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 4(1), 55. https://doi.org/10.24014/jti.v4i1.6038

Pasaribu, M. I., Ritonga, D. A. A., & Irwan, A. (2021). Analisis perawatan (maintenance) mesin screw press di pabrik kelapa sawit dengan metode failure mode and effect analysis (FMEA) di PT. XYZ. JITEKH, 9(2), 104–110. https://doi.org/10.35447/jitekh.v9i2.432

Safira, S. D., & Damayanti, R. W. (2022). Analisis defect produk dengan menggunakan metode FMEA dan FTA untuk mengurangi defect produk (Studi Kasus: Garment 2 dan Garment 3 PT Sri Rejeki Isman Tbk). Seminar Dan Konferensi Nasional IDEC 2022, D03.1-D03.10.

Safytri, R., Suryatman Margana, A., & Sukamto, A. P. E. (2020). Analisis perbandingan kinerja mesin pendingin (chiller, cooling tower, dan air handling unit) sebelum dan sesudah maintenance di Transmart Buah Batu. Prosiding The 11th Industrial Research Workshop and National Seminar Bandung, 361–367.

Sajiwo, H. B., & Hariastuti, N. L. P. (2021). Analisis produktivitas menggunakan metode objective matrix (OMAX) dan fault tree analysis (FTA) di PT. Elang Jagad. Seminar Nasional Teknologi Industri Berkelanjutan I, 1(1), 292–300.

Sidik, J., Andalia, W., & Tamalika, T. (2023). Identifikasi perawatan mesin press hidrolik dengan menggunakan metode FMEA dan FTA (Studi Kasus di Bengkel Cahaya Ilahi). Jambura Industrial Review (JIREV), 2(2), 57–64. https://doi.org/10.37905/jirev.v2i2.16629

Susilo, A., Rohimat, R. I., & Husniah, H. (2020). Analisis kegagalan operasional mesin chiller dengan metoda FTA dan FMEA. Integrasi: Jurnal Ilmiah Teknik Industri, 4(2), 19. https://doi.org/10.32502/js.v4i2.2871

Yemima, O., Nohe, D. A., & Novia Nasution, Y. (2014). Penerapan peta kendali demerit dan diagram pareto pada pengontrolan kualitas produksi (Studi Kasus: Produksi Botol Sosro di PT. X Surabaya). Jurnal EKSPONENSIAL, 5(2), 197–202.

Yolanda, M., Ekawati, Y., & Noya, S. (2023). Penerapan metode fault tree analysis untuk mencegah kegagalan pada departemen interior di PT X. Jurnal Sains Dan Aplikasi Keilmuan Teknik Industri (SAKTI), 3(1), 49–58. https://doi.org/10.33479/jtiumc.v3i1.49