Analisis Penerapan Metode HIRARC Untuk Meningkatkan Keselamatan Dan Kesehatan Kerja Pada Konstruksi Saluran Kabel Tegangan Menengah (SKTM)

Muhammad Fathin Taqiyuddin; Syadzadhiya Qothrunada Zakiyayasin Nisa

doi:10.61132/venus.v2i3.311

Authors

Muhammad Fathin Taqiyuddin Universitas Pembangunan Nasional Veteran Jawa Timur
Syadzadhiya Qothrunada Zakiyayasin Nisa Universitas Pembangunan Nasional Veteran Jawa Timur

DOI:

https://doi.org/10.61132/venus.v2i3.311

Keywords:

HIRARC, MVCL Construction, Hazard Identification, Risk Assessment, Risk Control

Abstract

Electricity is a vital aspect of modern infrastructure that supports various human activities. Therefore, the increasing need for electrical energy requires good planning to ensure the availability of electrical energy in the future. The transmission system, especially the Medium Voltage Cable Line (MVCL), plays an important role in distributing electrical energy from generators to consumers. However, MVCL construction involves high-risk work, so it requires special attention to occupational health and safety (OHS). This research uses the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) method to identify and control risks in MVCL construction projects. It is hoped that the results of this research can provide recommendations for improving occupational safety and health as well as efficiency in future MVCL construction projects.

References

Andu, F. A. (2019). Kajian Pengawasan Listrik Dalam Penanggulangan Kebakaran. Jurnal Ilmiah Media Engineering, 9(1), 1–10.

AS/NZS 4360. (2004). The Australian And New Zealand Standard on Risk Management. In Nursing Management (Vol. 10, Issue 5). https://doi.org/10.7748/nm.10.5.31.s21

Aulia, L., & Hermawanto, A. R. (2020). Analisis Risiko Keselamatan Kerja Pada Bagian Pelayanan Distribusi Listrik Dengan Metode HIRARC (Studi Kasus di PT. Haleyora Power). Sistemik : Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 8(1), 20–27. https://doi.org/10.53580/sistemik.v8i1.36

Kanugrahan, T. R., & Puspita, A. D. (2022). Analisa Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. AGR UNIT ARF. 5, 106–112.

OHSAS 18001 (2007) Tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja.

Pemerintah Indonesia. (2003). Undang-undang Nomor 13 Tahun 2003 tentang Ketenagakerjaan. Jakarta.

Pasra, N., Samsurizal, S., & Fajri, M. (2022). Evaluasi Tingkat Keandalan Sistem Distribusi 20 kV Menggunakan Indeks SAIDI SAIFI. Sutet, 12(1), 31–41. https://doi.org/10.33322/sutet.v12i1.1644

Republik Indonesia. (1970). Undang-Undang Nomor 1 Tahun 1970 tentang Keselamatan Kerja. Seketariat Negara. Jakarta.

Soekiswara, T. E. F. (2020). Faktor Kecelakaan Dan Keselamatan Kerja Pada Penggunaan Crane Di Proyek Konstruksi. Jurnal Menara, 18(2), 42–50.

Zahra, S. F., & SKTMisno. (2022). Analisis Bahaya dan Penilaian Risiko Menggunakan Metode HIRARC PT. Cahaya Mekanindo Perkasa. Jurnal Sains, Teknologi Dan Industri, 20(1), 255–264. https://ejournal.uin suska.ac.id/index.php/sitekin/article/view/19762/8372