Kekuatan Statik Rangka Mesin Alat Penyortir Barang Menggunakan Software Solidworks

Authors

  • Abdul Muchlis Universitas Gunadarma
  • Achmad Risa Harfit Universitas Gunadarma

DOI:

https://doi.org/10.61132/venus.v2i4.413

Keywords:

Sorting, Freight Sorter Frame, Von misses, Displacement, Safety Factor

Abstract

The use of automation systems is needed in sorting, one of which is the sorting of objects based on the size of the object being sorted. Especially in the sorting process, there are still many industries that use conveyors that only function for one product with the same weight characteristics. Therefore, to sort the same goods with different weights, a separate conveyor is needed so that many conveyors are used. The development of a sorting machine is an important aspect in the modern automation and manufacturing industry. This research aims to design and analyze the static loading of the sorting machine frame using SOLIDWORKS software. The design method used includes detailed 3D modeling of the machine frame by considering the strength, stability and reliability of the structure. The simulation results using SOLIDWORKS software show the stress (von Mises) with a maximum value of 82.26 MPa, while the theoretical calculation result is 84 MPa. Displacement with a maximum value of 4.063 mm, while the theoretical calculation result is 1.60 mm. The safety factor is 2.38, while the theoretical calculation result is 2.43. The difference between manual calculation and simulation is 0.02% for von Mises stress, 1.5% for displacement, and 0.02% for safety factor.

References

Abdullah, M. F. Perancangan jig dan lifter untuk mengangkat exhaust system mobil BMW di PT. XYZ.

Aldy Pratama, S. (2021). Pembuatan rangka mesin pelet ikan 3 in 1 (Doctoral dissertation, DIII Teknik Mesin Politeknik Harapan Bersama).

Amin Putra, Krismadinata, & Irma Husnaini. (2013). Perancangan dan pembuatan alat pemisah buah jeruk lemon berdasarkan ukuran dengan pengendalian mikrokontroler ATMEGA. Skripsi Jurusan Teknik Elektro Universitas Negeri Padang, Padang.

Fajri, R. A. (2017). Rancang bangun penyortir barang berdasarkan berat barang menggunakan sensor load cell berbasis PLC (Doctoral dissertation).

Herdi, J., Sulaiman, & Kusuma. Tingkat laju korosi atmosferik baja konstriksi di lingkungan pabrik kelapa sawit. Aceh: Universitas Teuku Umar.

Hidayat, N. (2013). Solidworks 3D drafting and design (Edisi pertama). Bandung.

Ismawanto, A., Syarief, A., & Isworo, H. (2014). Simulasi kekuatan material pada carabiner dengan variasi geometri. Jurnal Ilmiah Teknik Mesin Unlam, 3(1), 52-57.

Metals Handbook Desk Edition (2nd ed.). ASM International.

Putra, P. P. (2014). Aplikasi sensor warna TCS230 pada sistem kendali robot line follower (Doctoral dissertation, Politeknik Negeri Sriwijaya).

Raharjo, F. A. (2020). Mahir Solidworks Simulation CAE: Seberapa amankah desain struktur yang Anda buat? Uji dan optimalkan bersama Solidworks Simulation. Deepublish.

Riki Aditya, R. A. (2019). Penerapan persediaan dalam mengoptimalisasi paper core dipengaruhi oleh quantity discount menggunakan metode Economic Order Quantity (EOQ) di PT. Swanson Plastic Indonesia (Doctoral dissertation, Universitas Islam Majapahit Mojokerto).

Rozik, M. A. (2020). Perancangan dan analisis kekuatan rangka mesin pengayak pasir menggunakan Autodesk Inventor 2019 (Doctoral dissertation, Universitas 17 Agustus 1945 Surabaya).

Wicaksono, F. R., Rusdinar, A., & Wibawa, I. P. D. (2018). Perancangan dan implementasi alat penyortir barang pada konveyor dengan pengolahan citra. Eproceedings of Engineering, 5(1).

Published

2024-07-01

How to Cite

Abdul Muchlis, & Achmad Risa Harfit. (2024). Kekuatan Statik Rangka Mesin Alat Penyortir Barang Menggunakan Software Solidworks. Venus: Jurnal Publikasi Rumpun Ilmu Teknik , 2(4), 221–231. https://doi.org/10.61132/venus.v2i4.413