Rancang Bangun Sistem Sandar Otomatis Menggunakan Arduino

Sony Gunawan; Diana Alia; Jaka Septian Kustanto

doi:10.61132/globe.v3i2.841

Authors

Sony Gunawan Politeknik Pelayaran Surabaya
Diana Alia Politeknik Pelayaran Surabaya
Jaka Septian Kustanto Politeknik Pelayaran Surabaya

DOI:

https://doi.org/10.61132/globe.v3i2.841

Keywords:

Arduino, Auto-Return, Ship

Abstract

This applied scientific work is entitled "Design of Automatic Smart Berthing System Based on Arduino". Ships are a comfortable alternative transportation. Currently, ship development is needed so that they can operate properly. During the docking process, ship accidents often occur in ports both nationally and internationally. Therefore, a better development or safety is needed that can be given to ships during the docking process. This tool uses the Arduino Nano microcontroller as the main control and an ultrasonic sensor as a distance counter to prevent accidents. This applied scientific work aims to realize and facilitate work on the ship by abandoning manual methods. Berthing is the location of the ship's mooring or security, the area around the ship where the anchor is thrown, the ship's residence, employing the ship's crew and positioning the ship in the desired place. This scientific paper uses experimental research as its research method. The use of experimental research methods in educational research will be faced with problems concerning research subjects. Experimental research is also research that is carried out intentionally by researchers by providing certain treatments to research subjects in order to create a tool or design that is expected by the researcher.

References

Alam, T. H. I., & Ermin, E. (2019). Rancang bangun prototype kapal pendeteksi dan pengambil sampah otomatis berbasis Arduino Nano. INSECT (Informatics and Security): Jurnal Teknik Informatika, 4(2), 65–70.

Arianto, B. (2021). Analisis peran buzzer media sosial dalam memperkuat kampanye petani milenial. JRK (Jurnal Riset Komunikasi), 11(2).

Arif, D. T., & Aswardi, A. (2020). Kendali kecepatan motor DC penguat terpisah berbeban berbasis Arduino. JTEV (Jurnal Teknik Elektro dan Vokasional), 6(2), 33–43.

Arifin, T. N., Pratiwi, G. F., & Janrafsasih, A. (2022). Sensor ultrasonik sebagai sensor jarak. Jurnal Tera, 2(2), 55–62.

Aru, S. S. (2018). Olah gerak kapal secara aman diperairan es di Sakhalin oleh MV Highny (Disertasi, Politeknik Ilmu Pelayaran Semarang).

Azmar, Z. B., & Perbani, N. R. C. (2016). Studi awal desain hull USV (Unmanned Surface Vehicle) untuk pengukuran batimetri di perairan tenang. Reka Geomatika, 2016(1).

Dimas, R. S. (2019). Analisa pengoperasian bow thruster pada saat manouver di MV Nusantara Sejati (Disertasi, Politeknik Ilmu Pelayaran Semarang).

Jowangkay, T. M. (2016). Simulasi sistem keamanan rumah menggunakan sensor ultrasonik HC-SR04 dengan Arduino (Disertasi, Politeknik Negeri Manado).

Kamolov, A., & Park, S. (2019). An IoT-based ship berthing method using a set of ultrasonic sensors. Sensors, 19(23), 5181. https://doi.org/10.3390/s19235181

Muhamad, R. A. N. (2021). Analisis penghambat proses berthing kapal di Pelabuhan Tanjung Priok yang di ageni PT. Tarunacipta Kencana Jakarta (Disertasi, Politeknik Ilmu Pelayaran Semarang).

Purwantomo, A. H. (2018). Mengolah gerak kapal. PIP Semarang.

Rivaldi, P. (2024). Rancang bangun sensor ultrasonik berbasis Arduino Uno sebagai alat bantu proses sandar kapal (Disertasi, Politeknik Ilmu Pelayaran Semarang).

Sitanggang, R. T. P. (2024). Analisis proses pendinginan lithium-ion baterai menggunakan media fluida aquadest dan ethylene glycol (Disertasi, Fakultas Teknik Universitas Sultan Ageng Tirtayasa).

Syukroni, M. F. (2017). Rancang bangun knowledge management system berbasis web pada Madrasah Mualimin Al-Islamiyah Uteran Geger Madiun (Disertasi, Universitas Muhammadiyah Ponorogo).

Wiguna, A. R. (2020). Analisis cara kerja sensor ultrasonic dan motor servo menggunakan mikrokontroler Arduino Uno untuk pengusir hama di sawah. OSF Preprints. https://doi.org/10.31219/osf.io/preprints

Yasmin, W. O. S. A. (2020). Inventaris perlengkapan laboratorium sistem digital menggunakan modul RF433MHz (Disertasi, Universitas Komputer Indonesia).

Yudha, P. F., & Sani, R. A. (2019). Implementasi sensor ultrasonik HC-SR04 sebagai sensor parkir mobil berbasis Arduino. Einstein e-Journal, 5(3).