Produksi Penggantung Pakaian Bentuk S 90o Aluminum, Tebal Daun Pintu 38 mm, Kapasitas 6 Biji/Jam

Muhammad Alfan Agustian; Syamsul Hadi; Helmi Dalova Jaya; Elian Bayu Ramadhan; Adek David Dwi Yuvandi

doi:10.61132/jupiter.v4i3.1401

Produksi Penggantung Pakaian Bentuk S 90o Aluminum, Tebal Daun Pintu 38 mm, Kapasitas 6 Biji/Jam

Authors

Muhammad Alfan Agustian Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang
Helmi Dalova Jaya Politeknik Negeri Malang
Elian Bayu Ramadhan Politeknik Negeri Malang
Adek David Dwi Yuvandi Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/jupiter.v4i3.1401

Keywords:

90o S-shape, Aluminium Plate, Bending, Clothes Hanger, Press Tool

Abstract

Damage to door panels caused by drilling, nailing, or screwing clothes hangers onto doors, as well as the insufficient strength of conventional hangers, remains a common problem in residential and public facilities. This production project aimed to develop a durable S-shaped 90° clothes hanger made of aluminum that can be attached directly to the edge of a door with a thickness of 38 mm without causing structural damage. The production method consisted of several stages, including designing the S-shaped 90° hanger, cutting an aluminum plate measuring 210 × 20 × 3 mm, forming semicircular ends using a press tool to reduce the plate length from 21 cm to 20 cm, filing sharp edges, marking bending lines at distances of 3 cm and 7 cm from both ends of the plate in opposite directions, bending the ends according to the markings, and applying paint or anodizing finishes based on customer preferences. The final stage involved quality and dimensional inspections to ensure product conformity. The resulting product was an aluminum S-shaped 90° clothes hanger capable of being securely hung on the upper edge of a 38 mm thick door. The production cost was approximately IDR 12,000 per unit, with an average manufacturing time of 10 minutes per unit. The hanger was capable of supporting loads of up to 7 kg and could be easily installed, removed, and relocated without damaging the door surface.

References

Endayanti, M., Laia, D., Putra, E., Laia, J., Ndruru, F., Halawa, P. E., Laia, F., Ginting, Y. T., & Pasaribu, H. (2024). Effect of plate thickness on springback in V-bending of aluminium sheets. Impression: Jurnal Teknologi dan Informasi, 3(1), 1–10. https://doi.org/10.59086/jti.v3i1.974

Hadi, S., Hardjito, A., Wicaksono, H., Firmansyah, H. I., Amrullah, R. N., Permana, R. W., Takwim, R. N. A., Dana, B. C. M., Mustafa, M. S., & Kusmoko, A. (2025). Minimalizing spring back of metal plates bending effect by squishing with press tool. Engineering Solid Mechanics, 13(4), 373–380. https://doi.org/10.5267/j.esm.2025.8.001

Kella, C. K., & Mallick, P. K. (2022). Springback behavior of aluminum/polypropylene/aluminum sandwich laminates. Journal of Manufacturing and Materials Processing, 6(152). https://doi.org/10.3390/jmmp6060152

Khoryanton, A., Purnomo, A., Putri, F. T., & Nashrullah, M. (2021). Penerapan teknologi mesin bending guna mempercepat proses bending pada produk gantungan ayam di PT Todda Perkasa Semarang. Jurnal Rekayasa Mesin, 16(3), 417–424. https://doi.org/10.32497/jrm.v16i3.3059

Manullang, R. M., & Gusniar, I. N. (2022). Proses bending plat pada pembuatan produk round filter di PT Inovasi Pro Filter Indonesia. Jurnal Pendidikan Teknik Mesin Undiksha, 10(2), 166–173. https://doi.org/10.23887/jptm.v10i2.51315

Mufarrih, Amrullah, A. M., Amrullah, U. S., & Emzain, Z. F. (2021). Homemade hanger tool untuk meningkatkan produksi UKM gantungan baju di Desa Sukodono Kabupaten Tulungagung. Panrannuangku Jurnal Pengabdian Masyarakat, 2(1), 19–24. https://doi.org/10.35877/panrannuangku561

Nugroho, S. Y., Muklisin, & Listyanto, R. E. (2026). Optimasi kualitas proses bending untuk mengurangi deformasi produk menggunakan metode seven tools dan PDCA di industri manufaktur. JUTIN: Jurnal Teknik Industri Terintegrasi, 9(2), 1359–1373. https://doi.org/10.31004/jutin.v9i2.55075

Nursetya, A. E. (2020). Desain gantungan pakaian susun. Jurnal Narada, 7(3), 439–456. https://doi.org/10.2241/narada.2020.v7.i3.010

Pramudya, A. S., & Nugraha, A. (2024). Improving the bending quality of SUS 201 1B material by optimization of the processing parameters using Taguchi method. Jurnal Material dan Proses Manufaktur, 8(2), 110–119. https://doi.org/10.18196/jmpm.v8i2.23439

Purwatono, Erizon, N., Helmi, N., & Akhbar, M. (2020). Effect of spring back on formation process of sheet metal bending plates. Teknomekanik, 3(1), 28–35. https://doi.org/10.24036/tm.v3i1.5872

Rahardja, I., Rahdiana, N., Mulyadi, D., & Sumanto. (2021). Analisis pengaruh radius bending pada proses bending menggunakan pelat SPCC-SD terhadap perubahan struktur mikro. Jurnal Teknik Mesin Mechanical Xplore, 1(1), 1–10. https://doi.org/10.36805/jtmmx.v1i1.1279

Saputra, E., Carli, Sunarto, & Sai'in, A. (2024). Pengembangan desain teknologi mesin roller bending untuk besi square hollow. Jurnal Rekayasa Mesin, 19(3), 469–478. https://doi.org/10.32497/jrm.v19i3.6045

Shangra, K. D., Arifin, F., & Arnoldi, D. (2025). Analisis pengaruh sudut punch terhadap proses V-bending. Machinery Jurnal Teknologi Terapan, 6(2), 132–138. https://doi.org/10.5281/zenodo.17293847

Sudarmono, Kurnia, H., Wahyuni, A. D., Adistyani, N., & Sulaeman, A. A. (2023). Penggunaan material logam di berbagai industri manufaktur Indonesia: Sistematik kajian literatur. Jurnal Industry Xplore, 8(1), 220–228. https://doi.org/10.36805/teknikindustri.v8i1.5098

Sukarman, Anwar, C., Rahdiana, N., Khoirudin, & Ramadhan, A. I. (2020). Analisis pengaruh radius dies terhadap springback logam lembaran stainless-steel pada proses bending hidrolik V-die. Jurnal Teknologi, 12(2), 123–132. https://doi.org/10.24853/jurtek.12.2.123-132

Suyuti, M. A. (2020). Rancang bangun press tool untuk alat bending pelat tipe die-V air bending. Machine: Jurnal Teknik Mesin, 6(1), 39–45. https://doi.org/10.33019/jm.v6i1.1396

Wibowo, H., & Hidayat, H. N. (2025). Design and manufacture of automatic sheet metal bending machine tools in the press brake section. Journal of Applied Mechanical Engineering and Innovation, 1(1), 8–14. https://doi.org/10.21831/jamei.v1i1.837

Yanis, M., Gunawan, & Pratama, R. W. (2021). Perancangan dan pembuatan mesin bending dan notching. Jurnal Rekayasa Mesin, 21(1), 33–38. https://doi.org/10.36706/jrm.v21i1.72

Yazid, S., Ginting, R., & Panjaitan, N. (2024). Integration of design for manufacture and assembly with product design in product design improvement: A systematic literature review. Jurnal Sistem Teknik Industri, 26(2), 128–136. https://doi.org/10.32734/jsti.v26i2.13643

Yunus, M., & Pranandita, N. (2021). Rancang bangun alat pembengkok kawat metal jig. Jurnal Mesin Nusantara, 4(1), 11–20. https://doi.org/10.29407/jmn.v4i1.16017

Downloads

Published

2026-05-31

How to Cite

Muhammad Alfan Agustian, Syamsul Hadi, Helmi Dalova Jaya, Elian Bayu Ramadhan, & Adek David Dwi Yuvandi. (2026). Produksi Penggantung Pakaian Bentuk S 90o Aluminum, Tebal Daun Pintu 38 mm, Kapasitas 6 Biji/Jam. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro Dan Informatika, 4(3), 145–153. https://doi.org/10.61132/jupiter.v4i3.1401