Analisis Produktivitas dan Efisiensi Mobile Crane dalam Produksi Tiang Pancang: Studi kasus di PT. Adhi Beton Kabupaten Purwakarta

Assyfa Hermalia Puteri; Ananda Edo Pratama; Indra Ginanjar; Defagy Faudril; Moch Paridzi Almauludy; Salva Handika; Rifan Rizky Sabila; Deny Ernawan

doi:10.61132/konstruksi.v4i1.1335

Authors

Assyfa Hermalia Puteri Universitas Subang
Ananda Edo Pratama Universitas Subang
Indra Ginanjar Universitas Subang
Defagy Faudril Universitas Subang
Moch Paridzi Almauludy Universitas Subang
Salva Handika Universitas Subang
Rifan Rizky Sabila Universitas Subang
Deny Ernawan Universitas Subang

DOI:

https://doi.org/10.61132/konstruksi.v4i1.1335

Keywords:

Heavy Equipment Productivity, Mobile Crane, Pile Production, PT. Adhi Beton Purwakarta, Work Efficiency

Abstract

Heavy equipment effectively plays a key role in ensuring productivity and efficiency in the precast concrete industry of spun pile concrete at PT Adhi Beton Purwakarta. One of the heavy equipment that plays an important role is the mobile crane, especially for moving large concrete components. In this study, field data was processed by analyzing the productivity and efficiency of the Tadano GR-500EXL type mobile crane with a capacity of 50 tons. Current problems are high idle time, lack of operational synchronization, and suboptimal utilization of technological features on the crane unit. The results show that spun pile concrete weighing 6.78 tons based on the analysis of heavy equipment productivity is 40.68 tons/hour with the number of mobile crane heavy equipment needed as many as 2 units, and the efficiency for crane heavy equipment reaches around 68%. The amount of productivity and needs are to support the target of achieving precast concrete production, especially spun pile concrete. Thus, it is expected that the amount of productivity and the number of mobile crane heavy equipment needs are optimal to support production.

References

Al-Hussein, M., Alkass, S., & Moselhi, O. (2001). An algorithm for mobile crane selection and location on construction sites. Journal Construction Innovation, 1(2), 91-105. https://doi.org/10.1108/14714170110814532

Ernawan, D., Ariza, N. H., Prayoga, S., & Mursyid, A. (2025). Optimalisasi produktivitas crawler crane pada pekerjaan pengangkatan precast beton tiang pancang 35 x 35 CM PT. Wijaya Karya Beton Tbk. Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil, 3(3), 288-298. https://doi.org/10.61132/konstruksi.v3i3.985

Guo, H., Zhou, Y., Pan, Z., Zhang, Z., Yu, Y., & Li, Y. (2022). Automated selection and localization of mobile cranes in construction planning. Buildings, 12, 1-19. https://doi.org/10.3390/buildings12050580

Gusthia, I. (2023). Mobile crane: Merevolusi konstruksi dengan keserbagunaan dan mobilitas. Https://Www.Garudasystrain.Co.Id/Mobile-Crane-Merevolusi-Konstruksi-Dengan-Keserbagunaan-Dan-Mobilitas/, Diakses Tanggal 25 Juli 2025, 1-9.

Hozjan, M., & Klansek, U. (2023). Optimal positioning of mobile cranes on construction sites using nonlinear programming with discontinuous derivatives. Sustainability, 15, 1-18. https://doi.org/10.3390/su152416889

Kadriadia, Wirakusuma, K. W., Opub, A. S., & Alfiana, M. (2024). Analisis crane portable dengan kemampuan angkat 1 ton. Jurnal Ilmiah Teknik Mesin, 05(02), 52-61. https://doi.org/10.51510/sinergipolmed.v5i2.1652

Kana, P. H. W., Dwipa, I. G. A. S. N., & Bintana, I. B. (2023). Efektifitas penggunaan mobile crane pada gedung dekanat FISIP Universitas Udayana. Seminar Nasional, 2, 165-171.

Khan, A. U., Huang, L., Onstein, E., & Liu, Y. (2022). Overview of emerging technologies for improving the performance of heavy-duty construction machines. IEEE Access, 10(1), 103315-103336. https://doi.org/10.1109/ACCESS.2022.3209818

Lei, Z., Taghaddos, H., Hermann, U., & Al-Hussein, M. (2013). A methodology for mobile crane lift path checking in heavy industrial projects. Automation in Construction, 31(1), 41-53. https://doi.org/10.1016/j.autcon.2012.11.042

Milosevic, I., Stojanovic, A., Nikolic, D., Mihajlovic, I., Brkic, A., Perisic, M., & Spasojevic-Brkic, V. (2025). Occupational health and safety performance in a changing mining environment: Identification of critical factors. Safety Science, 184(1), 1-12.

Molaei, A., Kolu, A., Lahtinen, K., & Geimer, M. (2023). Automation in construction automatic estimation of excavator actual and relative cycle times in loading operations. Automation in Construction, 156(September), 105080. https://doi.org/10.1016/j.autcon.2023.105080

Motycka, V., Gasparík, J., Pribyl, O., Sterba, M., Horinkova, D., & Kantova, R. (2022). Effective use of tower cranes over time in the selected construction process. Buildings, 12, 1-21. https://doi.org/10.3390/buildings12040436

Musridhoi, R. Z., & Nugroho, M. S. (2025). Analysis of mobile crane and crawler crane lift capacity in steel box girder type bridge construction. Journal of Applied Civil Engineering and Practices Online, 1(1), 51-65.

Nurdiansyah, H. F. (2019). Analisis pemilihan alat berat material hoist dan mobile crane pada pekerjaan rangka atap baja proyek pembangunan. In Universitas Islam Indonesia.

Rasyid, M. A., Hadi, A. K., & Supardi, S. (2025). Kajian produktivitas alat berat pada proyek pembangunan gedung Kantor PKK, Dekranasda dan UMKM Center Kota Makassar. JUTIN: Jurnal Teknik Industri Terintegrasi, 8(1), 840-850. https://doi.org/10.31004/jutin.v8i1.40964

Safitri, T. D. (2025). Produktivitas tower crane pada proyek pembangunan apartemen Elevee Penthouses and Residences. In Universitas Sultan Ageng Tirtayasa.