Pemanfaatan Limbah Serat Plastik PET Terhadap Kuat Tekan Beton
DOI:
https://doi.org/10.61132/konstruksi.v2i2.207Keywords:
PET Plastic, Compressive Strength, ConcreteAbstract
The public greatly anticipates using plastic trash to increase the compressive strength of concrete blocks so they can change form and stop polluting the environment. The purpose of this study is to ascertain how adding PET plastic trash to concrete affects its compressive strengths. Experimental techniques were used in this investigation, including in-lab tests. Afterwards, testing processes in the lab were used to assess the research results. The compressive strength of normal concrete has a value of 25 MPa which reaches the design compressive strength value, while the concrete variation of 1% PET plastic is 23 MPa, 2% PET plastic is 21 MPa, and 3% PET plastic is 19 MPa which does not reach the compressive strength value. plan. This shows that PET plastic waste mixed with concrete results in a decrease in the compressive strength of concrete from normal concrete.
References
A. Ahmad. “Pengaruh Penambahan Serat Plastik PET (Polyethylene Terepthalate) Pada Beton Normal Terhadap Kuat Lentur,” Skripsi. Universitas Negeri Jember, Jember, Indonesia. 2017.
A. Setiawan., A. A. Masagala. “Pengaruh Penambahan Serat Limbah Plastik Polyethylene Terephthalate (PET) Dengan Persentase 0, 8%, 1%, Dan 1, 2% Pada Beton Bertulang Terhadap Kuat Lentur,” Doctoral dissertation, University Technology Yogyakarta, Yogyakarta, Indonesia. Mei 2019.
Badan Standarisasi Nasional. (2011). “SNI 1974-2011: Cara Uji Kuat Tekan Beton dengan Benda Uji Silinder,” Jakarta: BSN
D. R. Basri. “Pengaruh Limbah Plastik Botol (Leleh) Sebagai Material Tambah Terhadap Kuat Lentur Beton,” Racic: Rab Construction Research, Vol. 4, No. 2, pp. 66-77. 2019. Tersedia: http://jurnal.univrab.ac.id/index.php/racic/article/view/1084
F. Maulidah. “Analisa Campuran Beton Mutu Tinggi Dengan Polyethylene Terephtalete (PET) Sebagai Pengganti Agregat,” Doctoral dissertation, Universitas Islam Majapahit, Mojokerto, Indonesia. 2021.
I. I. Saputra. (2019) “Analisa Pengaruh Durasi dan Urutan Campuran Agregat Terhadap Kuat Tekan Beton,” Doctoral dissertation, Universitas Medan Area, Medan, Indonesia. Oktober 2019.
J. Jasman. (2022). Pengaruh Penambahan Sabut Kelapa Terhadap Kuat Tekan Beton. Jurnal Karajata Engineering, Vol. 2, No. 1, pp. 53-57. Juni 2022. Tersedia: https://doi.org/10.31850/karajata.v2i1.1604
L. Prasetio. “Pengaruh Variasi Gradasi Limbah Beton Sebagai Bahan Pengganti Agregat Terhadap Kuat Tekan Beton,” In Prosiding Sentra (Seminar Teknologi Dan Rekayasa), no.4, pp. 52-55. Januari 2019. Tersedia: http://doi.org/10.22219/sentra.v0i4.2422.
M. P. Putra., H. Widarto. “Analisis Pemanfaatan Plastik Polystyrene (Ps) Sebagai Bahan Tambahan Aspal AC-WC dan AC-BC Dengan Metode Marshall,” Jurnal Karajata Engineering, vol.3, no.2, pp.7-11. Juni 2023. Tersedia: https://doi.org/10.31850/karajata.v3i2.2315
N. A. Azis. “Perilaku Mekanik Beton Berbahan Limbah Plastik PET Sebagai Material Konstruksi,” Doctoral dissertation, Universitas Hasanuddin, Makassar, Indonesia. Desember 2020.
N. Handayani., A. Faradila., I. Juari., D. Larasati. “Perilaku Kuat Tekan Beton Normal Terhadap Penambahan Serat Botol Plastik Jenis PET,” Borneo Engineering: Jurnal Teknik Sipil, vol.5, no.1, pp.52-63. April 2021. Tersedia: https://doi.org/10.35334/be.v5i1.1594
R. Apriliya., S. B. Bahar., M. Sayfullah. “Pengaruh Kuat Tekan Beton dengan Menggunakan Bahan Tambah Botol Plastik Kemasan Air Mineral Jenis Polyethylene Terephthalate (PET),” SCEJ (Shell Civil Engineering Journal), vol.6, no.1, pp.23-29. Juni 2021. Tersedia: https://doi.org/10.35326/scej.v6i1.1546
Y. I. Mahendra., E. Gardjito., A. Ridwan., H. Wicaksono. “Meningkatkan Kuat Tekan Beton Fc’16, 60 MPa menggunakan Fly Ash dan Arang Batok Kelapa,” Jurnal Manajemen Teknologi & Teknik Sipil,. vol. 4, no. 1, pp. 1-13. Juni 2021. Tersedia: http://dx.doi.org/10.30737/jurmateks.v4i1.1641
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
