Analisis Resiko Pekerjaan Dengan Metode Hazard Identification Risk Assesment Di Perusahaan Tambang Batu Bara

Studi Kasus PT Saptaindra Sejati

Authors

  • Yoga Pribadi Putra Universitas Sahid Surakarta
  • Erna Indriastiningsih Universitas Sahid Surakarta
  • Anita Oktaviana Trisna Devi Universitas Sahid Surakarta

DOI:

https://doi.org/10.61132/manufaktur.v2i1.201

Keywords:

HIRADC, Coal Mining, Work Accidents

Abstract

Data from the Social Security Administering Agency (BPJS) for Employment in 2021 - 2022 recorded 499,604 cases of work accidents, then the Circular Letter of the Chief Mining Inspector number: B- 6234/MB.07/DBT.KP/2023 dated 9 October 2023 regarding Increasing Vigilance in Efforts Preventing Mining Accidents and Improving Mining Safety Performance, throughout 2023, 46.9% of accidents will result in deaths due to interaction activities on mine roads. Based on preliminary studies at PT. The true Saptaindra Site SERA in 2023 found that the number of property damage accidents (equipment damage) was 11 cases and near misses were 4 cases. The aim of this research is to identify risks that can occur both in terms of humans, the environment and operational processes, then be able to analyze the level of risk and provide recommendations for controlling dangerous risks to minimize the potential for work accidents at the PT Saptaindra Sejati Site SERA. This research uses HIRA (Hazzard Identification Risk Assessment) method with the main focus being able to identify potential hazards through calculating the level of opportunity (Likelihood) and level of severity (Saverity) in order to obtain the level of risk using a risk matrix. And then control is carried out according to the work safety hierarchy, namely elimination, substitution, engineering, administration and PPE (personal protective equipment). The results of this research show that after controlling jobs with a medium risk level, there are 3 jobs including Topsoil removal, Over burden removal and Coal getting and less than 9 according to table 2.3 Risk Matrix and jobs with a low risk level. risk), namely 3 jobs including Land clearing, Drill and blast and Mine water pumping work in the sump.

 

 

References

Afandi, M., Anggraeni, S. K., & Mariawati, A. S. (2015). Manajemen Risiko K3 Menggunakan Pendekatan HIRARC (Hazard Identification, Risk Assessment and Risk Control) Guna Mengidentifikasi Potensi Hazard. Vol. 3, No. 2, Juli 2015, 1-6.

Nurrohim, M. H. (2011). Analisa Penerapan HIRADC pada Proses Kerja Over Burden Removal PT. Cipta Kridatama Job Site Multi Harapan Utama Project Tenggarong Kalimantan Timur. Surakarta: Fakultas Kedokteran Universitas Sebelas Maret Surakarta.

Pamungkas, G. P. (2021). Manajemen Risiko Bahaya Berbasis HIRADC (Hazard Identification, Risk Assessment, and Determine Control) pada Pekerjaan Bore Pile (Studi Kasus: Proyek Gedung Sembilan Lantai Universitas Alma Ata Yogyakarta). Yogyakarta: Fakultas Teknik Sipil dan Perencanaan Universitas Islam Indonesia.

Downloads

Published

2024-02-06

How to Cite

Yoga Pribadi Putra, Erna Indriastiningsih, & Anita Oktaviana Trisna Devi. (2024). Analisis Resiko Pekerjaan Dengan Metode Hazard Identification Risk Assesment Di Perusahaan Tambang Batu Bara : Studi Kasus PT Saptaindra Sejati. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 2(1), 86–103. https://doi.org/10.61132/manufaktur.v2i1.201