Simulasi Optimasi Green Energy Metode Photovoltaick Pada Gedung Rektorat Universitas Bina Bangsa Serang Banten

Bambang Setyo Panulisan; Dedy Khaerudin; Yolla Sukma Handayani; Siswanto Siswanto

doi:10.61132/jupiter.v2i3.292

Authors

Bambang Setyo Panulisan Universitas Bina Bangsa,Serang
Dedy Khaerudin Universitas Bina Bangsa,Serang
Yolla Sukma Handayani Universitas Bina Bangsa,Serang
Siswanto Siswanto Universitas Serang Raya

DOI:

https://doi.org/10.61132/jupiter.v2i3.292

Keywords:

electricity, walls, generators, photovoltaics.

Abstract

The simulation in this research investigates the possibility of using the walls of the rectorate building on the Bina Bangsa campus to install a wall area solar energy system. The building walls are simulated, becoming a representation of the walls of other buildings. PLTS electricity calculations use an interconnected Solar Power Plant [PLTS] system. Research shows that the building has a wall area of 10,353 m2 which can be used to install solar panels. The total electrical power produced in the area is 2030 kWp or 2.03 MWp. The power is divided into four, namely 630 kWp east of the roof, 535 kWp northwest, 668 kWp southwest and 553 kWp southeast.

References

Benatiallah, A. et al., 2007. A simulation model for sizing PV installations. Desalination, 209(1), pp.97–101.

Bergamasco, L. & Asinari, P., 2011. Scalable methodology for the photovoltaic solar energy potential assessment based on available roof surface area: Application to Piedmont Region (Italy). Solar Energy, 85(5), pp.1041–1055.

Kandpal T.C. and Garg H.P., 2003. Financial evaluation of renewable energy technologies,

Ko, L. et al., 2015. Evaluation of the development potential of rooftop solar photovoltaic in Taiwan. Renewable Energy, 76, pp.582–595.

Kuchler, S., 2013. Solar Energy Assesment Based on Weather Station Data for Direct Site Monitoring in Indonesia. Dalarna University.

Marcel S. & Tomáš C., 2012. New Web-Based Service Offering Solar Radiation Data and PV Simulation Tools for Europe, North Africa and Middle East. In Eurosun.

Ord????ez, J. et al., 2010. Analysis of the photovoltaic solar energy capacity of residential rooftops in Andalusia (Spain). Renewable and Sustainable Energy Reviews, 14(7), pp.2122–2130.

Orioli, A. & Di Gangi, A., 2014. Review of the energy and economic parameters involved in the effectiveness of grid-connected PV systems installed in multi-storey buildings. Applied Energy, 113, pp.955–969. Available at: http://dx.doi.org/10.1016/j.apenergy.2013.08.014.

Redweik, P., Catita, C. & Brito, M., 2013. Solar energy potential on roofs and facades in an urban landscape. Solar Energy, 97, pp.332–341. SolarGis, SolarGis PVPlanner. Available at: http://solargis.info/pvplanner [Accessed June 20, 2006].

Tarigan, E., Djuwari & Kartikasari, F.D., 2015. Techno-economic Simulation of a Grid- connected PV System Design as Specifically Applied to Residential in Surabaya, Indonesia. Energy Procedia, 65, pp.90–99.

Vardimon, R., 2011. Assessment of the potential for distributed photovoltaic electricity production in Israel. Renewable Energy, 36(2), pp.591–594.

Wiginton, L.K., Nguyen, H.T. & Pearce, J.M., 2010. Quantifying rooftop solar photovoltaic potential for regional renewable energy policy. Computers, Environment and Urban Systems, 34(4), pp.345–357.