Kajian Produksi Kunci Penahan Pulley Transmisi Sepeda Motor Matik

Mochammad Habibi; Syamsul Hadi; Andah Lugas Dhinata; Tambah Sutrisno

doi:10.61132/globe.v3i4.1257

Kajian Produksi Kunci Penahan Pulley Transmisi Sepeda Motor Matik

Authors

Mochammad Habibi Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang
Andah Lugas Dhinata Politeknik Negeri Malang
Tambah Sutrisno Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/globe.v3i4.1257

Keywords:

Automatic Transmission, Key Production, Special Key, Stainless Steel, Y-Shaped Tool

Abstract

The problem lies in the difficulty of locking the pulley retainer on automatic motorcycle transmissions without using a special Y-shaped key. The purpose of the study is to obtain a special pulley retainer lock product on automatic motorcycle transmissions that can be adjusted the distance between the two retaining pins through adjusting bolts with easy and effective locking steps. The study method includes the design of the pulley retainer lock component formation, the selection of stainless steel pulley retainer lock materials, the production of pulley retainer lock components through flat and curved forging, turning the handle, forming a Y-shaped lever pair plate, drilling 2 holes at the ends of the lever, drilling the Y-shaped auxiliary tool opening and closing pins, and drilling the Y-shaped auxiliary tool opening distance adjustment bolts, assembling the components that form the pulley retainer lock, and testing the use of the pulley retainer lock. The production results are in the form of a special pulley archery key with a total length of 300 mm, the maximum opening distance on the axis of 2 pens is 110 mm, the length of 2 pen tips is 7 mm with a total pen length of 30 mm, and one diameter is 9 mm with a total pen length of 30 mm, the adjusting bolt for the opening angle of the pulley retaining key measures M6x20 mm, and the diameter of the Y-shaped tool rivet pen used is 6 mm.

References

Dyo, G., Yasa, A., Wiratmaja, I. G., & Widayana, G. (2025). Peningkatan Unjuk Kerja Sepeda Motor Sistem Transmisi CVT Dengan Variasi Kedalaman Clutch Housing Knurling. 8(1), 21–24.

Junara, R. A., & Estriyanto, Y. (2023). Care for Mechanics : Development of Motorcycle Workbench Based on ADDIE Model to Reduce Musculoskeletal Disorders. 12(2), 533–544.

Manualbook, S. (2025). Service Manual Kymco X-Town 300 ABS, Kwang Yang Motor, Quality Technology Dept. Education Secton, 1-271..

Nurwanto, A. D., & Hadi, S. (2025). Analisis Sudut Pulley dan Berat Rol Transmisi terhadap Torsi Sepeda Motor Matic 150 Cm 3 Politeknik Negeri Malang , Indonesia. September.

Prasojo, A., Nurhadiyanto, D., & Kassymova, G. K. (2022). Tool Design for Reducing Excessive Transportation in a Textile Industry : Case Study in a Textile Company in Indonesia. 3(1), 1–19.

Pratama, F. N., & Prasetiyo, A. B. (2022). Pengaruh Waktu Temper terhadap Mikrostruktur dan Sifat Mekanis pada Baja Karbon. Cendekia Mekanika, 3(2), 92–112.https://journal.itny.ac.id/index.php/cendekia/article/view/3159?utm_source=chatgpt.com

Prawira, Y., Ishak, A., & Anizar, A. (2024). A Review of Literature on Lean Manufacturing Tools and Implementation Based on Case Studies. 1, 11–21. https://doi.org/10.32734/jsti.v26i1.11489

Riantama, M. D., & Solikin, M. (2024). Design and Development of a Special Service Tool for Front Brake Caliper Sliding Extractor in Vehicles. JAMAT, 1(1), 1–10. https://doi.org/10.21831/jamat.v1i1.810

Schiller, M., Frohn-sörensen, P., Schreiber, F., Morez, D., & Manns, M. (2024). Smart design and additive manufacturing of bending tools to improve production flexibility. Manufacturing Letters, 41, 91–102. https://doi.org/10.1016/j.mfglet.2024.09.013

Sidiq, M. F., Galuh, R. W., Royan, H., H, O. H., & Luthfianto, S. (2022). Perlakuan Panas Bertingkat sebagai Upaya Meningkatkan Kekuatan Mekanik Baja Karbon Rendah. 11(1), 117–124.

Singh, T. (2025). Design optimization of tool holding systems for high- speed machining. International Journal of Machine Tools Maintenance and Engineering, 6(1), 53–58. https://doi.org/10.22271/27074544.2025.v6.i1a.55

Setiawan, A. & Pamungkas, B.Y. (2023). Pengaruh Temperatur dan Holding Time dalam Proses Tempering terhadap Sifat Mekanik Pipa Low Carbon Steel Low Alloy Grade X65Q. Journal of Metallurgical Engineering and Processing Technology, 3(7), 53-62. https://jurnal.upnyk.ac.id/index.php/jmept/article/view/6538/4505

Septian R.S. (2024). Perancangan Driven Pulley Puller sebagai Alat Bantu Pemasangan V-Belt pada Sistem Transmisi Motor Vario 125. Repository, Lapoaran Akhir Studi, Program Studi D3-teknik Mesin, Politeknik Negeri Jakarta. https://repository.pnj.ac.id/id/eprint/23105/

Supriyatna, D., & Haryana, J. (2024). Analisis Troubleshooting pada CVT

( Continuously Variable Transmission ) Sepeda Motor Vario 125. Jurnal Rekayasa Energi dan Mekanika, 4(2), 90-95.

Suriaman, I., Makki, M. Al, & Anwar, C. (2023). ANALISA DISTRIBUSI KEKERASAN KOMPONEN MOVABLE PULLEY DRIVEN ( MPDN ) PADA TRANSMISI KENDARAAN. 14(2), 433–445. https://doi.org/10.21776/jrm.v14i2.1221

Wijaya, D. K., Hartono, B. J. R., & Izzhati, D. N. (2024). Optimizing product design and development of engine carbon cleaning maintenance tools using reverse engineering and VDI 2222 methods. 17(1).

Downloads

Published

2025-11-30

How to Cite

Mochammad Habibi, Syamsul Hadi, Andah Lugas Dhinata, & Tambah Sutrisno. (2025). Kajian Produksi Kunci Penahan Pulley Transmisi Sepeda Motor Matik. Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan, 3(4), 114–121. https://doi.org/10.61132/globe.v3i4.1257