Fabrikasi Engsel Pintu Pagar Baja Panjang 250mm, Lebar 80mm, Tinggi 100mm, Kapasitas 0,7 Set/Jam

Muhammad Afin Khairullah; Syamsul Hadi; Laldy Agum Sartyo; Dafa Ahmad Amrizal; Rizky Khairi Sakha

doi:10.61132/globe.v4i2.1408

Authors

Muhammad Afin Khairullah Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang
Laldy Agum Sartyo Politeknik Negeri Malang
Dafa Ahmad Amrizal Politeknik Negeri Malang
Rizky Khairi Sakha Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/globe.v4i2.1408

Keywords:

AISI 1020 Steel, Folding Doors, Gate Hinges, Hinge Fabrication, M10 Bolts for Welded Joints

Abstract

Broken or deformed hinges due to the inability to withstand the load of the folding gate door are the problems faced. The purpose of fabrication is to obtain folding gate door hinges from AISI 1020 steel with dimensions of 250x80x3 mm, and a height of 100 mm. The fabrication method includes: design of folding gate door hinges with dimensions of 250x80x3 mm, and a height of 100 mm; cutting 2 sheets of AISI 1020 steel measuring 250x80x3 mm; forging to form a circle with a diameter of 11 mm on the 80 mm wide side; drilling 4 holes with a diameter of 9 mm at the position according to the design; making a hinge shaft from an M10 bolt whose head and thread are connected with a connecting rod to a length of 175 mm; assembling 2 pieces of hinges with a hinge shaft; and quality-dimension-packaging inspection. The fabrication results are a pair of folding gate door hinges made of AISI 1020 steel with dimensions of 250x80x3 mm, and a height of 100 mm with an M10 bolt shaft of 175 mm in length with a production cost of IDR 48,000/unit, and a process duration of 88 minutes/unit which implies that the hinges are ready to be welded to the gate with a maximum load of 50 kg and painted before use.

References

Allwood, J. M., Childs, T. H. C., Clare, A. T., Silva, A. K. M. D., Dhokia, V., Hutchings, I. M., Leach, R. K., Leal-Ayala, D. R., Lowth, S., Majewski, C. E., Marzano, A., Mehnen, J., Nassehi, A., Ozturk, E., Raffles, M. H., Roy, R., Shyha, I., & Turner, S. (2016). Manufacturing at double the speed. Journal of Materials Processing Technology, 229, 729–757. https://doi.org/10.1016/j.jmatprotec.2015.10.028

Ammar, H. R., Galyon, G. T., & Samuel, A. M. (2021). Influence of low carbon steel properties on weldability and structural performance. Metals, 11(4), 563. https://doi.org/10.3390/met11040563

Antonnius, A., Afdal, A., Mukhnizar, M., Abu, R., & Azman, A. (2022). Perencanaan mesin tempa logam dengan sistem forging hammer. Jurnal Teknik, Komputer, Agroteknologi dan Sains, 1(2), 163–174. https://doi.org/10.56248/marostek.v1i2.29

Bucko, O., Karkula, M., & Weiszer, M. (2020). Improving production efficiency by implementing lean tools in welding processes. Applied Sciences, 10(21), 7686. https://doi.org/10.3390/app10217686

Deshpande, A. S. (2019). Total quality management and concurrent engineering for manufacturing performance improvement. International Journal of Quality & Reliability Management, 36(8), 1358–1374. https://doi.org/10.1108/IJQRM-05-2018-0124

Escobar, C. A., McGovern, M. E., & Morales-Menendez, R. (2021). Quality 4.0: A review and framework for future research in manufacturing systems. Applied Sciences, 11(15), 6843. https://doi.org/10.3390/app11156843

Faria, J. A., Tortorella, G. L., & Cauchick-Miguel, P. A. (2019). Integrating process data and cost of quality to support manufacturing inspection decisions. International Journal of Production Economics, 214, 208–220. https://doi.org/10.1016/j.ijpe.2019.03.016

Gardner, M. (2020). Cycle time reduction and manufacturing system effectiveness: A review of industrial applications. Procedia Manufacturing, 51, 1387–1394. https://doi.org/10.1016/j.promfg.2020.10.193

Groche, P., Liewald, M., Bergs, T., Behrens, B.-A., Briesenick, D., Müller, M., Niemietz, P., Kubik, C., & Müller, F. (2022). Perspectives on data-driven models and its potentials in metal forming and blanking technologies. Production Engineering, 16(5), 607–625. https://doi.org/10.1007/s11740-022-01115-0

Islam, M. H., Chavez, Z., Birkie, S. E., & Bellgran, M. (2022). Enablers in the production system design process impacting operational performance. Production & Manufacturing Research, 10(1), 257–280. https://doi.org/10.1080/21693277.2022.2076753

Klocke, F., Stauder, J., Mattfeld, P., & Müller, J. (2016). Modeling of manufacturing technologies during ramp-up. Procedia CIRP, 51, 122–127. https://doi.org/10.1016/j.procir.2016.05.098

Leiber, D., & Reinhart, G. (2022). Economic efficiency of automated manufacturing systems design. Procedia CIRP, 112, 68–72. https://doi.org/10.1016/j.procir.2022.09.040

Li, Y., Wang, X., & Zhang, H. (2021). Lead time reduction in manufacturing systems using process optimization techniques. Journal of Manufacturing Systems, 59, 209–219. https://doi.org/10.1016/j.jmsy.2020.09.007

Martínez-Olvera, C. (2022). The role of manufacturing efficiency in the achievement of sustainable mass customization 4.0. Production & Manufacturing Research, 10(1), 132–159. https://doi.org/10.1080/21693277.2022.2064360

Pfeiffer, A., Gyulai, D., Kádár, B., & Monostori, L. (2016). Manufacturing lead time estimation with the combination of simulation and statistical learning methods. Procedia CIRP, 41, 75–80. https://doi.org/10.1016/j.procir.2015.12.018

Rahman, M. M., & Khan, M. A. (2021). Cycle time optimization in manufacturing systems using process balancing approach. International Journal of Production Economics, 240, 108247. https://doi.org/10.1016/j.ijpe.2021.108247

Rayyan, M., & Mardiyana, D. (2025). Analisis engsel pintu box belakang truk jenis Mitshubishi Canter 125 PS menggunakan Autodesk Inventor. Prosiding TAU SNARS-TEK Seminar Nasional Rekayasa dan Teknologi, 5(1), 99–103. https://doi.org/10.47970/snarstek.v2i1.777

Santos, J. P., et al. (2019). Productivity improvement in sheet metal fabrication using lean manufacturing tools. Procedia Manufacturing, 38, 1111–1118. https://doi.org/10.1016/j.promfg.2020.01.093

Sari, N. H. (2017). Perlakuan panas pada baja karbon: Efek media pendinginan terhadap sifat mekanik dan struktur mikro. Jurnal Teknik Mesin (JTM), 6(4), 263–267. https://doi.org/10.22441/jtm.v6i4.2091

Zhao, C., Dinar, M., & Melkote, S. N. (2022). A data-driven framework for learning the capability of manufacturing process sequences. Journal of Manufacturing Systems, 64, 68–80. https://doi.org/10.1016/j.jmsy.2022.05.009