Fabrikasi Kawat Baja Pagar Berduri Galvanis Diameter 3 mm Kapasitas 100 m/Jam
Keywords:
3 mm Diameter Steel Wire, Barbed Wire, Fence, Galvanized, Wire DrawingAbstract
The vulnerability of security in various industrial, agricultural, and infrastructure sectors as well as areas that are not always under supervision is a problem faced. The purpose of fabrication is to obtain galvanized barbed wire fences with a diameter of 3 mm that is rust-resistant. The fabrication method includes: wire drawing through a die (die) from a diameter of 4 mm to 3 mm, passing the wire into molten Zinc at 450oC (hot dip galvanization) for 1 minute, making pieces of wire with sharp barbed ends of 40 mm and 70 mm long, inserting 1 piece of wire barb with a length of 40, and winding 1 piece of wire barb with a length of 70 mm around 3 pieces of wire body at every 15 cm distance of 3.8 turns, passing the barbed wire twist in molten Zinc for 1 minute, rolling the barbed wire, quality and dimension inspection. The fabrication results are in the form of 3 mm diameter galvanized barbed wire fences that are rust-resistant, the total production cost is IDR 11,500/m, and the production process duration is 36 seconds/m which implies that galvanized barbed wire fences can be used for protective fences in various industrial, agricultural, and infrastructure sectors and unsupervised areas.
References
Ahmad, A. A. R., Priyana, E. D. & Negoro, Y. P. (2023). Analisis Kualitas Hasil Produksi Kawat Baja Single Wire di PT XYZ dengan menggunakan Metode FMEA. Jurnal Serambi Engineering. 8(2), 5704-5710. DOI:https://doi.org/10.32672/jse.v8i2.6028
Anonim, (2017). ASM Handbook: Surface Engineering. ASM International.
Brown, T. (2018). Analysis of Wire Drawing Process and Material Deformation. Journal of Manufacturing Science, 45(2), 120-128.
Chen, L. (2022). Effect of Friction an Wire Drawing Process Efficiency. International Journal of Metal Forming, 10(3), 210-218.
Davis, J. R. (2018). Wire Technology: Process Engineering and Metallurgy. ASM International.
Groover, M. P. (2020). Fundamentals of Modern Manufacturing (7th ed.). Wiley.
Hadi, S., Irawan, B., Purwoko, Buwono, H. P., Murdani, A. & Zainuri, A. M. (2023). Desain Pagar Kawat Berduri Fleksibel sebagai Pembatas Area Berpondasi Beton, Pipa Galvanis dan Klem-U. Jurnal Pengabdian kepada Masyarakat, 12(1), 45-52. DOI: https://doi.org/10.30999/jpkm.v13i1.2458
Kumar, P. (2021). Metal Forming Processes and Applications in Wire Production. Materials Today Proceedings, 44, 1500-1505.
Lee, S. (2020). Study of Hot-Dip Galvanizing Parameters on Steel Wire. Surface Coating Technology Journal, 35(4), 300-308.
Herbirowo, S., Puspasari, V., Nugraha, H., Sulistiyo, E., Pramono, A. W. & Imaduddin, A. (2021). Fabrikasi Kawat Resistansi Nol Berbahan MgB2/Stainless Steel dengan Variasi Reduksi Ukuran melalui Pengerolan Dingin terhadap Karakteristik Mekanik dan Struktur Mikro. Energi dan Kelistrikan: Jurnal Ilmiah, 13(2), https://doi.org/10.33322/energi.v13i2.1491
Permatasari, R. (2023). Analisis Performa Mesin dalam Meningkatkan Efisiensi Produksi. Jurnal Teknologi Industri, 15(1), 60-68.
Pratama, A. (2022). Optimasi Proses Produksi pada Industri Manufaktur. Jurnal Rekayasa Industri, 11(3), 200-210.
Putra, B. (2019). Studi Fabrikasi Material Logam dalam Industri. Jurnal Teknik Mesin, 7(2), 75-82.
Rahman, F. (2023). Analisis Kualitas dan Efisiensi Produksi Industri Logam. Jurnal Manufaktur Indonesia, 14(1), 25-33.
Rizal, M. (2024). Studi Fabrikasi Kawat Berduri Galvanis dan Performa Mesin. Jurnal Teknik Mesin, 16(2), 48-62.
Santoso, J. (2020). Pengaruh Parameter Mesin terhadap Kapasitas Produksi. Jurnal Teknologi Manufaktur, 8(1), 33-40.
Pauzi, G. A., Anwar, S. Supriyanto, A. & Suciyati, S. W. (2021). Analisis Jembatan Garam Campuran Alumina dan Kalsium Karbonat pada Karakteristik Elektrik Pembangkit Listrik Sel Galvanis dengan Elektrolit Air Laut. Journal of Energy, Material, and Instrumentation Technology, 2(4), 125-132. https://jemit.fmipa.unila.ac.id/
Smith, J., & Lee, K. (2019). Steel Wire Manufacturing and Production Systems. International Journal of Industrial Engineering, 26(3), 145-152.
Wibowo, H. (2022). Penerapan Sistem Otomatisasi pada Industri Manufaktur. Jurnal Teknik Industri, 13(2), 90-98.
Zhang, Y. (2020). Corrosion Resistance of Galvanized Steel Wire. Journal of Materials Engineering, 55(5), 400-408.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
