Pembuatan Sabit Panjang 300 mm, Lebar 50 mm, Tebal 5 mm Kapasitas 0,5 Unit/Jam

Ahmad Alvino Satria Gama Ramadhani; Syamsul Hadi; Muhammad Firman Agustianto; Kafii Widhyadhana; Nayyaka Kalingga Putra

doi:10.61132/globe.v4i2.1416

Pembuatan Sabit Panjang 300 mm, Lebar 50 mm, Tebal 5 mm Kapasitas 0,5 Unit/Jam

Authors

Ahmad Alvino Satria Gama Ramadhani Politeknik Negeri Malang
Syamsul Hadi Politeknik Negeri Malang
Muhammad Firman Agustianto Politeknik Negeri Malang
Kafii Widhyadhana Politeknik Negeri Malang
Nayyaka Kalingga Putra Politeknik Negeri Malang

DOI:

https://doi.org/10.61132/globe.v4i2.1416

Keywords:

Farmer's Sickle, Forging, Hardening, Medium Carbon Steel, Wooden Handle

Abstract

Broken, bent, and fast wear of farmer's sickle as a problem in its use. The purpose of making is to get a sickle that is not easily broken, not easily bent, and relatively wear resistant. The manufacturing method is through: sickle design measuring 300x250 mm with a sickle width of 50 mm, and a thickness of 5 mm thinning towards the sharp side of the sickle, turning the teak wood handle, trial cutting of medium carbon steel material, AISI 1045 size 20 x 25 x 6 mm or equivalent to 3000 mm3, forging at a temperature of 800-1000 ° C, hardening into a water cooling medium, making a locking ring with copper welding, turning the wooden handle, installing a steel locking ring between the sickle root and the wooden handle, finishing with painting the handle according to the order, and checking the quality and dimensions. The result of the production is a sickle with dimensions of 300x250 mm with a width of 50 mm, and a thickness of 5 mm with a wooden handle, the manufacturing cost is IDR 84,000/unit which requires a production time of 120 minutes/unit which has an impact on the use of the sickle for cutting grass and the like, it can be used for up to around 4 years.

References

Agung, A. A. R., Kurniawan, E. D., & Hermawan, R. (2023). Pengaruh variasi media pendingin quenching terhadap kekerasan baja AISI 1045. Jurnal Pendidikan Teknik Mesin Undiksha, 11(1), 124–130. https://doi.org/10.23887/jptm.v11i1

Agustian, E. (2021). Analisis pengaruh media pendingin dengan kombinasi waktu penahanan pendingin terhadap nilai kekerasan baja AISI 1045 pada proses quenching. Manutech: Jurnal Teknologi Manufaktur, 13(1), 25–32. https://doi.org/10.33504/manutech.v13i01.169

Badji, R., Cheniti, B., Kahloun, C., Chauveau, T., Hadji, M., & Bacroix, B. (2021). Microstructure, mechanical behavior, and crystallographic texture in a hot forged dual-phase stainless steel. The International Journal of Advanced Manufacturing Technology, 116(3), 1115–1132. https://doi.org/10.1007/s00170-021-07502-8

Faris, M. S. A., & Rasyid, A. H. A. (2023). Pengaruh variasi media pendingin terhadap nilai kekerasan dan ketangguhan baja AISI 1045 aplikasi poros motor. Jurnal Teknik Mesin, 11(3), 165–170. https://doi.org/10.26740/jtm.v11n03.p165-170

Hariningsih, H., Daryanto, T., & Lutiyatmi, L. (2022). Pengaruh variasi media quenching dan tempering terhadap struktur mikro dan kekerasan baja AISI 1045. Creative Research in Engineering (CERIE), 2(2), 52–62. https://doi.org/10.30595/cerie.v2i2.14317

Hartanto, D. E., Supriadi, H., & Savetlana, S. (2020). Pengaruh media pendingin yang tersirkulasi pada proses quenching terhadap kekerasan dan ketahanan aus pada baja AISI 1045. Prosiding Seminar Nasional Ilmu Teknik dan Aplikasi Industri Fakultas Teknik Universitas Lampung, 3, 1–4. https://doi.org/10.23960/prosidingsinta.v3i.12

Haryadi, G. D., Utomo, A. F., & Ekaputra, I. M. W. (2021). Pengaruh variasi temperatur quenching dan media pendingin terhadap tingkat kekerasan baja AISI 1045. Jurnal Rekayasa Mesin, 16(2), 255–264. https://doi.org/10.32497/jrm.v16i2.2633

Hawryluk, M., Gronostajski, Z., Zwierzchowski, M., Jabłoński, P., Barełkowski, A., Krawczyk, J., Jaśkiewicz, K., & Rychlik, M. (2020). Application of a prototype thermoplastic treatment line in order to design a thermal treatment process of forgings with the use of the heat from the forging process. Materials, 13(11), Article 2441. https://doi.org/10.3390/ma13112441

Kitayama, S. (2024). Technical review on design optimization in forging. The International Journal of Advanced Manufacturing Technology, 132(9), 4161–4189. https://doi.org/10.1007/s00170-024-XXXXX

Mahaya, A. M., Milad, M. M., & Salem, M. M. (2021). The influence of temperature and soaking time on the microstructure and mechanical properties of annealed AISI 1045 steel. مجلة الجامعة الأسمرية للعلوم التطبيقية, 6(2), 77–90. https://doi.org/10.59743/aujas.v6i2.764

Mukhrim, G. A., Jasman, J., Nurdin, H., Abadi, Z., & Indrawan, E. (2022). Pengaruh proses quenching terhadap kekuatan tarik baja karbon sedang AISI 1045. Jurnal Vokasi Mekanika, 4(4), 56–62. https://doi.org/10.24036/vomek.v4i4.436

Mustofa, H. (2019). Pengaruh temperatur tempering terhadap kekerasan dan struktur mikro baja AISI 1045 yang diquenching dalam media pendingin tersirkulasi [Skripsi, Universitas Lampung]. http://digilib.unila.ac.id/id/eprint/58706

Nota, N. A. S., Azis, A., Budianti, S. I., & Sampurno, C. B. K. (2025). Pengaruh proses quenching dengan variasi media pendingin terhadap sifat mekanik dan struktur mikro baja AISI 1045. Journal of Science & Engineering, 5(1), 140–144. https://doi.org/10.1080/02670836.2015.1110876

Rasyid, S., Ahmad, A., Ramadhani, M. S., & Herdin, I. (2019). Pengaruh variasi quenching bertingkat pada baja AISI 1045 dengan menggunakan media pendingin oli SAE-20W dan air terhadap sifat mekanik dan struktur mikro. Jurnal Teknik Mesin Sinergi, 16(2), 151–161. https://doi.org/10.31963/sinergi.v16i2.1510

Rohmah, M., Paristiawan, P. A., & Romijarso, T. B. (2022). Pengaruh beban tempa dan proses perlakuan panas terhadap perilaku korosi A588–1% Ni untuk aplikasi baja tahan cuaca di lingkungan laut. Sinergi, 26(2), 237–248. https://doi.org/10.22441/sinergi.2022.2.013

Silveira, A. C. D. F., Bevilaqua, W. L., Dias, V. W., de Castro, P. J., Epp, J., & Rocha, A. D. S. (2020). Influence of hot forging parameters on a low carbon continuous cooling bainitic steel microstructure. Metals, 10(5), Article 601. https://doi.org/10.3390/met10050601

Singh, S., Samir, S., Kumar, K., & Thapa, S. (2021). Effect of heat treatment processes on the mechanical properties of AISI 1045 steel. Materials Today: Proceedings, 45, 5097–5101. https://doi.org/10.1016/j.matpr.2021.01.590

Škůrková, K. L., Fidlerová, H., Niciejewska, M., & Idzikowski, A. (2023). Quality improvement of the forging process using Pareto analysis and 8D methodology in automotive manufacturing: A case study. Standards, 3(1), 84–94. https://doi.org/10.3390/standards3010008

Vieira, E. D. R., Biehl, L. V., Medeiros, J. L. B., Costa, V. M., & Macedo, R. J. (2021). Evaluation of the characteristics of an AISI 1045 steel quenched in different concentrations of polyvinylpyrrolidone polymer solutions. Scientific Reports, 11(1), Article 1313. https://doi.org/10.1038/s41598-020-79060-0

Yuwita, P. E., Habib, A., & Faila, R. N. (2024). Studi pengaruh variasi media pendingin quenching dan waktu penahanan pada proses heat treatment terhadap kekerasan baja AISI 1045. Jurnal Rekayasa Mesin, 19(1), 77–84. https://doi.org/10.32497/jrm.v19i1.4960

Zhong, L., Wang, B., Hu, C., Zhang, J., & Yao, Y. (2021). Hot deformation behavior and dynamic recrystallization of ultra-high-strength steel. Metals, 11(8), Article 1239. https://doi.org/10.3390/met11081239

Downloads

Published

2026-05-30

How to Cite

Ahmad Alvino Satria Gama Ramadhani, Syamsul Hadi, Muhammad Firman Agustianto, Kafii Widhyadhana, & Nayyaka Kalingga Putra. (2026). Pembuatan Sabit Panjang 300 mm, Lebar 50 mm, Tebal 5 mm Kapasitas 0,5 Unit/Jam. Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan, 4(2), 198–208. https://doi.org/10.61132/globe.v4i2.1416